Merge tag 'drm/panel/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux into drm-next

drm/panel: Changes for v3.19-rc1

This contains support for a couple of new panels, updates for some GPIO
API changes and a bunch of updates to the MIPI DSI support that should
make it easier to write panel drivers in the future.

* tag 'drm/panel/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux: (31 commits)
  drm/panel: Add Sharp LQ101R1SX01 support
  drm/dsi: Do not require .owner field to be set
  drm/dsi: Resolve MIPI DSI device from phandle
  drm/dsi: Implement DCS set_{column,page}_address commands
  drm/dsi: Implement DCS {get,set}_pixel_format commands
  drm/dsi: Implement DCS get_power_mode command
  drm/dsi: Implement DCS soft_reset command
  drm/dsi: Implement DCS nop command
  drm/dsi: Add to DocBook documentation
  drm/dsi: Implement some standard DCS commands
  drm/dsi: Implement generic read and write commands
  drm/panel: s6e8aa0: Use standard MIPI DSI function
  drm/dsi: Add mipi_dsi_set_maximum_return_packet_size() helper
  drm/dsi: Constify mipi_dsi_msg
  drm/dsi: Make mipi_dsi_dcs_{read,write}() symmetrical
  drm/dsi: Add DSI transfer helper
  drm/dsi: Add message to packet translator
  drm/dsi: Introduce packet format helpers
  drm/panel: s6e8aa0: Fix build warnings on 64-bit
  drm/panel: ld9040: Fix build warnings on 64-bit
  ...

Documentation/DocBook/drm.tmpl

@@ -2366,6 +2366,12 @@ void intel_crt_init(struct drm_device *dev)
 !Pdrivers/gpu/drm/drm_dp_mst_topology.c dp mst helper
 !Iinclude/drm/drm_dp_mst_helper.h
 !Edrivers/gpu/drm/drm_dp_mst_topology.c
+    </sect2>
+    <sect2>
+      <title>MIPI DSI Helper Functions Reference</title>
+!Pdrivers/gpu/drm/drm_mipi_dsi.c dsi helpers
+!Iinclude/drm/drm_mipi_dsi.h
+!Edrivers/gpu/drm/drm_mipi_dsi.c
     </sect2>
     <sect2>
       <title>EDID Helper Functions Reference</title>

Documentation/devicetree/bindings/panel/auo,b116xw03.txt

+AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel
+
+Required properties:
+- compatible: should be "auo,b116xw03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/panel/hannstar,hsd070pww1.txt

+HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "hannstar,hsd070pww1"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/panel/hit,tx23d38vm0caa.txt

+Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
+
+Required properties:
+- compatible: should be "hit,tx23d38vm0caa"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/panel/innolux,g121i1-l01.txt

+Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,g121i1-l01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/panel/sharp,lq101r1sx01.txt

+Sharp Microelectronics 10.1" WQXGA TFT LCD panel
+
+This panel requires a dual-channel DSI host to operate. It supports two modes:
+- left-right: each channel drives the left or right half of the screen
+- even-odd: each channel drives the even or odd lines of the screen
+
+Each of the DSI channels controls a separate DSI peripheral. The peripheral
+driven by the first link (DSI-LINK1), left or even, is considered the primary
+peripheral and controls the device. The 'link2' property contains a phandle
+to the peripheral driven by the second link (DSI-LINK2, right or odd).
+
+Note that in video mode the DSI-LINK1 interface always provides the left/even
+pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it
+is possible to program either link to drive the left/even or right/odd pixels
+but for the sake of consistency this binding assumes that the same assignment
+is chosen as for video mode.
+
+Required properties:
+- compatible: should be "sharp,lq101r1sx01"
+- reg: DSI virtual channel of the peripheral
+
+Required properties (for DSI-LINK1 only):
+- link2: phandle to the DSI peripheral on the secondary link. Note that the
+  presence of this property marks the containing node as DSI-LINK1.
+- power-supply: phandle of the regulator that provides the supply voltage
+
+Optional properties (for DSI-LINK1 only):
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+	dsi@54300000 {
+		panel: panel@0 {
+			compatible = "sharp,lq101r1sx01";
+			reg = <0>;
+
+			link2 = <&secondary>;
+
+			power-supply = <...>;
+			backlight = <...>;
+		};
+	};
+
+	dsi@54400000 {
+		secondary: panel@0 {
+			compatible = "sharp,lq101r1sx01";
+			reg = <0>;
+		};
+	};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -64,8 +64,10 @@ gmt	Global Mixed-mode Technology, Inc.
 google	Google, Inc.
 gumstix	Gumstix, Inc.
 gw	Gateworks Corporation
+hannstar	HannStar Display Corporation
 haoyu	Haoyu Microelectronic Co. Ltd.
 hisilicon	Hisilicon Limited.
+hit	Hitachi Ltd.
 honeywell	Honeywell
 hp	Hewlett Packard
 i2se	I2SE GmbH

drivers/gpu/drm/exynos/exynos_drm_dsi.c

@@ -1236,7 +1236,7 @@ static bool exynos_dsi_is_short_dsi_type(u8 type)
 }
 
 static ssize_t exynos_dsi_host_transfer(struct mipi_dsi_host *host,
-				       struct mipi_dsi_msg *msg)
+				        const struct mipi_dsi_msg *msg)
 {
 	struct exynos_dsi *dsi = host_to_dsi(host);
 	struct exynos_dsi_transfer xfer;

drivers/gpu/drm/panel/Kconfig

@@ -27,4 +27,17 @@ config DRM_PANEL_S6E8AA0
 	select DRM_MIPI_DSI
 	select VIDEOMODE_HELPERS
 
+config DRM_PANEL_SHARP_LQ101R1SX01
+	tristate "Sharp LQ101R1SX01 panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	help
+	  Say Y here if you want to enable support for Sharp LQ101R1SX01
+	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
+	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
+	  the host and has a built-in LED backlight.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called panel-sharp-lq101r1sx01.
+
 endmenu

drivers/gpu/drm/panel/Makefile

 obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
 obj-$(CONFIG_DRM_PANEL_LD9040) += panel-ld9040.o
 obj-$(CONFIG_DRM_PANEL_S6E8AA0) += panel-s6e8aa0.o
+obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o

drivers/gpu/drm/panel/panel-ld9040.c

@@ -145,7 +145,7 @@ static void ld9040_dcs_write(struct ld9040 *ctx, const u8 *data, size_t len)
 	if (ctx->error < 0 || len == 0)
 		return;
 
-	dev_dbg(ctx->dev, "writing dcs seq: %*ph\n", len, data);
+	dev_dbg(ctx->dev, "writing dcs seq: %*ph\n", (int)len, data);
 	ret = ld9040_spi_write_word(ctx, *data);
 
 	while (!ret && --len) {
@@ -154,8 +154,8 @@ static void ld9040_dcs_write(struct ld9040 *ctx, const u8 *data, size_t len)
 	}
 
 	if (ret) {
-		dev_err(ctx->dev, "error %d writing dcs seq: %*ph\n", ret, len,
-			data);
+		dev_err(ctx->dev, "error %d writing dcs seq: %*ph\n", ret,
+			(int)len, data);
 		ctx->error = ret;
 	}
 
@@ -336,17 +336,12 @@ static int ld9040_probe(struct spi_device *spi)
 	if (ret < 0)
 		return ret;
 
-	ctx->reset_gpio = devm_gpiod_get(dev, "reset");
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(ctx->reset_gpio)) {
 		dev_err(dev, "cannot get reset-gpios %ld\n",
 			PTR_ERR(ctx->reset_gpio));
 		return PTR_ERR(ctx->reset_gpio);
 	}
-	ret = gpiod_direction_output(ctx->reset_gpio, 1);
-	if (ret < 0) {
-		dev_err(dev, "cannot configure reset-gpios %d\n", ret);
-		return ret;
-	}
 
 	spi->bits_per_word = 9;
 	ret = spi_setup(spi);

drivers/gpu/drm/panel/panel-s6e8aa0.c

@@ -141,10 +141,10 @@ static void s6e8aa0_dcs_write(struct s6e8aa0 *ctx, const void *data, size_t len)
 	if (ctx->error < 0)
 		return;
 
-	ret = mipi_dsi_dcs_write(dsi, data, len);
+	ret = mipi_dsi_dcs_write_buffer(dsi, data, len);
 	if (ret < 0) {
-		dev_err(ctx->dev, "error %zd writing dcs seq: %*ph\n", ret, len,
-			data);
+		dev_err(ctx->dev, "error %zd writing dcs seq: %*ph\n", ret,
+			(int)len, data);
 		ctx->error = ret;
 	}
 }
@@ -800,27 +800,15 @@ static void s6e8aa0_panel_init(struct s6e8aa0 *ctx)
 }
 
 static void s6e8aa0_set_maximum_return_packet_size(struct s6e8aa0 *ctx,
-						   int size)
+						   u16 size)
 {
 	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
-	const struct mipi_dsi_host_ops *ops = dsi->host->ops;
-	u8 buf[] = {size, 0};
-	struct mipi_dsi_msg msg = {
-		.channel = dsi->channel,
-		.type = MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE,
-		.tx_len = sizeof(buf),
-		.tx_buf = buf
-	};
 	int ret;
 
 	if (ctx->error < 0)
 		return;
 
-	if (!ops || !ops->transfer)
-		ret = -EIO;
-	else
-		ret = ops->transfer(dsi->host, &msg);
-
+	ret = mipi_dsi_set_maximum_return_packet_size(dsi, size);
 	if (ret < 0) {
 		dev_err(ctx->dev,
 			"error %d setting maximum return packet size to %d\n",
@@ -1019,17 +1007,12 @@ static int s6e8aa0_probe(struct mipi_dsi_device *dsi)
 		return ret;
 	}
 
-	ctx->reset_gpio = devm_gpiod_get(dev, "reset");
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(ctx->reset_gpio)) {
 		dev_err(dev, "cannot get reset-gpios %ld\n",
 			PTR_ERR(ctx->reset_gpio));
 		return PTR_ERR(ctx->reset_gpio);
 	}
-	ret = gpiod_direction_output(ctx->reset_gpio, 1);
-	if (ret < 0) {
-		dev_err(dev, "cannot configure reset-gpios %d\n", ret);
-		return ret;
-	}
 
 	ctx->brightness = GAMMA_LEVEL_NUM - 1;
 
@@ -1069,7 +1052,6 @@ static struct mipi_dsi_driver s6e8aa0_driver = {
 	.remove = s6e8aa0_remove,
 	.driver = {
 		.name = "panel_s6e8aa0",
-		.owner = THIS_MODULE,
 		.of_match_table = s6e8aa0_of_match,
 	},
 };

drivers/gpu/drm/panel/panel-simple.c

@@ -247,21 +247,14 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
 	if (IS_ERR(panel->supply))
 		return PTR_ERR(panel->supply);
 
-	panel->enable_gpio = devm_gpiod_get_optional(dev, "enable");
+	panel->enable_gpio = devm_gpiod_get_optional(dev, "enable",
+						     GPIOD_OUT_LOW);
 	if (IS_ERR(panel->enable_gpio)) {
 		err = PTR_ERR(panel->enable_gpio);
 		dev_err(dev, "failed to request GPIO: %d\n", err);
 		return err;
 	}
 
-	if (panel->enable_gpio) {
-		err = gpiod_direction_output(panel->enable_gpio, 0);
-		if (err < 0) {
-			dev_err(dev, "failed to setup GPIO: %d\n", err);
-			return err;
-		}
-	}
-
 	backlight = of_parse_phandle(dev->of_node, "backlight", 0);
 	if (backlight) {
 		panel->backlight = of_find_backlight_by_node(backlight);
@@ -376,6 +369,29 @@ static const struct panel_desc auo_b101xtn01 = {
 	},
 };
 
+static const struct drm_display_mode auo_b116xw03_mode = {
+	.clock = 70589,
+	.hdisplay = 1366,
+	.hsync_start = 1366 + 40,
+	.hsync_end = 1366 + 40 + 40,
+	.htotal = 1366 + 40 + 40 + 32,
+	.vdisplay = 768,
+	.vsync_start = 768 + 10,
+	.vsync_end = 768 + 10 + 12,
+	.vtotal = 768 + 10 + 12 + 6,
+	.vrefresh = 60,
+};
+
+static const struct panel_desc auo_b116xw03 = {
+	.modes = &auo_b116xw03_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 256,
+		.height = 144,
+	},
+};
+
 static const struct drm_display_mode auo_b133xtn01_mode = {
 	.clock = 69500,
 	.hdisplay = 1366,
@@ -415,6 +431,7 @@ static const struct drm_display_mode auo_b133htn01_mode = {
 static const struct panel_desc auo_b133htn01 = {
 	.modes = &auo_b133htn01_mode,
 	.num_modes = 1,
+	.bpc = 6,
 	.size = {
 		.width = 293,
 		.height = 165,
@@ -536,22 +553,92 @@ static const struct drm_display_mode foxlink_fl500wvr00_a0t_mode = {
 static const struct panel_desc foxlink_fl500wvr00_a0t = {
 	.modes = &foxlink_fl500wvr00_a0t_mode,
 	.num_modes = 1,
+	.bpc = 8,
 	.size = {
 		.width = 108,
 		.height = 65,
 	},
 };
 
-static const struct drm_display_mode innolux_n116bge_mode = {
+static const struct drm_display_mode hannstar_hsd070pww1_mode = {
+	.clock = 71100,
+	.hdisplay = 1280,
+	.hsync_start = 1280 + 1,
+	.hsync_end = 1280 + 1 + 158,
+	.htotal = 1280 + 1 + 158 + 1,
+	.vdisplay = 800,
+	.vsync_start = 800 + 1,
+	.vsync_end = 800 + 1 + 21,
+	.vtotal = 800 + 1 + 21 + 1,
+	.vrefresh = 60,
+};
+
+static const struct panel_desc hannstar_hsd070pww1 = {
+	.modes = &hannstar_hsd070pww1_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 151,
+		.height = 94,
+	},
+};
+
+static const struct drm_display_mode hitachi_tx23d38vm0caa_mode = {
+	.clock = 33333,
+	.hdisplay = 800,
+	.hsync_start = 800 + 85,
+	.hsync_end = 800 + 85 + 86,
+	.htotal = 800 + 85 + 86 + 85,
+	.vdisplay = 480,
+	.vsync_start = 480 + 16,
+	.vsync_end = 480 + 16 + 13,
+	.vtotal = 480 + 16 + 13 + 16,
+	.vrefresh = 60,
+};
+
+static const struct panel_desc hitachi_tx23d38vm0caa = {
+	.modes = &hitachi_tx23d38vm0caa_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 195,
+		.height = 117,
+	},
+};
+
+static const struct drm_display_mode innolux_g121i1_l01_mode = {
 	.clock = 71000,
+	.hdisplay = 1280,
+	.hsync_start = 1280 + 64,
+	.hsync_end = 1280 + 64 + 32,
+	.htotal = 1280 + 64 + 32 + 64,
+	.vdisplay = 800,
+	.vsync_start = 800 + 9,
+	.vsync_end = 800 + 9 + 6,
+	.vtotal = 800 + 9 + 6 + 9,
+	.vrefresh = 60,
+};
+
+static const struct panel_desc innolux_g121i1_l01 = {
+	.modes = &innolux_g121i1_l01_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 261,
+		.height = 163,
+	},
+};
+
+static const struct drm_display_mode innolux_n116bge_mode = {
+	.clock = 76420,
 	.hdisplay = 1366,
-	.hsync_start = 1366 + 64,
-	.hsync_end = 1366 + 64 + 6,
-	.htotal = 1366 + 64 + 6 + 64,
+	.hsync_start = 1366 + 136,
+	.hsync_end = 1366 + 136 + 30,
+	.htotal = 1366 + 136 + 30 + 60,
 	.vdisplay = 768,
 	.vsync_start = 768 + 8,
-	.vsync_end = 768 + 8 + 4,
-	.vtotal = 768 + 8 + 4 + 8,
+	.vsync_end = 768 + 8 + 12,
+	.vtotal = 768 + 8 + 12 + 12,
 	.vrefresh = 60,
 	.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
 };
@@ -642,6 +729,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "auo,b101xtn01",
 		.data = &auo_b101xtn01,
+	}, {
+		.compatible = "auo,b116xw03",
+		.data = &auo_b116xw03,
 	}, {
 		.compatible = "auo,b133htn01",
 		.data = &auo_b133htn01,
@@ -666,6 +756,15 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "foxlink,fl500wvr00-a0t",
 		.data = &foxlink_fl500wvr00_a0t,
+	}, {
+		.compatible = "hannstar,hsd070pww1",
+		.data = &hannstar_hsd070pww1,
+	}, {
+		.compatible = "hit,tx23d38vm0caa",
+		.data = &hitachi_tx23d38vm0caa
+	}, {
+		.compatible ="innolux,g121i1-l01",
+		.data = &innolux_g121i1_l01
 	}, {
 		.compatible = "innolux,n116bge",
 		.data = &innolux_n116bge,
@@ -741,6 +840,7 @@ static const struct panel_desc_dsi lg_ld070wx3_sl01 = {
 	.desc = {
 		.modes = &lg_ld070wx3_sl01_mode,
 		.num_modes = 1,
+		.bpc = 8,
 		.size = {
 			.width = 94,
 			.height = 151,
@@ -768,6 +868,7 @@ static const struct panel_desc_dsi lg_lh500wx1_sd03 = {
 	.desc = {
 		.modes = &lg_lh500wx1_sd03_mode,
 		.num_modes = 1,
+		.bpc = 8,
 		.size = {
 			.width = 62,
 			.height = 110,
@@ -795,6 +896,7 @@ static const struct panel_desc_dsi panasonic_vvx10f004b00 = {
 	.desc = {
 		.modes = &panasonic_vvx10f004b00_mode,
 		.num_modes = 1,
+		.bpc = 8,
 		.size = {
 			.width = 217,
 			.height = 136,
@@ -864,7 +966,6 @@ static void panel_simple_dsi_shutdown(struct mipi_dsi_device *dsi)
 static struct mipi_dsi_driver panel_simple_dsi_driver = {
 	.driver = {
 		.name = "panel-simple-dsi",
-		.owner = THIS_MODULE,
 		.of_match_table = dsi_of_match,
 	},
 	.probe = panel_simple_dsi_probe,

include/drm/drm_mipi_dsi.h

@@ -26,6 +26,7 @@ struct mipi_dsi_device;
  * struct mipi_dsi_msg - read/write DSI buffer
  * @channel: virtual channel id
  * @type: payload data type
+ * @flags: flags controlling this message transmission
  * @tx_len: length of @tx_buf
  * @tx_buf: data to be written
  * @rx_len: length of @rx_buf
@@ -43,12 +44,44 @@ struct mipi_dsi_msg {
 	void *rx_buf;
 };
 
+bool mipi_dsi_packet_format_is_short(u8 type);
+bool mipi_dsi_packet_format_is_long(u8 type);
+
+/**
+ * struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format
+ * @size: size (in bytes) of the packet
+ * @header: the four bytes that make up the header (Data ID, Word Count or
+ *     Packet Data, and ECC)
+ * @payload_length: number of bytes in the payload
+ * @payload: a pointer to a buffer containing the payload, if any
+ */
+struct mipi_dsi_packet {
+	size_t size;
+	u8 header[4];
+	size_t payload_length;
+	const u8 *payload;
+};
+
+int mipi_dsi_create_packet(struct mipi_dsi_packet *packet,
+			   const struct mipi_dsi_msg *msg);
+
 /**
  * struct mipi_dsi_host_ops - DSI bus operations
  * @attach: attach DSI device to DSI host
  * @detach: detach DSI device from DSI host
- * @transfer: send and/or receive DSI packet, return number of received bytes,
- * 	      or error
+ * @transfer: transmit a DSI packet
+ *
+ * DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg
+ * structures. This structure contains information about the type of packet
+ * being transmitted as well as the transmit and receive buffers. When an
+ * error is encountered during transmission, this function will return a
+ * negative error code. On success it shall return the number of bytes
+ * transmitted for write packets or the number of bytes received for read
+ * packets.
+ *
+ * Note that typically DSI packet transmission is atomic, so the .transfer()
+ * function will seldomly return anything other than the number of bytes
+ * contained in the transmit buffer on success.
  */
 struct mipi_dsi_host_ops {
 	int (*attach)(struct mipi_dsi_host *host,
@@ -56,7 +89,7 @@ struct mipi_dsi_host_ops {
 	int (*detach)(struct mipi_dsi_host *host,
 		      struct mipi_dsi_device *dsi);
 	ssize_t (*transfer)(struct mipi_dsi_host *host,
-			    struct mipi_dsi_msg *msg);
+			    const struct mipi_dsi_msg *msg);
 };
 
 /**
@@ -130,12 +163,57 @@ static inline struct mipi_dsi_device *to_mipi_dsi_device(struct device *dev)
 	return container_of(dev, struct mipi_dsi_device, dev);
 }
 
+struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np);
 int mipi_dsi_attach(struct mipi_dsi_device *dsi);
 int mipi_dsi_detach(struct mipi_dsi_device *dsi);
-ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, const void *data,
-			    size_t len);
+int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
+					    u16 value);
+
+ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload,
+			       size_t size);
+ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params,
+			      size_t num_params, void *data, size_t size);
+
+/**
+ * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode
+ * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking
+ *    information only
+ * @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both
+ *    V-Blanking and H-Blanking information
+ */
+enum mipi_dsi_dcs_tear_mode {
+	MIPI_DSI_DCS_TEAR_MODE_VBLANK,
+	MIPI_DSI_DCS_TEAR_MODE_VHBLANK,
+};
+
+#define MIPI_DSI_DCS_POWER_MODE_DISPLAY (1 << 2)
+#define MIPI_DSI_DCS_POWER_MODE_NORMAL  (1 << 3)
+#define MIPI_DSI_DCS_POWER_MODE_SLEEP   (1 << 4)
+#define MIPI_DSI_DCS_POWER_MODE_PARTIAL (1 << 5)
+#define MIPI_DSI_DCS_POWER_MODE_IDLE    (1 << 6)
+
+ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
+				  const void *data, size_t len);
+ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
+			   const void *data, size_t len);
 ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
 			  size_t len);
+int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode);
+int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format);
+int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
+				    u16 end);
+int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
+				  u16 end);
+int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
+			     enum mipi_dsi_dcs_tear_mode mode);
+int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format);
 
 /**
  * struct mipi_dsi_driver - DSI driver
@@ -167,9 +245,13 @@ static inline void mipi_dsi_set_drvdata(struct mipi_dsi_device *dsi, void *data)
 	dev_set_drvdata(&dsi->dev, data);
 }
 
-int mipi_dsi_driver_register(struct mipi_dsi_driver *driver);
+int mipi_dsi_driver_register_full(struct mipi_dsi_driver *driver,
+				  struct module *owner);
 void mipi_dsi_driver_unregister(struct mipi_dsi_driver *driver);
 
+#define mipi_dsi_driver_register(driver) \
+	mipi_dsi_driver_register_full(driver, THIS_MODULE)
+
 #define module_mipi_dsi_driver(__mipi_dsi_driver) \
 	module_driver(__mipi_dsi_driver, mipi_dsi_driver_register, \
 			mipi_dsi_driver_unregister)