ASoC: fsl_micfil: Driver updates

Merge series from Sascha Hauer <s.hauer@pengutronix.de>:

Cleanups for the fsl_micfil driver.

drivers/dma/imx-dma.c

@@ -25,7 +25,7 @@
 #include <linux/of_dma.h>
 
 #include <asm/irq.h>
-#include <linux/platform_data/dma-imx.h>
+#include <linux/dma/imx-dma.h>
 
 #include "dmaengine.h"
 #define IMXDMA_MAX_CHAN_DESCRIPTORS	16

drivers/dma/imx-sdma.c

@@ -14,6 +14,7 @@
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/types.h>
+#include <linux/bitfield.h>
 #include <linux/bitops.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
@@ -35,7 +36,7 @@
 #include <linux/workqueue.h>
 
 #include <asm/irq.h>
-#include <linux/platform_data/dma-imx.h>
+#include <linux/dma/imx-dma.h>
 #include <linux/regmap.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
@@ -73,6 +74,7 @@
 #define SDMA_CHNENBL0_IMX35	0x200
 #define SDMA_CHNENBL0_IMX31	0x080
 #define SDMA_CHNPRI_0		0x100
+#define SDMA_DONE0_CONFIG	0x1000
 
 /*
  * Buffer descriptor status values.
@@ -180,6 +182,12 @@
 				 BIT(DMA_MEM_TO_DEV) | \
 				 BIT(DMA_DEV_TO_DEV))
 
+#define SDMA_WATERMARK_LEVEL_N_FIFOS	GENMASK(15, 12)
+#define SDMA_WATERMARK_LEVEL_SW_DONE	BIT(23)
+
+#define SDMA_DONE0_CONFIG_DONE_SEL	BIT(7)
+#define SDMA_DONE0_CONFIG_DONE_DIS	BIT(6)
+
 /**
  * struct sdma_script_start_addrs - SDMA script start pointers
  *
@@ -441,6 +449,9 @@ struct sdma_channel {
 	struct work_struct		terminate_worker;
 	struct list_head                terminated;
 	bool				is_ram_script;
+	unsigned int			n_fifos_src;
+	unsigned int			n_fifos_dst;
+	bool				sw_done;
 };
 
 #define IMX_DMA_SG_LOOP		BIT(0)
@@ -778,6 +789,14 @@ static void sdma_event_enable(struct sdma_channel *sdmac, unsigned int event)
 	val = readl_relaxed(sdma->regs + chnenbl);
 	__set_bit(channel, &val);
 	writel_relaxed(val, sdma->regs + chnenbl);
+
+	/* Set SDMA_DONEx_CONFIG is sw_done enabled */
+	if (sdmac->sw_done) {
+		val = readl_relaxed(sdma->regs + SDMA_DONE0_CONFIG);
+		val |= SDMA_DONE0_CONFIG_DONE_SEL;
+		val &= ~SDMA_DONE0_CONFIG_DONE_DIS;
+		writel_relaxed(val, sdma->regs + SDMA_DONE0_CONFIG);
+	}
 }
 
 static void sdma_event_disable(struct sdma_channel *sdmac, unsigned int event)
@@ -940,7 +959,7 @@ static irqreturn_t sdma_int_handler(int irq, void *dev_id)
 /*
  * sets the pc of SDMA script according to the peripheral type
  */
-static void sdma_get_pc(struct sdma_channel *sdmac,
+static int sdma_get_pc(struct sdma_channel *sdmac,
 		enum sdma_peripheral_type peripheral_type)
 {
 	struct sdma_engine *sdma = sdmac->sdma;
@@ -1038,14 +1057,22 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
 	case IMX_DMATYPE_IPU_MEMORY:
 		emi_2_per = sdma->script_addrs->ext_mem_2_ipu_addr;
 		break;
-	default:
+	case IMX_DMATYPE_MULTI_SAI:
+		per_2_emi = sdma->script_addrs->sai_2_mcu_addr;
+		emi_2_per = sdma->script_addrs->mcu_2_sai_addr;
 		break;
+	default:
+		dev_err(sdma->dev, "Unsupported transfer type %d\n",
+			peripheral_type);
+		return -EINVAL;
 	}
 
 	sdmac->pc_from_device = per_2_emi;
 	sdmac->pc_to_device = emi_2_per;
 	sdmac->device_to_device = per_2_per;
 	sdmac->pc_to_pc = emi_2_emi;
+
+	return 0;
 }
 
 static int sdma_load_context(struct sdma_channel *sdmac)
@@ -1210,9 +1237,26 @@ static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
 	sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_CONT;
 }
 
+static void sdma_set_watermarklevel_for_sais(struct sdma_channel *sdmac)
+{
+	unsigned int n_fifos;
+
+	if (sdmac->sw_done)
+		sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_SW_DONE;
+
+	if (sdmac->direction == DMA_DEV_TO_MEM)
+		n_fifos = sdmac->n_fifos_src;
+	else
+		n_fifos = sdmac->n_fifos_dst;
+
+	sdmac->watermark_level |=
+			FIELD_PREP(SDMA_WATERMARK_LEVEL_N_FIFOS, n_fifos);
+}
+
 static int sdma_config_channel(struct dma_chan *chan)
 {
 	struct sdma_channel *sdmac = to_sdma_chan(chan);
+	int ret;
 
 	sdma_disable_channel(chan);
 
@@ -1233,7 +1277,9 @@ static int sdma_config_channel(struct dma_chan *chan)
 		break;
 	}
 
-	sdma_get_pc(sdmac, sdmac->peripheral_type);
+	ret = sdma_get_pc(sdmac, sdmac->peripheral_type);
+	if (ret)
+		return ret;
 
 	if ((sdmac->peripheral_type != IMX_DMATYPE_MEMORY) &&
 			(sdmac->peripheral_type != IMX_DMATYPE_DSP)) {
@@ -1243,6 +1289,10 @@ static int sdma_config_channel(struct dma_chan *chan)
 			    sdmac->peripheral_type == IMX_DMATYPE_ASRC)
 				sdma_set_watermarklevel_for_p2p(sdmac);
 		} else {
+			if (sdmac->peripheral_type ==
+					IMX_DMATYPE_MULTI_SAI)
+				sdma_set_watermarklevel_for_sais(sdmac);
+
 			__set_bit(sdmac->event_id0, sdmac->event_mask);
 		}
 
@@ -1349,7 +1399,9 @@ static int sdma_alloc_chan_resources(struct dma_chan *chan)
 		mem_data.dma_request2 = 0;
 		data = &mem_data;
 
-		sdma_get_pc(sdmac, IMX_DMATYPE_MEMORY);
+		ret = sdma_get_pc(sdmac, IMX_DMATYPE_MEMORY);
+		if (ret)
+			return ret;
 	}
 
 	switch (data->priority) {
@@ -1698,9 +1750,23 @@ static int sdma_config(struct dma_chan *chan,
 		       struct dma_slave_config *dmaengine_cfg)
 {
 	struct sdma_channel *sdmac = to_sdma_chan(chan);
+	struct sdma_engine *sdma = sdmac->sdma;
 
 	memcpy(&sdmac->slave_config, dmaengine_cfg, sizeof(*dmaengine_cfg));
 
+	if (dmaengine_cfg->peripheral_config) {
+		struct sdma_peripheral_config *sdmacfg = dmaengine_cfg->peripheral_config;
+		if (dmaengine_cfg->peripheral_size != sizeof(struct sdma_peripheral_config)) {
+			dev_err(sdma->dev, "Invalid peripheral size %zu, expected %zu\n",
+				dmaengine_cfg->peripheral_size,
+				sizeof(struct sdma_peripheral_config));
+			return -EINVAL;
+		}
+		sdmac->n_fifos_src = sdmacfg->n_fifos_src;
+		sdmac->n_fifos_dst = sdmacfg->n_fifos_dst;
+		sdmac->sw_done = sdmacfg->sw_done;
+	}
+
 	/* Set ENBLn earlier to make sure dma request triggered after that */
 	if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events)
 		return -EINVAL;

drivers/mmc/host/mxcmmc.c

@@ -39,7 +39,7 @@
 #include <asm/irq.h>
 #include <linux/platform_data/mmc-mxcmmc.h>
 
-#include <linux/platform_data/dma-imx.h>
+#include <linux/dma/imx-dma.h>
 
 #define DRIVER_NAME "mxc-mmc"
 #define MXCMCI_TIMEOUT_MS 10000

drivers/spi/spi-fsl-lpspi.c

@@ -20,7 +20,7 @@
 #include <linux/of_device.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
-#include <linux/platform_data/dma-imx.h>
+#include <linux/dma/imx-dma.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
 #include <linux/spi/spi.h>

drivers/spi/spi-imx.c

@@ -24,7 +24,7 @@
 #include <linux/of_device.h>
 #include <linux/property.h>
 
-#include <linux/platform_data/dma-imx.h>
+#include <linux/dma/imx-dma.h>
 
 #define DRIVER_NAME "spi_imx"
 

drivers/tty/serial/imx.c

@@ -30,7 +30,7 @@
 #include <linux/dma-mapping.h>
 
 #include <asm/irq.h>
-#include <linux/platform_data/dma-imx.h>
+#include <linux/dma/imx-dma.h>
 
