Commit 89c65417 authored by Billy Tsai's avatar Billy Tsai Committed by Jonathan Cameron

iio: adc: aspeed: Keep model data to driver data.

Keep the model data pointer to driver data for reducing the usage of
of_device_get_match_data().
Signed-off-by: default avatarBilly Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20210922081520.30580-2-billy_tsai@aspeedtech.comSigned-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent f840f41f
......@@ -77,6 +77,7 @@ struct aspeed_adc_model_data {
struct aspeed_adc_data {
struct device *dev;
const struct aspeed_adc_model_data *model_data;
void __iomem *base;
spinlock_t clk_lock;
struct clk_hw *clk_prescaler;
......@@ -118,8 +119,6 @@ static int aspeed_adc_read_raw(struct iio_dev *indio_dev,
int *val, int *val2, long mask)
{
struct aspeed_adc_data *data = iio_priv(indio_dev);
const struct aspeed_adc_model_data *model_data =
of_device_get_match_data(data->dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
......@@ -127,7 +126,7 @@ static int aspeed_adc_read_raw(struct iio_dev *indio_dev,
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = model_data->vref_voltage;
*val = data->model_data->vref_voltage;
*val2 = ASPEED_RESOLUTION_BITS;
return IIO_VAL_FRACTIONAL_LOG2;
......@@ -146,13 +145,11 @@ static int aspeed_adc_write_raw(struct iio_dev *indio_dev,
int val, int val2, long mask)
{
struct aspeed_adc_data *data = iio_priv(indio_dev);
const struct aspeed_adc_model_data *model_data =
of_device_get_match_data(data->dev);
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
if (val < model_data->min_sampling_rate ||
val > model_data->max_sampling_rate)
if (val < data->model_data->min_sampling_rate ||
val > data->model_data->max_sampling_rate)
return -EINVAL;
clk_set_rate(data->clk_scaler->clk,
......@@ -198,7 +195,6 @@ static int aspeed_adc_probe(struct platform_device *pdev)
{
struct iio_dev *indio_dev;
struct aspeed_adc_data *data;
const struct aspeed_adc_model_data *model_data;
const char *clk_parent_name;
int ret;
u32 adc_engine_control_reg_val;
......@@ -209,6 +205,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
data = iio_priv(indio_dev);
data->dev = &pdev->dev;
data->model_data = of_device_get_match_data(&pdev->dev);
data->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(data->base))
......@@ -248,9 +245,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
}
reset_control_deassert(data->rst);
model_data = of_device_get_match_data(&pdev->dev);
if (model_data->wait_init_sequence) {
if (data->model_data->wait_init_sequence) {
/* Enable engine in normal mode. */
writel(FIELD_PREP(ASPEED_ADC_OP_MODE,
ASPEED_ADC_OP_MODE_NORMAL) |
......@@ -280,8 +275,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
writel(adc_engine_control_reg_val,
data->base + ASPEED_REG_ENGINE_CONTROL);
model_data = of_device_get_match_data(&pdev->dev);
indio_dev->name = model_data->model_name;
indio_dev->name = data->model_data->model_name;
indio_dev->info = &aspeed_adc_iio_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = aspeed_adc_iio_channels;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment