arm64: dts: qcom: msm8998: switch PCIe QMP PHY to new style of bindings

Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230820142035.89903-11-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

arch/arm64/boot/dts/qcom/msm8998.dtsi

@@ -946,7 +946,7 @@ pcie0: pci@1c00000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 			num-lanes = <1>;
-			phys = <&pciephy>;
+			phys = <&pcie_phy>;
 			phy-names = "pciephy";
 			status = "disabled";
 
@@ -976,32 +976,28 @@ pcie0: pci@1c00000 {
 
 		pcie_phy: phy@1c06000 {
 			compatible = "qcom,msm8998-qmp-pcie-phy";
-			reg = <0x01c06000 0x18c>;
-			#address-cells = <1>;
-			#size-cells = <1>;
+			reg = <0x01c06000 0x1000>;
 			status = "disabled";
-			ranges;
 
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
-				 <&gcc GCC_PCIE_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_PCIE_CLKREF_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "pipe";
+
+			clock-output-names = "pcie_0_pipe_clk_src";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>;
 			reset-names = "phy", "common";
 
 			vdda-phy-supply = <&vreg_l1a_0p875>;
 			vdda-pll-supply = <&vreg_l2a_1p2>;
-
-			pciephy: phy@1c06800 {
-				reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>;
-				#phy-cells = <0>;
-
-				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "pcie_0_pipe_clk_src";
-				#clock-cells = <0>;
-			};
 		};
 
 		ufshc: ufshc@1da4000 {