Commit 8b8d017f authored by Steffen Trumtrar's avatar Steffen Trumtrar Committed by Alexandre Torgue

ARM: dts: stm32: Add new pinmux for sdmmc1_b4 on stm32mp15

Add another option for the SDMMC_B4 pins.
It is almost identical to sdmmc1_b4_pins_a but the SDMMC1_D2 pin.

This is used on the Phycore STM32MP1.
Signed-off-by: default avatarSteffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: default avatarAlexandre Torgue <alexandre.torgue@foss.st.com>
parent ab7a5cba
......@@ -1596,6 +1596,60 @@ pins {
};
};
sdmmc1_b4_pins_b: sdmmc1-b4-1 {
pins1 {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
<STM32_PINMUX('E', 6, AF8)>, /* SDMMC1_D2 */
<STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
<STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
slew-rate = <1>;
drive-push-pull;
bias-disable;
};
pins2 {
pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
slew-rate = <2>;
drive-push-pull;
bias-disable;
};
};
sdmmc1_b4_od_pins_b: sdmmc1-b4-od-1 {
pins1 {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
<STM32_PINMUX('E', 6, AF8)>, /* SDMMC1_D2 */
<STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
slew-rate = <1>;
drive-push-pull;
bias-disable;
};
pins2 {
pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
slew-rate = <2>;
drive-push-pull;
bias-disable;
};
pins3 {
pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
slew-rate = <1>;
drive-open-drain;
bias-disable;
};
};
sdmmc1_b4_sleep_pins_b: sdmmc1-b4-sleep-1 {
pins {
pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
<STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
<STM32_PINMUX('E', 6, ANALOG)>, /* SDMMC1_D2 */
<STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
<STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
<STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
};
};
sdmmc1_dir_pins_a: sdmmc1-dir-0 {
pins1 {
pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment