Merge tag 'usb-3.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 3.11-rc6 that have accumulated.

  Nothing huge, a EHCI fix that solves a much-reported audio USB
  problem, some usb-serial driver endian fixes and other minor fixes, a
  wireless USB oops fix, and two new quirks"

* tag 'usb-3.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: keyspan: fix null-deref at disconnect and release
  USB: mos7720: fix broken control requests
  usb: add two quirky touchscreen
  USB: ti_usb_3410_5052: fix big-endian firmware handling
  USB: adutux: fix big-endian device-type reporting
  USB: usbtmc: fix big-endian probe of Rigol devices
  USB: mos7840: fix big-endian probe
  USB-Serial: Fix error handling of usb_wwan
  wusbcore: fix kernel panic when disconnecting a wireless USB->serial device
  USB: EHCI: accept very late isochronous URBs

drivers/usb/class/usbtmc.c

@@ -1119,11 +1119,11 @@ static int usbtmc_probe(struct usb_interface *intf,
 	/* Determine if it is a Rigol or not */
 	data->rigol_quirk = 0;
 	dev_dbg(&intf->dev, "Trying to find if device Vendor 0x%04X Product 0x%04X has the RIGOL quirk\n",
-		data->usb_dev->descriptor.idVendor,
-		data->usb_dev->descriptor.idProduct);
+		le16_to_cpu(data->usb_dev->descriptor.idVendor),
+		le16_to_cpu(data->usb_dev->descriptor.idProduct));
 	for(n = 0; usbtmc_id_quirk[n].idVendor > 0; n++) {
-		if ((usbtmc_id_quirk[n].idVendor == data->usb_dev->descriptor.idVendor) &&
-		    (usbtmc_id_quirk[n].idProduct == data->usb_dev->descriptor.idProduct)) {
+		if ((usbtmc_id_quirk[n].idVendor == le16_to_cpu(data->usb_dev->descriptor.idVendor)) &&
+		    (usbtmc_id_quirk[n].idProduct == le16_to_cpu(data->usb_dev->descriptor.idProduct))) {
 			dev_dbg(&intf->dev, "Setting this device as having the RIGOL quirk\n");
 			data->rigol_quirk = 1;
 			break;

drivers/usb/core/quirks.c

@@ -78,6 +78,12 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x04d8, 0x000c), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
 
+	/* CarrolTouch 4000U */
+	{ USB_DEVICE(0x04e7, 0x0009), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* CarrolTouch 4500U */
+	{ USB_DEVICE(0x04e7, 0x0030), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Samsung Android phone modem - ID conflict with SPH-I500 */
 	{ USB_DEVICE(0x04e8, 0x6601), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },

drivers/usb/host/ehci-sched.c

@@ -1391,21 +1391,20 @@ iso_stream_schedule (
 
 		/* Behind the scheduling threshold? */
 		if (unlikely(start < next)) {
+			unsigned now2 = (now - base) & (mod - 1);
 
 			/* USB_ISO_ASAP: Round up to the first available slot */
 			if (urb->transfer_flags & URB_ISO_ASAP)
 				start += (next - start + period - 1) & -period;
 
 			/*
-			 * Not ASAP: Use the next slot in the stream.  If
-			 * the entire URB falls before the threshold, fail.
+			 * Not ASAP: Use the next slot in the stream,
+			 * no matter what.
 			 */
-			else if (start + span - period < next) {
-				ehci_dbg(ehci, "iso urb late %p (%u+%u < %u)\n",
+			else if (start + span - period < now2) {
+				ehci_dbg(ehci, "iso underrun %p (%u+%u < %u)\n",
 						urb, start + base,
-						span - period, next + base);
-				status = -EXDEV;
-				goto fail;
+						span - period, now2 + base);
 			}
 		}
 

drivers/usb/misc/adutux.c

@@ -830,7 +830,7 @@ static int adu_probe(struct usb_interface *interface,
 
 	/* let the user know what node this device is now attached to */
 	dev_info(&interface->dev, "ADU%d %s now attached to /dev/usb/adutux%d\n",
-		 udev->descriptor.idProduct, dev->serial_number,
+		 le16_to_cpu(udev->descriptor.idProduct), dev->serial_number,
 		 (dev->minor - ADU_MINOR_BASE));
 exit:
 	dbg(2, " %s : leave, return value %p (dev)", __func__, dev);

drivers/usb/serial/keyspan.c

@@ -2303,7 +2303,7 @@ static int keyspan_startup(struct usb_serial *serial)
 	if (d_details == NULL) {
 		dev_err(&serial->dev->dev, "%s - unknown product id %x\n",
 		    __func__, le16_to_cpu(serial->dev->descriptor.idProduct));
-		return 1;
+		return -ENODEV;
 	}
 
 	/* Setup private data for serial driver */

drivers/usb/serial/mos7720.c

@@ -90,6 +90,7 @@ struct urbtracker {
 	struct list_head        urblist_entry;
 	struct kref             ref_count;
 	struct urb              *urb;
+	struct usb_ctrlrequest	*setup;
 };
 
 enum mos7715_pp_modes {
@@ -271,6 +272,7 @@ static void destroy_urbtracker(struct kref *kref)
 	struct mos7715_parport *mos_parport = urbtrack->mos_parport;
 
 	usb_free_urb(urbtrack->urb);
+	kfree(urbtrack->setup);
 	kfree(urbtrack);
 	kref_put(&mos_parport->ref_count, destroy_mos_parport);
 }
@@ -355,7 +357,6 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
 	struct urbtracker *urbtrack;
 	int ret_val;
 	unsigned long flags;
-	struct usb_ctrlrequest setup;
 	struct usb_serial *serial = mos_parport->serial;
 	struct usb_device *usbdev = serial->dev;
 
