ARM: dts: renesas: Group tuples in regulator-gpio states properties

To improve human readability and enable automatic validation, the tuples
in the "states" properties of device nodes compatible with
"regulator-gpio" should be grouped, as reported by "make dtbs_check":

    $ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
    arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi0: states:0: Additional items are not allowed (1800000, 0 were unexpected)
    arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi0: states:0: [3300000, 1, 1800000, 0] is too long
    arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi1: states:0: Additional items are not allowed (1800000, 0 were unexpected)
    arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi1: states:0: [3300000, 1, 1800000, 0] is too long
    arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi2: states:0: Additional items are not allowed (1800000, 0 were unexpected)
    arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi2: states:0: [3300000, 1, 1800000, 0] is too long
    ...

Fix this by grouping the tuples using angle brackets.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191213164115.3697-2-geert+renesas@glider.beReviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>

arch/arm/boot/dts/iwg20d-q7-common.dtsi

@@ -132,8 +132,7 @@ vccq_sdhi1: regulator-vccq-sdhi1 {
 
 		gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 };
 

arch/arm/boot/dts/r8a7740-armadillo800eva.dts

@@ -60,8 +60,7 @@ vccq_sdhi0: regulator-vccq-sdhi0 {
 
 		enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
 		gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
-		states = <3300000 0
-			  1800000 1>;
+		states = <3300000 0>, <1800000 1>;
 
 		enable-active-high;
 	};

arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts

@@ -76,8 +76,7 @@ vccq_sdhi0: regulator-vccq-sdhi0 {
 
 		gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 };
 

arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts

@@ -65,8 +65,7 @@ vccq_sdhi2: regulator-vccq-sdhi2 {
 
 		gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 };
 

arch/arm/boot/dts/r8a7779-marzen.dts

@@ -48,8 +48,7 @@ vccq_sdhi0: regulator-vccq-sdhi0 {
 
 		gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	ethernet@18000000 {

arch/arm/boot/dts/r8a7790-lager.dts

@@ -150,8 +150,7 @@ vccq_sdhi0: regulator-vccq-sdhi0 {
 
 		gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi2: regulator-vcc-sdhi2 {
@@ -174,8 +173,7 @@ vccq_sdhi2: regulator-vccq-sdhi2 {
 
 		gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	audio_clock: audio_clock {

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -193,8 +193,7 @@ vccq_sdhi0: regulator-vccq-sdhi0 {
 
 		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi1: regulator-vcc-sdhi1 {
@@ -217,8 +216,7 @@ vccq_sdhi1: regulator-vccq-sdhi1 {
 
 		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi2: regulator-vcc-sdhi2 {
@@ -241,8 +239,7 @@ vccq_sdhi2: regulator-vccq-sdhi2 {
 
 		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	audio_clock: audio_clock {

arch/arm/boot/dts/r8a7791-porter.dts

@@ -63,8 +63,7 @@ vccq_sdhi0: regulator-vccq-sdhi0 {
 
 		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi2: regulator-vcc-sdhi2 {
@@ -85,8 +84,7 @@ vccq_sdhi2: regulator-vccq-sdhi2 {
 
 		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	hdmi-out {

arch/arm/boot/dts/r8a7793-gose.dts

@@ -179,8 +179,7 @@ vccq_sdhi0: regulator-vccq-sdhi0 {
 
 		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi1: regulator-vcc-sdhi1 {
@@ -203,8 +202,7 @@ vccq_sdhi1: regulator-vccq-sdhi1 {
 
 		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi2: regulator-vcc-sdhi2 {
@@ -227,8 +225,7 @@ vccq_sdhi2: regulator-vccq-sdhi2 {
 
 		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	audio_clock: audio_clock {

arch/arm/boot/dts/r8a7794-alt.dts

@@ -60,8 +60,7 @@ vccq_sdhi0: regulator-vccq-sdhi0 {
 
 		gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi1: regulator-vcc-sdhi1 {
@@ -84,8 +83,7 @@ vccq_sdhi1: regulator-vccq-sdhi1 {
 
 		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	lbsc {

arch/arm/boot/dts/r8a7794-silk.dts

@@ -126,8 +126,7 @@ vccq_sdhi1: regulator-vccq-sdhi1 {
 
 		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vga-encoder {