 #include "serial_mctrl_gpio.h"
 

drivers/video/fbdev/mx3fb.c

@@ -26,7 +26,7 @@
 #include <linux/dma/ipu-dma.h>
 #include <linux/backlight.h>
 
-#include <linux/platform_data/dma-imx.h>
+#include <linux/dma/imx-dma.h>
 #include <linux/platform_data/video-mx3fb.h>
 
 #include <asm/io.h>

include/linux/platform_data/dma-imx.h → include/linux/dma/imx-dma.h

@@ -3,8 +3,8 @@
  * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
  */
 
-#ifndef __ASM_ARCH_MXC_DMA_H__
-#define __ASM_ARCH_MXC_DMA_H__
+#ifndef __LINUX_DMA_IMX_H
+#define __LINUX_DMA_IMX_H
 
 #include <linux/scatterlist.h>
 #include <linux/device.h>
@@ -39,6 +39,7 @@ enum sdma_peripheral_type {
 	IMX_DMATYPE_SSI_DUAL,	/* SSI Dual FIFO */
 	IMX_DMATYPE_ASRC_SP,	/* Shared ASRC */
 	IMX_DMATYPE_SAI,	/* SAI */
+	IMX_DMATYPE_MULTI_SAI,	/* MULTI FIFOs For Audio */
 };
 
 enum imx_dma_prio {
@@ -65,4 +66,23 @@ static inline int imx_dma_is_general_purpose(struct dma_chan *chan)
 		!strcmp(chan->device->dev->driver->name, "imx-dma");
 }
 
-#endif
+/**
+ * struct sdma_peripheral_config - SDMA config for audio
+ * @n_fifos_src: Number of FIFOs for recording
+ * @n_fifos_dst: Number of FIFOs for playback
+ * @sw_done: Use software done. Needed for PDM (micfil)
+ *
+ * Some i.MX Audio devices (SAI, micfil) have multiple successive FIFO
+ * registers. For multichannel recording/playback the SAI/micfil have
+ * one FIFO register per channel and the SDMA engine has to read/write
+ * the next channel from/to the next register and wrap around to the
+ * first register when all channels are handled. The number of active
+ * channels must be communicated to the SDMA engine using this struct.
+ */
+struct sdma_peripheral_config {
+	int n_fifos_src;
+	int n_fifos_dst;
+	bool sw_done;
+};
+
+#endif /* __LINUX_DMA_IMX_H */

sound/soc/fsl/fsl_asrc.c

@@ -11,7 +11,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
-#include <linux/platform_data/dma-imx.h>
+#include <linux/dma/imx-dma.h>
 #include <linux/pm_runtime.h>
 #include <sound/dmaengine_pcm.h>
 #include <sound/pcm_params.h>

sound/soc/fsl/fsl_asrc_dma.c

@@ -8,7 +8,7 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/module.h>
-#include <linux/platform_data/dma-imx.h>
+#include <linux/dma/imx-dma.h>
 #include <sound/dmaengine_pcm.h>
 #include <sound/pcm_params.h>
 

sound/soc/fsl/fsl_easrc.h

@@ -7,7 +7,7 @@
 #define _FSL_EASRC_H
 
 #include <sound/asound.h>
-#include <linux/platform_data/dma-imx.h>
+#include <linux/dma/imx-dma.h>
 
 #include "fsl_asrc_common.h"
 

sound/soc/fsl/imx-pcm.h

@@ -9,7 +9,7 @@
 #ifndef _IMX_PCM_H
 #define _IMX_PCM_H
 
-#include <linux/platform_data/dma-imx.h>
+#include <linux/dma/imx-dma.h>
 
 /*
  * Do not change this as the FIQ handler depends on this size

sound/soc/fsl/imx-ssi.h

@@ -182,7 +182,7 @@
 #define DRV_NAME "imx-ssi"
 
 #include <linux/dmaengine.h>
-#include <linux/platform_data/dma-imx.h>
+#include <linux/dma/imx-dma.h>
 #include <sound/dmaengine_pcm.h>
 #include "imx-pcm.h"