Commit 8b8a7df9 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "A new driver for slidebar on Ideapad laptops and a bunch of assorted
  driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (32 commits)
  Input: add SYN_MAX and SYN_CNT constants
  Input: max11801_ts - convert to devm
  Input: egalax-ts - fix typo and improve text
  Input: MAINTAINERS - change maintainer for cyttsp driver
  Input: cyttsp4 - kill 'defined but not used' compiler warnings
  Input: add driver for slidebar on Lenovo IdeaPad laptops
  Input: omap-keypad - set up irq type from DT
  Input: omap-keypad - enable wakeup capability for keypad.
  Input: omap-keypad - clear interrupts on open
  Input: omap-keypad - convert to threaded IRQ
  Input: omap-keypad - use bitfiled instead of hardcoded values
  Input: cyttsp4 - remove useless NULL test from cyttsp4_watchdog_timer()
  Input: wacom - fix error return code in wacom_probe()
  Input: as5011 - fix error return code in as5011_probe()
  Input: keyboard, serio - simplify use of devm_ioremap_resource
  Input: tegra-kbc - simplify use of devm_ioremap_resource
  Input: htcpen - fix incorrect placement of __initdata
  Input: qt1070 - add power management ops
  Input: wistron_btns - add MODULE_DEVICE_TABLE
  Input: wistron_btns - mark the Medion MD96500 keymap as tested
  ...
parents b04c99e3 07176b98
Input: sysrq reset sequence
A simple binding to represent a set of keys as described in
include/uapi/linux/input.h. This is to communicate a sequence of keys to the
sysrq driver. Upon holding the keys for a specified amount of time (if
specified) the system is sync'ed and reset.
Key sequences are global to the system but all the keys in a set must be coming
from the same input device.
The /chosen node should contain a 'linux,sysrq-reset-seq' child node to define
a set of keys.
Required property:
sysrq-reset-seq: array of Linux keycodes, one keycode per cell.
Optional property:
timeout-ms: duration keys must be pressed together in milliseconds before
generating a sysrq. If omitted the system is rebooted immediately when a valid
sequence has been recognized.
Example:
chosen {
linux,sysrq-reset-seq {
keyset = <0x03
0x04
0x0a>;
timeout-ms = <3000>;
};
};
Would represent KEY_2, KEY_3 and KEY_9.
......@@ -6,7 +6,7 @@ Required properties:
- interrupt-parent: the phandle for the interrupt controller
- interrupts: touch controller interrupt
- wakeup-gpios: the gpio pin to be used for waking up the controller
as well as uased as irq pin
and also used as irq pin
Example:
......
......@@ -2494,9 +2494,9 @@ S: Maintained
F: drivers/media/common/cypress_firmware*
CYTTSP TOUCHSCREEN DRIVER
M: Javier Martinez Canillas <javier@dowhile0.org>
M: Ferruh Yigit <fery@cypress.com>
L: linux-input@vger.kernel.org
S: Maintained
S: Supported
F: drivers/input/touchscreen/cyttsp*
F: include/linux/input/cyttsp.h
......@@ -4141,6 +4141,13 @@ W: http://launchpad.net/ideapad-laptop
S: Maintained
F: drivers/platform/x86/ideapad-laptop.c
IDEAPAD LAPTOP SLIDEBAR DRIVER
M: Andrey Moiseev <o2g.org.ru@gmail.com>
L: linux-input@vger.kernel.org
W: https://github.com/o2genum/ideapad-slidebar
S: Maintained
F: drivers/input/misc/ideapad_slidebar.c
IDE/ATAPI DRIVERS
M: Borislav Petkov <bp@alien8.de>
L: linux-ide@vger.kernel.org
......
......@@ -234,7 +234,7 @@ static int as5011_probe(struct i2c_client *client,
int irq;
int error;
plat_data = client->dev.platform_data;
plat_data = dev_get_platdata(&client->dev);
if (!plat_data)
return -EINVAL;
......@@ -288,6 +288,7 @@ static int as5011_probe(struct i2c_client *client,
if (irq < 0) {
dev_err(&client->dev,
"Failed to get irq number for button gpio\n");
error = irq;
goto err_free_button_gpio;
}
......
......@@ -61,7 +61,7 @@ static void dc_pad_callback(struct mapleq *mq)
static int dc_pad_open(struct input_dev *dev)
{
struct dc_pad *pad = dev->dev.platform_data;
struct dc_pad *pad = dev_get_platdata(&dev->dev);
maple_getcond_callback(pad->mdev, dc_pad_callback, HZ/20,
MAPLE_FUNC_CONTROLLER);
......@@ -71,7 +71,7 @@ static int dc_pad_open(struct input_dev *dev)
static void dc_pad_close(struct input_dev *dev)
{
struct dc_pad *pad = dev->dev.platform_data;
struct dc_pad *pad = dev_get_platdata(&dev->dev);
maple_getcond_callback(pad->mdev, dc_pad_callback, 0,
MAPLE_FUNC_CONTROLLER);
......
......@@ -442,12 +442,6 @@ static int imx_keypad_probe(struct platform_device *pdev)
return -EINVAL;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(&pdev->dev, "no I/O memory defined in platform data\n");
return -EINVAL;
}
input_dev = devm_input_allocate_device(&pdev->dev);
if (!input_dev) {
dev_err(&pdev->dev, "failed to allocate the input device\n");
......@@ -468,6 +462,7 @@ static int imx_keypad_probe(struct platform_device *pdev)
setup_timer(&keypad->check_matrix_timer,
imx_keypad_check_for_events, (unsigned long) keypad);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
keypad->mmio_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(keypad->mmio_base))
return PTR_ERR(keypad->mmio_base);
......
......@@ -271,7 +271,7 @@ static int max7359_remove(struct i2c_client *client)
return 0;
}
#ifdef CONFIG_PM
#ifdef CONFIG_PM_SLEEP
static int max7359_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
......
......@@ -171,12 +171,6 @@ static int nspire_keypad_probe(struct platform_device *pdev)
return -EINVAL;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "missing platform resources\n");
return -EINVAL;
}
keypad = devm_kzalloc(&pdev->dev, sizeof(struct nspire_keypad),
GFP_KERNEL);
if (!keypad) {
......@@ -208,6 +202,7 @@ static int nspire_keypad_probe(struct platform_device *pdev)
return PTR_ERR(keypad->clk);
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
keypad->reg_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(keypad->reg_base))
return PTR_ERR(keypad->reg_base);
......
......@@ -53,21 +53,17 @@
#define OMAP4_KBD_FULLCODE63_32 0x48
/* OMAP4 bit definitions */
#define OMAP4_DEF_IRQENABLE_EVENTEN (1 << 0)
#define OMAP4_DEF_IRQENABLE_LONGKEY (1 << 1)
#define OMAP4_DEF_IRQENABLE_TIMEOUTEN (1 << 2)
#define OMAP4_DEF_WUP_EVENT_ENA (1 << 0)
#define OMAP4_DEF_WUP_LONG_KEY_ENA (1 << 1)
#define OMAP4_DEF_CTRL_NOSOFTMODE (1 << 1)
#define OMAP4_DEF_CTRLPTVVALUE (1 << 2)
#define OMAP4_DEF_CTRLPTV (1 << 1)
#define OMAP4_DEF_IRQENABLE_EVENTEN BIT(0)
#define OMAP4_DEF_IRQENABLE_LONGKEY BIT(1)
#define OMAP4_DEF_WUP_EVENT_ENA BIT(0)
#define OMAP4_DEF_WUP_LONG_KEY_ENA BIT(1)
#define OMAP4_DEF_CTRL_NOSOFTMODE BIT(1)
#define OMAP4_DEF_CTRL_PTV_SHIFT 2
/* OMAP4 values */
#define OMAP4_VAL_IRQDISABLE 0x00
#define OMAP4_VAL_DEBOUNCINGTIME 0x07
#define OMAP4_VAL_FUNCTIONALCFG 0x1E
#define OMAP4_MASK_IRQSTATUSDISABLE 0xFFFF
#define OMAP4_VAL_IRQDISABLE 0x0
#define OMAP4_VAL_DEBOUNCINGTIME 0x7
#define OMAP4_VAL_PVT 0x7
enum {
KBD_REVISION_OMAP4 = 0,
......@@ -78,6 +74,7 @@ struct omap4_keypad {
struct input_dev *input;
void __iomem *base;
bool irq_wake_enabled;
unsigned int irq;
unsigned int rows;
......@@ -116,8 +113,22 @@ static void kbd_write_irqreg(struct omap4_keypad *keypad_data,
}
/* Interrupt handler */
static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
/* Interrupt handlers */
static irqreturn_t omap4_keypad_irq_handler(int irq, void *dev_id)
{
struct omap4_keypad *keypad_data = dev_id;
if (kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)) {
/* Disable interrupts */
kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
OMAP4_VAL_IRQDISABLE);
return IRQ_WAKE_THREAD;
}
return IRQ_NONE;
}
static irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id)
{
struct omap4_keypad *keypad_data = dev_id;
struct input_dev *input_dev = keypad_data->input;
......@@ -125,10 +136,6 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
unsigned int col, row, code, changed;
u32 *new_state = (u32 *) key_state;
/* Disable interrupts */
kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
OMAP4_VAL_IRQDISABLE);
*new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
*(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
......@@ -175,11 +182,13 @@ static int omap4_keypad_open(struct input_dev *input)
disable_irq(keypad_data->irq);
kbd_writel(keypad_data, OMAP4_KBD_CTRL,
OMAP4_VAL_FUNCTIONALCFG);
OMAP4_DEF_CTRL_NOSOFTMODE |
(OMAP4_VAL_PVT << OMAP4_DEF_CTRL_PTV_SHIFT));
kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
OMAP4_VAL_DEBOUNCINGTIME);
/* clear pending interrupts */
kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
OMAP4_VAL_IRQDISABLE);
kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
OMAP4_DEF_IRQENABLE_EVENTEN |
OMAP4_DEF_IRQENABLE_LONGKEY);
......@@ -363,14 +372,15 @@ static int omap4_keypad_probe(struct platform_device *pdev)
goto err_free_keymap;
}
error = request_irq(keypad_data->irq, omap4_keypad_interrupt,
IRQF_TRIGGER_RISING,
"omap4-keypad", keypad_data);
error = request_threaded_irq(keypad_data->irq, omap4_keypad_irq_handler,
omap4_keypad_irq_thread_fn, 0,
"omap4-keypad", keypad_data);
if (error) {
dev_err(&pdev->dev, "failed to register interrupt\n");
goto err_free_input;
}
device_init_wakeup(&pdev->dev, true);
pm_runtime_put_sync(&pdev->dev);
error = input_register_device(keypad_data->input);
......@@ -384,6 +394,7 @@ static int omap4_keypad_probe(struct platform_device *pdev)
err_pm_disable:
pm_runtime_disable(&pdev->dev);
device_init_wakeup(&pdev->dev, false);
free_irq(keypad_data->irq, keypad_data);
err_free_keymap:
kfree(keypad_data->keymap);
......@@ -409,6 +420,8 @@ static int omap4_keypad_remove(struct platform_device *pdev)
pm_runtime_disable(&pdev->dev);
device_init_wakeup(&pdev->dev, false);
input_unregister_device(keypad_data->input);
iounmap(keypad_data->base);
......@@ -430,12 +443,46 @@ static const struct of_device_id omap_keypad_dt_match[] = {
MODULE_DEVICE_TABLE(of, omap_keypad_dt_match);
#endif
#ifdef CONFIG_PM_SLEEP
static int omap4_keypad_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct omap4_keypad *keypad_data = platform_get_drvdata(pdev);
int error;
if (device_may_wakeup(&pdev->dev)) {
error = enable_irq_wake(keypad_data->irq);
if (!error)
keypad_data->irq_wake_enabled = true;
}
return 0;
}
static int omap4_keypad_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct omap4_keypad *keypad_data = platform_get_drvdata(pdev);
if (device_may_wakeup(&pdev->dev) && keypad_data->irq_wake_enabled) {
disable_irq_wake(keypad_data->irq);
keypad_data->irq_wake_enabled = false;
}
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(omap4_keypad_pm_ops,
omap4_keypad_suspend, omap4_keypad_resume);
static struct platform_driver omap4_keypad_driver = {
.probe = omap4_keypad_probe,
.remove = omap4_keypad_remove,
.driver = {
.name = "omap4-keypad",
.owner = THIS_MODULE,
.pm = &omap4_keypad_pm_ops,
.of_match_table = of_match_ptr(omap_keypad_dt_match),
},
};
......
......@@ -243,6 +243,32 @@ static int qt1070_remove(struct i2c_client *client)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int qt1070_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct qt1070_data *data = i2c_get_clientdata(client);
if (device_may_wakeup(dev))
enable_irq_wake(data->irq);
return 0;
}
static int qt1070_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct qt1070_data *data = i2c_get_clientdata(client);
if (device_may_wakeup(dev))
disable_irq_wake(data->irq);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(qt1070_pm_ops, qt1070_suspend, qt1070_resume);
static const struct i2c_device_id qt1070_id[] = {
{ "qt1070", 0 },
{ },
......@@ -253,6 +279,7 @@ static struct i2c_driver qt1070_driver = {
.driver = {
.name = "qt1070",
.owner = THIS_MODULE,
.pm = &qt1070_pm_ops,
},
.id_table = qt1070_id,
.probe = qt1070_probe,
......
......@@ -191,12 +191,6 @@ static int spear_kbd_probe(struct platform_device *pdev)
int irq;
int error;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "no keyboard resource defined\n");
return -EBUSY;
}
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "not able to get irq for the device\n");
......@@ -228,6 +222,7 @@ static int spear_kbd_probe(struct platform_device *pdev)
kbd->suspended_rate = pdata->suspended_rate;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
kbd->io_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(kbd->io_base))
return PTR_ERR(kbd->io_base);
......
......@@ -638,12 +638,6 @@ static int tegra_kbc_probe(struct platform_device *pdev)
if (!tegra_kbc_check_pin_cfg(kbc, &num_rows))
return -EINVAL;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "failed to get I/O memory\n");
return -ENXIO;
}
kbc->irq = platform_get_irq(pdev, 0);
if (kbc->irq < 0) {
dev_err(&pdev->dev, "failed to get keyboard IRQ\n");
......@@ -658,6 +652,7 @@ static int tegra_kbc_probe(struct platform_device *pdev)
setup_timer(&kbc->timer, tegra_kbc_keypress_timer, (unsigned long)kbc);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
kbc->mmio = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(kbc->mmio))
return PTR_ERR(kbc->mmio);
......
......@@ -647,4 +647,14 @@ config INPUT_SIRFSOC_ONKEY
If unsure, say N.
config INPUT_IDEAPAD_SLIDEBAR
tristate "IdeaPad Laptop Slidebar"
depends on INPUT
depends on SERIO_I8042
help
Say Y here if you have an IdeaPad laptop with a slidebar.
To compile this driver as a module, choose M here: the
module will be called ideapad_slidebar.
endif
......@@ -61,3 +61,4 @@ obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o
obj-$(CONFIG_INPUT_YEALINK) += yealink.o
obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR) += ideapad_slidebar.o
/*
* Input driver for slidebars on some Lenovo IdeaPad laptops
*
* Copyright (C) 2013 Andrey Moiseev <o2g.org.ru@gmail.com>
*
* Reverse-engineered from Lenovo SlideNav software (SBarHook.dll).
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* Trademarks are the property of their respective owners.
*/
/*
* Currently tested and works on:
* Lenovo IdeaPad Y550
* Lenovo IdeaPad Y550P
*
* Other models can be added easily. To test,
* load with 'force' parameter set 'true'.
*
* LEDs blinking and input mode are managed via sysfs,
* (hex, unsigned byte value):
* /sys/devices/platform/ideapad_slidebar/slidebar_mode
*
* The value is in byte range, however, I only figured out
* how bits 0b10011001 work. Some other bits, probably,
* are meaningfull too.
*
* Possible states:
*
* STD_INT, ONMOV_INT, OFF_INT, LAST_POLL, OFF_POLL
*
* Meaning:
* released touched
* STD 'heartbeat' lights follow the finger
* ONMOV no lights lights follow the finger
* LAST at last pos lights follow the finger
* OFF no lights no lights
*
* INT all input events are generated, interrupts are used
* POLL no input events by default, to get them,
* send 0b10000000 (read below)
*
* Commands: write
*
* All | 0b01001 -> STD_INT
* possible | 0b10001 -> ONMOV_INT
* states | 0b01000 -> OFF_INT
*
* | 0b0 -> LAST_POLL
* STD_INT or ONMOV_INT |
* | 0b1 -> STD_INT
*
* | 0b0 -> OFF_POLL
* OFF_INT or OFF_POLL |
* | 0b1 -> OFF_INT
*
* Any state | 0b10000000 -> if the slidebar has updated data,
* produce one input event (last position),
* switch to respective POLL mode
* (like 0x0), if not in POLL mode yet.
*
* Get current state: read
*
* masked by 0x11 read value means:
*
* 0x00 LAST
* 0x01 STD
* 0x10 OFF
* 0x11 ONMOV
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/dmi.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/i8042.h>
#include <linux/serio.h>
#define IDEAPAD_BASE 0xff29
static bool force;
module_param(force, bool, 0);
MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
static DEFINE_SPINLOCK(io_lock);
static struct input_dev *slidebar_input_dev;
static struct platform_device *slidebar_platform_dev;
static u8 slidebar_pos_get(void)
{
u8 res;
unsigned long flags;
spin_lock_irqsave(&io_lock, flags);
outb(0xf4, 0xff29);
outb(0xbf, 0xff2a);
res = inb(0xff2b);
spin_unlock_irqrestore(&io_lock, flags);
return res;
}
static u8 slidebar_mode_get(void)
{
u8 res;
unsigned long flags;
spin_lock_irqsave(&io_lock, flags);
outb(0xf7, 0xff29);
outb(0x8b, 0xff2a);
res = inb(0xff2b);
spin_unlock_irqrestore(&io_lock, flags);
return res;
}
static void slidebar_mode_set(u8 mode)
{
unsigned long flags;
spin_lock_irqsave(&io_lock, flags);
outb(0xf7, 0xff29);
outb(0x8b, 0xff2a);
outb(mode, 0xff2b);
spin_unlock_irqrestore(&io_lock, flags);
}
static bool slidebar_i8042_filter(unsigned char data, unsigned char str,
struct serio *port)
{
static bool extended = false;
/* We are only interested in data coming form KBC port */
if (str & I8042_STR_AUXDATA)
return false;
/* Scancodes: e03b on move, e0bb on release. */
if (data == 0xe0) {
extended = true;
return true;
}
if (!extended)
return false;
extended = false;
if (likely((data & 0x7f) != 0x3b)) {
serio_interrupt(port, 0xe0, 0);
return false;
}
if (data & 0x80) {
input_report_key(slidebar_input_dev, BTN_TOUCH, 0);
} else {
input_report_key(slidebar_input_dev, BTN_TOUCH, 1);
input_report_abs(slidebar_input_dev, ABS_X, slidebar_pos_get());
}
input_sync(slidebar_input_dev);
return true;
}
static ssize_t show_slidebar_mode(struct device *dev,
struct device_attribute *attr,
char *buf)
{
return sprintf(buf, "%x\n", slidebar_mode_get());
}
static ssize_t store_slidebar_mode(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
u8 mode;
int error;
error = kstrtou8(buf, 0, &mode);
if (error)
return error;
slidebar_mode_set(mode);
return count;
}
static DEVICE_ATTR(slidebar_mode, S_IWUSR | S_IRUGO,
show_slidebar_mode, store_slidebar_mode);
static struct attribute *ideapad_attrs[] = {
&dev_attr_slidebar_mode.attr,
NULL
};
static struct attribute_group ideapad_attr_group = {
.attrs = ideapad_attrs
};
static const struct attribute_group *ideapad_attr_groups[] = {
&ideapad_attr_group,
NULL
};
static int __init ideapad_probe(struct platform_device* pdev)
