Merge tag 'imx-fixes-5.12-2' of...

Merge tag 'imx-fixes-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.12, round 2:

- Fix a system failure on imx6qdl-phytec-pfla02 board when booting from
  SD, by adding missing vmmc supply for SD interfaces.
- Fix address typo in i.MX8MM/Q IOMUXC_SD1_DATA0_GPIO2_IO2 definition.

* tag 'imx-fixes-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces
  arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0

Link: https://lore.kernel.org/r/20210330090236.GQ22955@dragonSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi

@@ -433,6 +433,7 @@ &usdhc2 {
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd1_reg>;
 	status = "disabled";
 };
 
@@ -442,5 +443,6 @@ &usdhc3 {
 		     &pinctrl_usdhc3_cdwp>;
 	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd0_reg>;
 	status = "disabled";
 };

arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h

@@ -124,7 +124,7 @@
 #define MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD                                     0x0A4 0x30C 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1                                      0x0A4 0x30C 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0                                 0x0A8 0x310 0x000 0x0 0x0
-#define MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x31  0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x310 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1                                 0x0AC 0x314 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3                                    0x0AC 0x314 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2                                 0x0B0 0x318 0x000 0x0 0x0

arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h

@@ -130,7 +130,7 @@
 #define MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                                     0x0A4 0x30C 0x000 0x0 0x0
 #define MX8MQ_IOMUXC_SD1_CMD_GPIO2_IO1                                      0x0A4 0x30C 0x000 0x5 0x0
 #define MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0                                 0x0A8 0x310 0x000 0x0 0x0
-#define MX8MQ_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x31  0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x310 0x000 0x5 0x0
 #define MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1                                 0x0AC 0x314 0x000 0x0 0x0
 #define MX8MQ_IOMUXC_SD1_DATA1_GPIO2_IO3                                    0x0AC 0x314 0x000 0x5 0x0
 #define MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2                                 0x0B0 0x318 0x000 0x0 0x0