mmc: sdhci-sprd: Fix eMMC init failure after hw reset

Some eMMC devices that do not close the auto clk gate after hw reset will
cause eMMC initialization to fail. Let's fix this.
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Fixes: ff874dbc ("mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K")
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231204064934.21236-1-wenchao.chen@unisoc.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/sdhci-sprd.c

@@ -239,15 +239,19 @@ static inline void _sdhci_sprd_set_clock(struct sdhci_host *host,
 	div = ((div & 0x300) >> 2) | ((div & 0xFF) << 8);
 	sdhci_enable_clk(host, div);
 
+	val = sdhci_readl(host, SDHCI_SPRD_REG_32_BUSY_POSI);
+	mask = SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN | SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN;
 	/* Enable CLK_AUTO when the clock is greater than 400K. */
 	if (clk > 400000) {
-		val = sdhci_readl(host, SDHCI_SPRD_REG_32_BUSY_POSI);
-		mask = SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN |
-			SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN;
 		if (mask != (val & mask)) {
 			val |= mask;
 			sdhci_writel(host, val, SDHCI_SPRD_REG_32_BUSY_POSI);
 		}
+	} else {
+		if (val & mask) {
+			val &= ~mask;
+			sdhci_writel(host, val, SDHCI_SPRD_REG_32_BUSY_POSI);
+		}
 	}
 }