{
int err;
if (!request_region(IDEAPAD_BASE, 3, "ideapad_slidebar")) {
dev_err(&pdev->dev, "IO ports are busy\n");
return -EBUSY;
}
slidebar_input_dev = input_allocate_device();
if (!slidebar_input_dev) {
dev_err(&pdev->dev, "Failed to allocate input device\n");
err = -ENOMEM;
goto err_release_ports;
}
slidebar_input_dev->name = "IdeaPad Slidebar";
slidebar_input_dev->id.bustype = BUS_HOST;
slidebar_input_dev->dev.parent = &pdev->dev;
input_set_capability(slidebar_input_dev, EV_KEY, BTN_TOUCH);
input_set_capability(slidebar_input_dev, EV_ABS, ABS_X);
input_set_abs_params(slidebar_input_dev, ABS_X, 0, 0xff, 0, 0);
err = i8042_install_filter(slidebar_i8042_filter);
if (err) {
dev_err(&pdev->dev,
"Failed to install i8042 filter: %d\n", err);
goto err_free_dev;
}
err = input_register_device(slidebar_input_dev);
if (err) {
dev_err(&pdev->dev,
"Failed to register input device: %d\n", err);
goto err_remove_filter;
}
return 0;
err_remove_filter:
i8042_remove_filter(slidebar_i8042_filter);
err_free_dev:
input_free_device(slidebar_input_dev);
err_release_ports:
release_region(IDEAPAD_BASE, 3);
return err;
}
static int ideapad_remove(struct platform_device *pdev)
{
i8042_remove_filter(slidebar_i8042_filter);
input_unregister_device(slidebar_input_dev);
release_region(IDEAPAD_BASE, 3);
return 0;
}
static struct platform_driver slidebar_drv = {
.driver = {
.name = "ideapad_slidebar",
.owner = THIS_MODULE,
},
.remove = ideapad_remove,
};
static int __init ideapad_dmi_check(const struct dmi_system_id *id)
{
pr_info("Laptop model '%s'\n", id->ident);
return 1;
}
static const struct dmi_system_id ideapad_dmi[] __initconst = {
{
.ident = "Lenovo IdeaPad Y550",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_NAME, "20017"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo IdeaPad Y550")
},
.callback = ideapad_dmi_check
},
{
.ident = "Lenovo IdeaPad Y550P",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_NAME, "20035"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo IdeaPad Y550P")
},
.callback = ideapad_dmi_check
},
{ NULL, }
};
MODULE_DEVICE_TABLE(dmi, ideapad_dmi);
static int __init slidebar_init(void)
{
int err;
if (!force && !dmi_check_system(ideapad_dmi)) {
pr_err("DMI does not match\n");
return -ENODEV;
}
slidebar_platform_dev = platform_device_alloc("ideapad_slidebar", -1);
if (!slidebar_platform_dev) {
pr_err("Not enough memory\n");
return -ENOMEM;
}
slidebar_platform_dev->dev.groups = ideapad_attr_groups;
err = platform_device_add(slidebar_platform_dev);
if (err) {
pr_err("Failed to register platform device\n");
goto err_free_dev;
}
err = platform_driver_probe(&slidebar_drv, ideapad_probe);
if (err) {
pr_err("Failed to register platform driver\n");
goto err_delete_dev;
}
return 0;
err_delete_dev:
platform_device_del(slidebar_platform_dev);
err_free_dev:
platform_device_put(slidebar_platform_dev);
return err;
}
static void __exit slidebar_exit(void)
{
platform_device_unregister(slidebar_platform_dev);
platform_driver_unregister(&slidebar_drv);
}
module_init(slidebar_init);
module_exit(slidebar_exit);
MODULE_AUTHOR("Andrey Moiseev <o2g.org.ru@gmail.com>");
MODULE_DESCRIPTION("Slidebar input support for some Lenovo IdeaPad laptops");
MODULE_LICENSE("GPL");
......@@ -143,7 +143,7 @@ static int pwm_beeper_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM
#ifdef CONFIG_PM_SLEEP
static int pwm_beeper_suspend(struct device *dev)
{
struct pwm_beeper *beeper = dev_get_drvdata(dev);
......
......@@ -257,7 +257,6 @@ static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL);
static int twl6040_vibra_probe(struct platform_device *pdev)
{
struct twl6040_vibra_data *pdata = pdev->dev.platform_data;
struct device *twl6040_core_dev = pdev->dev.parent;
struct device_node *twl6040_core_node = NULL;
struct vibra_info *info;
......@@ -270,8 +269,8 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
"vibra");
#endif
if (!pdata && !twl6040_core_node) {
dev_err(&pdev->dev, "platform_data not available\n");
if (!twl6040_core_node) {
dev_err(&pdev->dev, "parent of node is missing?\n");
return -EINVAL;
}
......@@ -284,27 +283,17 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
info->dev = &pdev->dev;
info->twl6040 = dev_get_drvdata(pdev->dev.parent);
if (pdata) {
info->vibldrv_res = pdata->vibldrv_res;
info->vibrdrv_res = pdata->vibrdrv_res;
info->viblmotor_res = pdata->viblmotor_res;
info->vibrmotor_res = pdata->vibrmotor_res;
vddvibl_uV = pdata->vddvibl_uV;
vddvibr_uV = pdata->vddvibr_uV;
} else {
of_property_read_u32(twl6040_core_node, "ti,vibldrv-res",
&info->vibldrv_res);
of_property_read_u32(twl6040_core_node, "ti,vibrdrv-res",
&info->vibrdrv_res);
of_property_read_u32(twl6040_core_node, "ti,viblmotor-res",
&info->viblmotor_res);
of_property_read_u32(twl6040_core_node, "ti,vibrmotor-res",
&info->vibrmotor_res);
of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV",
&vddvibl_uV);
of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV",
&vddvibr_uV);
}
of_property_read_u32(twl6040_core_node, "ti,vibldrv-res",
&info->vibldrv_res);
of_property_read_u32(twl6040_core_node, "ti,vibrdrv-res",
&info->vibrdrv_res);
of_property_read_u32(twl6040_core_node, "ti,viblmotor-res",
&info->viblmotor_res);
of_property_read_u32(twl6040_core_node, "ti,vibrmotor-res",
&info->vibrmotor_res);
of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV", &vddvibl_uV);
of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV", &vddvibr_uV);
if ((!info->vibldrv_res && !info->viblmotor_res) ||
(!info->vibrdrv_res && !info->vibrmotor_res)) {
......@@ -334,8 +323,8 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
* When booted with Device tree the regulators are attached to the
* parent device (twl6040 MFD core)
*/
ret = regulator_bulk_get(pdata ? info->dev : twl6040_core_dev,
ARRAY_SIZE(info->supplies), info->supplies);
ret = regulator_bulk_get(twl6040_core_dev, ARRAY_SIZE(info->supplies),
info->supplies);
if (ret) {
dev_err(info->dev, "couldn't get regulators %d\n", ret);
return ret;
......
