rtl8187: move pll reset at start out of ANAPARAM write

On 8187B start, comment about pll reset, and move it out of ANAPARAM
write sequence, so that code is more readable.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rtl818x/rtl8187_dev.c

@@ -742,7 +742,6 @@ static int rtl8187b_init_hw(struct ieee80211_hw *dev)
 
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
 			 RTL818X_EEPROM_CMD_CONFIG);
-
 	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
 	reg |= RTL818X_CONFIG3_ANAPARAM_WRITE | RTL818X_CONFIG3_GNT_SELECT;
 	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
@@ -752,19 +751,19 @@ static int rtl8187b_init_hw(struct ieee80211_hw *dev)
 			  RTL8187B_RTL8225_ANAPARAM_ON);
 	rtl818x_iowrite8(priv, &priv->map->ANAPARAM3,
 			 RTL8187B_RTL8225_ANAPARAM3_ON);
-
-	rtl818x_iowrite8(priv, (u8 *)0xFF61, 0x10);
-	reg = rtl818x_ioread8(priv, (u8 *)0xFF62);
-	rtl818x_iowrite8(priv, (u8 *)0xFF62, reg & ~(1 << 5));
-	rtl818x_iowrite8(priv, (u8 *)0xFF62, reg | (1 << 5));
-
 	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
 	reg &= ~RTL818X_CONFIG3_ANAPARAM_WRITE;
 	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
-
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
 			 RTL818X_EEPROM_CMD_NORMAL);
 
+	/* Reset PLL sequence on 8187B. Realtek note: reduces power
+	 * consumption about 30 mA */
+	rtl818x_iowrite8(priv, (u8 *)0xFF61, 0x10);
+	reg = rtl818x_ioread8(priv, (u8 *)0xFF62);
+	rtl818x_iowrite8(priv, (u8 *)0xFF62, reg & ~(1 << 5));
+	rtl818x_iowrite8(priv, (u8 *)0xFF62, reg | (1 << 5));
+
 	res = rtl8187_cmd_reset(dev);
 	if (res)
 		return res;