@@ -373,14 +374,20 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
 		kfree(urbtrack);
 		return -ENOMEM;
 	}
-	setup.bRequestType = (__u8)0x40;
-	setup.bRequest = (__u8)0x0e;
-	setup.wValue = get_reg_value(reg, dummy);
-	setup.wIndex = get_reg_index(reg);
-	setup.wLength = 0;
+	urbtrack->setup = kmalloc(sizeof(*urbtrack->setup), GFP_KERNEL);
+	if (!urbtrack->setup) {
+		usb_free_urb(urbtrack->urb);
+		kfree(urbtrack);
+		return -ENOMEM;
+	}
+	urbtrack->setup->bRequestType = (__u8)0x40;
+	urbtrack->setup->bRequest = (__u8)0x0e;
+	urbtrack->setup->wValue = get_reg_value(reg, dummy);
+	urbtrack->setup->wIndex = get_reg_index(reg);
+	urbtrack->setup->wLength = 0;
 	usb_fill_control_urb(urbtrack->urb, usbdev,
 			     usb_sndctrlpipe(usbdev, 0),
-			     (unsigned char *)&setup,
+			     (unsigned char *)urbtrack->setup,
 			     NULL, 0, async_complete, urbtrack);
 	kref_init(&urbtrack->ref_count);
 	INIT_LIST_HEAD(&urbtrack->urblist_entry);

drivers/usb/serial/mos7840.c

@@ -2193,7 +2193,7 @@ static int mos7810_check(struct usb_serial *serial)
 static int mos7840_probe(struct usb_serial *serial,
 				const struct usb_device_id *id)
 {
-	u16 product = serial->dev->descriptor.idProduct;
+	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
 	u8 *buf;
 	int device_type;
 

drivers/usb/serial/ti_usb_3410_5052.c

@@ -1536,14 +1536,15 @@ static int ti_download_firmware(struct ti_device *tdev)
 	char buf[32];
 
 	/* try ID specific firmware first, then try generic firmware */
-	sprintf(buf, "ti_usb-v%04x-p%04x.fw", dev->descriptor.idVendor,
-	    dev->descriptor.idProduct);
+	sprintf(buf, "ti_usb-v%04x-p%04x.fw",
+			le16_to_cpu(dev->descriptor.idVendor),
+			le16_to_cpu(dev->descriptor.idProduct));
 	status = request_firmware(&fw_p, buf, &dev->dev);
 
 	if (status != 0) {
 		buf[0] = '\0';
-		if (dev->descriptor.idVendor == MTS_VENDOR_ID) {
-			switch (dev->descriptor.idProduct) {
+		if (le16_to_cpu(dev->descriptor.idVendor) == MTS_VENDOR_ID) {
+			switch (le16_to_cpu(dev->descriptor.idProduct)) {
 			case MTS_CDMA_PRODUCT_ID:
 				strcpy(buf, "mts_cdma.fw");
 				break;

drivers/usb/serial/usb_wwan.c

@@ -291,18 +291,18 @@ static void usb_wwan_indat_callback(struct urb *urb)
 			tty_flip_buffer_push(&port->port);
 		} else
 			dev_dbg(dev, "%s: empty read urb received\n", __func__);
-
-		/* Resubmit urb so we continue receiving */
-		err = usb_submit_urb(urb, GFP_ATOMIC);
-		if (err) {
-			if (err != -EPERM) {
-				dev_err(dev, "%s: resubmit read urb failed. (%d)\n", __func__, err);
-				/* busy also in error unless we are killed */
-				usb_mark_last_busy(port->serial->dev);
-			}
-		} else {
+	}
+	/* Resubmit urb so we continue receiving */
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err) {
+		if (err != -EPERM) {
+			dev_err(dev, "%s: resubmit read urb failed. (%d)\n",
+				__func__, err);
+			/* busy also in error unless we are killed */
 			usb_mark_last_busy(port->serial->dev);
 		}
+	} else {
+		usb_mark_last_busy(port->serial->dev);
 	}
 }
 

drivers/usb/wusbcore/wa-xfer.c

@@ -1226,6 +1226,12 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb)
 	}
 	spin_lock_irqsave(&xfer->lock, flags);
 	rpipe = xfer->ep->hcpriv;
+	if (rpipe == NULL) {
+		pr_debug("%s: xfer id 0x%08X has no RPIPE.  %s",
+			__func__, wa_xfer_id(xfer),
+			"Probably already aborted.\n" );
+		goto out_unlock;
+	}
 	/* Check the delayed list -> if there, release and complete */
 	spin_lock_irqsave(&wa->xfer_list_lock, flags2);
 	if (!list_empty(&xfer->list_node) && xfer->seg == NULL)
@@ -1644,8 +1650,7 @@ static void wa_xfer_result_cb(struct urb *urb)
 			break;
 		}
 		usb_status = xfer_result->bTransferStatus & 0x3f;
-		if (usb_status == WA_XFER_STATUS_ABORTED
-		    || usb_status == WA_XFER_STATUS_NOT_FOUND)
+		if (usb_status == WA_XFER_STATUS_NOT_FOUND)
 			/* taken care of already */
 			break;
 		xfer_id = xfer_result->dwTransferID;