......@@ -46,7 +46,6 @@
MODULE_AUTHOR("Miloslav Trmac <mitr@volny.cz>");
MODULE_DESCRIPTION("Wistron laptop button driver");
MODULE_LICENSE("GPL v2");
MODULE_VERSION("0.3");
static bool force; /* = 0; */
module_param(force, bool, 0);
......@@ -563,7 +562,7 @@ static struct key_entry keymap_wistron_md96500[] __initdata = {
{ KE_KEY, 0x36, {KEY_WWW} },
{ KE_WIFI, 0x30 },
{ KE_BLUETOOTH, 0x44 },
{ KE_END, FE_UNTESTED }
{ KE_END, 0 }
};
static struct key_entry keymap_wistron_generic[] __initdata = {
......@@ -635,7 +634,7 @@ static struct key_entry keymap_prestigio[] __initdata = {
* a list of buttons and their key codes (reported when loading this module
* with force=1) and the output of dmidecode to $MODULE_AUTHOR.
*/
static const struct dmi_system_id __initconst dmi_ids[] = {
static const struct dmi_system_id dmi_ids[] __initconst = {
{
/* Fujitsu-Siemens Amilo Pro V2000 */
.callback = dmi_matched,
......@@ -972,6 +971,7 @@ static const struct dmi_system_id __initconst dmi_ids[] = {
},
{ NULL, }
};
MODULE_DEVICE_TABLE(dmi, dmi_ids);
/* Copy the good keymap, as the original ones are free'd */
static int __init copy_keymap(void)
......
......@@ -44,7 +44,7 @@ static int lifebook_set_6byte_proto(const struct dmi_system_id *d)
return 1;
}
static const struct dmi_system_id __initconst lifebook_dmi_table[] = {
static const struct dmi_system_id lifebook_dmi_table[] __initconst = {
{
/* FLORA-ie 55mi */
.matches = {
......
......@@ -1433,7 +1433,7 @@ static int synaptics_reconnect(struct psmouse *psmouse)
static bool impaired_toshiba_kbc;
static const struct dmi_system_id __initconst toshiba_dmi_table[] = {
static const struct dmi_system_id toshiba_dmi_table[] __initconst = {
#if defined(CONFIG_DMI) && defined(CONFIG_X86)
{
/* Toshiba Satellite */
......@@ -1472,7 +1472,7 @@ static const struct dmi_system_id __initconst toshiba_dmi_table[] = {
static bool broken_olpc_ec;
static const struct dmi_system_id __initconst olpc_dmi_table[] = {
static const struct dmi_system_id olpc_dmi_table[] __initconst = {
#if defined(CONFIG_DMI) && defined(CONFIG_OLPC)
{
/* OLPC XO-1 or XO-1.5 */
......
......@@ -189,12 +189,6 @@ static int arc_ps2_probe(struct platform_device *pdev)
int irq;
int error, id, i;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "no IO memory defined\n");
return -EINVAL;
}
irq = platform_get_irq_byname(pdev, "arc_ps2_irq");
if (irq < 0) {
dev_err(&pdev->dev, "no IRQ defined\n");
......@@ -208,6 +202,7 @@ static int arc_ps2_probe(struct platform_device *pdev)
return -ENOMEM;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
arc_ps2->addr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(arc_ps2->addr))
return PTR_ERR(arc_ps2->addr);
......
......@@ -40,30 +40,6 @@
#define I8042_CTL_TIMEOUT 10000
/*
* Status register bits.
*/
#define I8042_STR_PARITY 0x80
#define I8042_STR_TIMEOUT 0x40
#define I8042_STR_AUXDATA 0x20
#define I8042_STR_KEYLOCK 0x10
#define I8042_STR_CMDDAT 0x08
#define I8042_STR_MUXERR 0x04
#define I8042_STR_IBF 0x02
#define I8042_STR_OBF 0x01
/*
* Control register bits.
*/
#define I8042_CTR_KBDINT 0x01
#define I8042_CTR_AUXINT 0x02
#define I8042_CTR_IGNKEYLOCK 0x08
#define I8042_CTR_KBDDIS 0x10
#define I8042_CTR_AUXDIS 0x20
#define I8042_CTR_XLATE 0x40
/*
* Return codes.
*/
......
......@@ -183,9 +183,6 @@ static int olpc_apsp_probe(struct platform_device *pdev)
np = pdev->dev.of_node;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENOENT;
priv->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(priv->base)) {
dev_err(&pdev->dev, "Failed to map WTM registers\n");
......
......@@ -221,39 +221,6 @@ static int wacom_calc_hid_res(int logical_extents, int physical_extents,
return logical_extents / physical_extents;
}
/*
* The physical dimension specified by the HID descriptor is likely not in
* the "100th of a mm" units expected by wacom_calculate_touch_res. This
* function adjusts the value of [xy]_phy based on the unit and exponent
* provided by the HID descriptor. If an error occurs durring conversion
* (e.g. from the unit being left unspecified) [xy]_phy is not modified.
*/
static void wacom_fix_phy_from_hid(struct wacom_features *features)
{
int xres = wacom_calc_hid_res(features->x_max, features->x_phy,
features->unit, features->unitExpo);
int yres = wacom_calc_hid_res(features->y_max, features->y_phy,
features->unit, features->unitExpo);
if (xres > 0 && yres > 0) {
features->x_phy = (100 * features->x_max) / xres;
features->y_phy = (100 * features->y_max) / yres;
}
}
/*
* Static values for max X/Y and resolution of Pen interface is stored in
* features. This mean physical size of active area can be computed.
* This is useful to do when Pen and Touch have same active area of tablet.
* This means for Touch device, we only need to find max X/Y value and we
* have enough information to compute resolution of touch.
*/
static void wacom_set_phy_from_res(struct wacom_features *features)
{
features->x_phy = (features->x_max * 100) / features->x_resolution;
features->y_phy = (features->y_max * 100) / features->y_resolution;
}
static int wacom_parse_logical_collection(unsigned char *report,
struct wacom_features *features)
{
......@@ -265,8 +232,6 @@ static int wacom_parse_logical_collection(unsigned char *report,
features->pktlen = WACOM_PKGLEN_BBTOUCH3;
features->device_type = BTN_TOOL_FINGER;
wacom_set_phy_from_res(features);
features->x_max = features->y_max =
get_unaligned_le16(&report[10]);
......@@ -640,9 +605,6 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf,
}
}
error = wacom_parse_hid(intf, hid_desc, features);
if (error)
goto out;
wacom_fix_phy_from_hid(features);
out:
return error;
......@@ -1228,7 +1190,6 @@ static void wacom_wireless_work(struct work_struct *work)
*((struct wacom_features *)id->driver_info);
wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
wacom_wac2->features.device_type = BTN_TOOL_FINGER;
wacom_set_phy_from_res(&wacom_wac2->features);
wacom_wac2->features.x_max = wacom_wac2->features.y_max = 4096;
error = wacom_register_input(wacom2);
if (error)
......@@ -1251,6 +1212,33 @@ static void wacom_wireless_work(struct work_struct *work)
return;
}
/*
* Not all devices report physical dimensions from HID.
* Compute the default from hardcoded logical dimension
* and resolution before driver overwrites them.
*/
static void wacom_set_default_phy(struct wacom_features *features)
{
if (features->x_resolution) {
features->x_phy = (features->x_max * 100) /
features->x_resolution;
features->y_phy = (features->y_max * 100) /
features->y_resolution;
}
}
static void wacom_calculate_res(struct wacom_features *features)
{
features->x_resolution = wacom_calc_hid_res(features->x_max,
features->x_phy,
features->unit,
features->unitExpo);
features->y_resolution = wacom_calc_hid_res(features->y_max,
features->y_phy,
features->unit,
features->unitExpo);
}
static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
......@@ -1297,6 +1285,9 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
endpoint = &intf->cur_altsetting->endpoint[0].desc;
/* set the default size in case we do not get them from hid */
wacom_set_default_phy(features);
/* Retrieve the physical and logical size for touch devices */
error = wacom_retrieve_hid_descriptor(intf, features);
if (error)
......@@ -1312,8 +1303,6 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
features->device_type = BTN_TOOL_FINGER;
features->pktlen = WACOM_PKGLEN_BBTOUCH3;
wacom_set_phy_from_res(features);
features->x_max = 4096;
features->y_max = 4096;
} else {
......@@ -1323,6 +1312,13 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
wacom_setup_device_quirks(features);
/* set unit to "100th of a mm" for devices not reported by HID */
if (!features->unit) {
features->unit = 0x11;
features->unitExpo = 16 - 3;
}
wacom_calculate_res(features);
strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name));
if (features->quirks & WACOM_QUIRK_MULTI_INPUT) {
......@@ -1334,7 +1330,6 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
" Pen" : " Finger",
sizeof(wacom_wac->name));
other_dev = wacom_get_sibling(dev, features->oVid, features->oPid);
if (other_dev == NULL || wacom_get_usbdev_data(other_dev) == NULL)
other_dev = dev;
......@@ -1366,8 +1361,10 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
usb_set_intfdata(intf, wacom);
if (features->quirks & WACOM_QUIRK_MONITOR) {
if (usb_submit_urb(wacom->irq, GFP_KERNEL))
if (usb_submit_urb(wacom->irq, GFP_KERNEL)) {
error = -EIO;
goto fail5;
}
}
return 0;
......@@ -1422,8 +1419,8 @@ static int wacom_resume(struct usb_interface *intf)
wacom_query_tablet_data(intf, features);
wacom_led_control(wacom);
if ((wacom->open || features->quirks & WACOM_QUIRK_MONITOR)
&& usb_submit_urb(wacom->irq, GFP_NOIO) < 0)
if ((wacom->open || (features->quirks & WACOM_QUIRK_MONITOR)) &&
usb_submit_urb(wacom->irq, GFP_NOIO) < 0)
rv = -EIO;
mutex_unlock(&wacom->lock);
......
......@@ -1445,13 +1445,6 @@ void wacom_setup_device_quirks(struct wacom_features *features)
}
}
static unsigned int wacom_calculate_touch_res(unsigned int logical_max,
unsigned int physical_max)
{
/* Touch physical dimensions are in 100th of mm */
return (logical_max * 100) / physical_max;
}
static void wacom_abs_set_axis(struct input_dev *input_dev,
struct wacom_wac *wacom_wac)
{
......@@ -1475,11 +1468,9 @@ static void wacom_abs_set_axis(struct input_dev *input_dev,
input_set_abs_params(input_dev, ABS_Y, 0,
features->y_max, features->y_fuzz, 0);
input_abs_set_res(input_dev, ABS_X,
wacom_calculate_touch_res(features->x_max,
features->x_phy));
features->x_resolution);
input_abs_set_res(input_dev, ABS_Y,
wacom_calculate_touch_res(features->y_max,
features->y_phy));
features->y_resolution);
}
if (features->touch_max > 1) {
......@@ -1488,11 +1479,9 @@ static void wacom_abs_set_axis(struct input_dev *input_dev,
input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
features->y_max, features->y_fuzz, 0);
input_abs_set_res(input_dev, ABS_MT_POSITION_X,
wacom_calculate_touch_res(features->x_max,
features->x_phy));
features->x_resolution);
input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
wacom_calculate_touch_res(features->y_max,
features->y_phy));
features->y_resolution);
}
}
}
......
......@@ -291,7 +291,7 @@ static int cy8ctmg110_probe(struct i2c_client *client,
return err;
}
#ifdef CONFIG_PM
#ifdef CONFIG_PM_SLEEP
static int cy8ctmg110_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
......@@ -319,9 +319,9 @@ static int cy8ctmg110_resume(struct device *dev)
}
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(cy8ctmg110_pm, cy8ctmg110_suspend, cy8ctmg110_resume);
#endif
static int cy8ctmg110_remove(struct i2c_client *client)
{
......@@ -351,9 +351,7 @@ static struct i2c_driver cy8ctmg110_driver = {
.driver = {
.owner = THIS_MODULE,
.name = CY8CTMG110_DRIVER_NAME,
#ifdef CONFIG_PM
.pm = &cy8ctmg110_pm,
#endif
},
.id_table = cy8ctmg110_idtable,
.probe = cy8ctmg110_probe,
......
......@@ -1246,9 +1246,6 @@ static void cyttsp4_watchdog_timer(unsigned long handle)
dev_vdbg(cd->dev, "%s: Watchdog timer triggered\n", __func__);
if (!cd)
return;
if (!work_pending(&cd->watchdog_work))
schedule_work(&cd->watchdog_work);
......@@ -1552,106 +1549,6 @@ static int cyttsp4_core_sleep_(struct cyttsp4 *cd)
return rc;
}
static int cyttsp4_core_sleep(struct cyttsp4 *cd)
{
int rc;
rc = cyttsp4_request_exclusive(cd, cd->dev,
CY_CORE_SLEEP_REQUEST_EXCLUSIVE_TIMEOUT);
if (rc < 0) {
dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n",
__func__, cd->exclusive_dev, cd->dev);
return 0;
}
rc = cyttsp4_core_sleep_(cd);
if (cyttsp4_release_exclusive(cd, cd->dev) < 0)
dev_err(cd->dev, "%s: fail to release exclusive\n", __func__);
else
dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__);
return rc;
}
static int cyttsp4_core_wake_(struct cyttsp4 *cd)
{
struct device *dev = cd->dev;
int rc;
u8 mode;
int t;
/* Already woken? */
mutex_lock(&cd->system_lock);
if (cd->sleep_state == SS_SLEEP_OFF) {
mutex_unlock(&cd->system_lock);
return 0;
}
cd->int_status &= ~CY_INT_IGNORE;
cd->int_status |= CY_INT_AWAKE;
cd->sleep_state = SS_WAKING;
if (cd->cpdata->power) {
dev_dbg(dev, "%s: Power up HW\n", __func__);
rc = cd->cpdata->power(cd->cpdata, 1, dev, &cd->ignore_irq);
} else {
dev_dbg(dev, "%s: No power function\n", __func__);
rc = -ENOSYS;
}
if (rc < 0) {
dev_err(dev, "%s: HW Power up fails r=%d\n",
__func__, rc);
/* Initiate a read transaction to wake up */
cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), &mode);
} else
dev_vdbg(cd->dev, "%s: HW power up succeeds\n",
__func__);
mutex_unlock(&cd->system_lock);
t = wait_event_timeout(cd->wait_q,
(cd->int_status & CY_INT_AWAKE) == 0,
msecs_to_jiffies(CY_CORE_WAKEUP_TIMEOUT));
if (IS_TMO(t)) {
dev_err(dev, "%s: TMO waiting for wakeup\n", __func__);
mutex_lock(&cd->system_lock);
cd->int_status &= ~CY_INT_AWAKE;
/* Try starting up */
cyttsp4_queue_startup_(cd);
mutex_unlock(&cd->system_lock);
}
mutex_lock(&cd->system_lock);
cd->sleep_state = SS_SLEEP_OFF;
mutex_unlock(&cd->system_lock);
cyttsp4_start_wd_timer(cd);
return 0;
}
static int cyttsp4_core_wake(struct cyttsp4 *cd)
{
int rc;
rc = cyttsp4_request_exclusive(cd, cd->dev,
CY_CORE_REQUEST_EXCLUSIVE_TIMEOUT);
if (rc < 0) {
dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n",
__func__, cd->exclusive_dev, cd->dev);
return 0;
}
rc = cyttsp4_core_wake_(cd);
if (cyttsp4_release_exclusive(cd, cd->dev) < 0)
dev_err(cd->dev, "%s: fail to release exclusive\n", __func__);
else
dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__);
return rc;
}
static int cyttsp4_startup_(struct cyttsp4 *cd)
{
int retry = CY_CORE_STARTUP_RETRY_COUNT;
......@@ -1821,6 +1718,106 @@ static void cyttsp4_free_si_ptrs(struct cyttsp4 *cd)
}
#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME)
static int cyttsp4_core_sleep(struct cyttsp4 *cd)
{
int rc;
rc = cyttsp4_request_exclusive(cd, cd->dev,
CY_CORE_SLEEP_REQUEST_EXCLUSIVE_TIMEOUT);
if (rc < 0) {
dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n",
__func__, cd->exclusive_dev, cd->dev);
return 0;
}
rc = cyttsp4_core_sleep_(cd);
if (cyttsp4_release_exclusive(cd, cd->dev) < 0)
dev_err(cd->dev, "%s: fail to release exclusive\n", __func__);
else
dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__);
return rc;
}
static int cyttsp4_core_wake_(struct cyttsp4 *cd)
{
struct device *dev = cd->dev;
int rc;
u8 mode;
int t;
/* Already woken? */
mutex_lock(&cd->system_lock);
if (cd->sleep_state == SS_SLEEP_OFF) {
mutex_unlock(&cd->system_lock);
return 0;
}
cd->int_status &= ~CY_INT_IGNORE;
cd->int_status |= CY_INT_AWAKE;
cd->sleep_state = SS_WAKING;
if (cd->cpdata->power) {
dev_dbg(dev, "%s: Power up HW\n", __func__);
rc = cd->cpdata->power(cd->cpdata, 1, dev, &cd->ignore_irq);
} else {
dev_dbg(dev, "%s: No power function\n", __func__);
rc = -ENOSYS;
}
if (rc < 0) {
dev_err(dev, "%s: HW Power up fails r=%d\n",
__func__, rc);
/* Initiate a read transaction to wake up */
cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), &mode);
} else
dev_vdbg(cd->dev, "%s: HW power up succeeds\n",
__func__);
mutex_unlock(&cd->system_lock);
t = wait_event_timeout(cd->wait_q,
(cd->int_status & CY_INT_AWAKE) == 0,
msecs_to_jiffies(CY_CORE_WAKEUP_TIMEOUT));
if (IS_TMO(t)) {
dev_err(dev, "%s: TMO waiting for wakeup\n", __func__);
mutex_lock(&cd->system_lock);
cd->int_status &= ~CY_INT_AWAKE;
/* Try starting up */
cyttsp4_queue_startup_(cd);
mutex_unlock(&cd->system_lock);
}
mutex_lock(&cd->system_lock);
cd->sleep_state = SS_SLEEP_OFF;
mutex_unlock(&cd->system_lock);
cyttsp4_start_wd_timer(cd);
return 0;
}
static int cyttsp4_core_wake(struct cyttsp4 *cd)
{
int rc;
rc = cyttsp4_request_exclusive(cd, cd->dev,
CY_CORE_REQUEST_EXCLUSIVE_TIMEOUT);
if (rc < 0) {
dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n",
__func__, cd->exclusive_dev, cd->dev);
return 0;
}
rc = cyttsp4_core_wake_(cd);
if (cyttsp4_release_exclusive(cd, cd->dev) < 0)
dev_err(cd->dev, "%s: fail to release exclusive\n", __func__);
else
dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__);
return rc;
}
static int cyttsp4_core_suspend(struct device *dev)
{
struct cyttsp4 *cd = dev_get_drvdata(dev);
......
......@@ -264,7 +264,7 @@ static int eeti_ts_remove(struct i2c_client *client)
return 0;
}
#ifdef CONFIG_PM
#ifdef CONFIG_PM_SLEEP
static int eeti_ts_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
......@@ -302,9 +302,9 @@ static int eeti_ts_resume(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(eeti_ts_pm, eeti_ts_suspend, eeti_ts_resume);
#endif
static const struct i2c_device_id eeti_ts_id[] = {
{ "eeti_ts", 0 },
......@@ -315,9 +315,7 @@ MODULE_DEVICE_TABLE(i2c, eeti_ts_id);
static struct i2c_driver eeti_ts_driver = {
.driver = {
.name = "eeti_ts",
#ifdef CONFIG_PM
.pm = &eeti_ts_pm,
#endif
},
.probe = eeti_ts_probe,
.remove = eeti_ts_remove,
......
......@@ -221,7 +221,7 @@ static struct isa_driver htcpen_isa_driver = {
}
};
static struct dmi_system_id __initdata htcshift_dmi_table[] = {
static struct dmi_system_id htcshift_dmi_table[] __initdata = {
{
.ident = "Shift",
.matches = {
......
......@@ -181,12 +181,11 @@ static int max11801_ts_probe(struct i2c_client *client,
struct input_dev *input_dev;
int error;
data = kzalloc(sizeof(struct max11801_data), GFP_KERNEL);
input_dev = input_allocate_device();
data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
input_dev = devm_input_allocate_device(&client->dev);
if (!data || !input_dev) {
dev_err(&client->dev, "Failed to allocate memory\n");
error = -ENOMEM;
goto err_free_mem;
return -ENOMEM;
}
data->client = client;
......@@ -205,38 +204,21 @@ static int max11801_ts_probe(struct i2c_client *client,
max11801_ts_phy_init(data);
error = request_threaded_irq(client->irq, NULL, max11801_ts_interrupt,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
"max11801_ts", data);
error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
max11801_ts_interrupt,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
"max11801_ts", data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
goto err_free_mem;
return error;
}
error = input_register_device(data->input_dev);
if (error)
goto err_free_irq;
return error;
i2c_set_clientdata(client, data);
return 0;
err_free_irq:
free_irq(client->irq, data);
err_free_mem:
input_free_device(input_dev);
kfree(data);
return error;
}
static int max11801_ts_remove(struct i2c_client *client)
{
struct max11801_data *data = i2c_get_clientdata(client);
free_irq(client->irq, data);
input_unregister_device(data->input_dev);
kfree(data);
return 0;
}
static const struct i2c_device_id max11801_ts_id[] = {
......@@ -252,7 +234,6 @@ static struct i2c_driver max11801_ts_driver = {
},
.id_table = max11801_ts_id,
.probe = max11801_ts_probe,
.remove = max11801_ts_remove,
};
module_i2c_driver(max11801_ts_driver);
......
......@@ -45,6 +45,7 @@
#include <linux/moduleparam.h>
#include <linux/jiffies.h>
#include <linux/syscalls.h>
#include <linux/of.h>
#include <asm/ptrace.h>
#include <asm/irq_regs.h>
......@@ -681,6 +682,40 @@ static void sysrq_detect_reset_sequence(struct sysrq_state *state,
}
}
#ifdef CONFIG_OF
static void sysrq_of_get_keyreset_config(void)
{
u32 key;
struct device_node *np;
struct property *prop;
const __be32 *p;
np = of_find_node_by_path("/chosen/linux,sysrq-reset-seq");
if (!np) {
pr_debug("No sysrq node found");
return;
}
/* Reset in case a __weak definition was present */
sysrq_reset_seq_len = 0;
of_property_for_each_u32(np, "keyset", prop, p, key) {
if (key == KEY_RESERVED || key > KEY_MAX ||
sysrq_reset_seq_len == SYSRQ_KEY_RESET_MAX)
break;
sysrq_reset_seq[sysrq_reset_seq_len++] = (unsigned short)key;
}
/* Get reset timeout if any. */
of_property_read_u32(np, "timeout-ms", &sysrq_reset_downtime_ms);
}
#else
static void sysrq_of_get_keyreset_config(void)
{
}
#endif
static void sysrq_reinject_alt_sysrq(struct work_struct *work)
{
struct sysrq_state *sysrq =
......@@ -914,6 +949,7 @@ static inline void sysrq_register_handler(void)
int error;
int i;
/* First check if a __weak interface was instantiated. */
for (i = 0; i < ARRAY_SIZE(sysrq_reset_seq); i++) {
key = platform_sysrq_reset_seq[i];
if (key == KEY_RESERVED || key > KEY_MAX)
......@@ -922,6 +958,12 @@ static inline void sysrq_register_handler(void)
sysrq_reset_seq[sysrq_reset_seq_len++] = key;
}
/*
* DT configuration takes precedence over anything that would
* have been defined via the __weak interface.
*/
sysrq_of_get_keyreset_config();
error = input_register_handler(&sysrq_handler);
if (error)
pr_err("Failed to register input handler, error %d", error);
......
......@@ -31,6 +31,30 @@
#define I8042_CMD_MUX_PFX 0x0090
#define I8042_CMD_MUX_SEND 0x1090
/*
* Status register bits.
*/
#define I8042_STR_PARITY 0x80
#define I8042_STR_TIMEOUT 0x40
#define I8042_STR_AUXDATA 0x20
#define I8042_STR_KEYLOCK 0x10
#define I8042_STR_CMDDAT 0x08
#define I8042_STR_MUXERR 0x04
#define I8042_STR_IBF 0x02
#define I8042_STR_OBF 0x01
/*
* Control register bits.
*/
#define I8042_CTR_KBDINT 0x01
#define I8042_CTR_AUXINT 0x02
#define I8042_CTR_IGNKEYLOCK 0x08
#define I8042_CTR_KBDDIS 0x10
#define I8042_CTR_AUXDIS 0x20
#define I8042_CTR_XLATE 0x40
struct serio;
#if defined(CONFIG_SERIO_I8042) || defined(CONFIG_SERIO_I8042_MODULE)
......
......@@ -194,6 +194,8 @@ struct input_keymap_entry {
#define SYN_CONFIG 1
#define SYN_MT_REPORT 2
#define SYN_DROPPED 3
#define SYN_MAX 0xf
#define SYN_CNT (SYN_MAX+1)
/*
* Keys and buttons
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment