Commit 8b8fbd39 authored by Cory Maccarrone's avatar Cory Maccarrone Committed by Tony Lindgren

omap1: omap7xx clocks, mux, serial fixes

This change adds in the necessary clocks and mux pins for UART
control on omap7xx devices.  I also made a change in the serial
code to only try and initialize two UARTs in omap_serial_init, as
these devices don't have three.
Signed-off-by: default avatarCory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 35ddf7c0
......@@ -478,6 +478,24 @@ static struct clk usb_dc_ck7xx = {
.enable_bit = 8,
};
static struct clk uart1_7xx = {
.name = "uart1_ck",
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 12000000,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = 9,
};
static struct clk uart2_7xx = {
.name = "uart2_ck",
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 12000000,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = 11,
};
static struct clk mclk_1510 = {
.name = "mclk",
.ops = &clkops_generic,
......@@ -620,7 +638,9 @@ static struct omap_clk omap_clks[] = {
/* ULPD clocks */
CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310),
CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX),
CLK(NULL, "uart1_ck", &uart1_7xx, CK_7XX),
CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "uart2_ck", &uart2_7xx, CK_7XX),
CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310),
CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX),
CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310),
......
......@@ -70,6 +70,10 @@ MUX_CFG_7XX("SPI_7XX_3", 6, 13, 4, 12, 1, 0)
MUX_CFG_7XX("SPI_7XX_4", 6, 17, 4, 16, 1, 0)
MUX_CFG_7XX("SPI_7XX_5", 8, 25, 0, 24, 0, 0)
MUX_CFG_7XX("SPI_7XX_6", 9, 5, 0, 4, 0, 0)
/* UART pins */
MUX_CFG_7XX("UART_7XX_1", 3, 21, 0, 20, 0, 0)
MUX_CFG_7XX("UART_7XX_2", 8, 1, 6, 0, 0, 0)
};
#define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins)
#else
......
......@@ -122,6 +122,13 @@ void __init omap_serial_init(void)
for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) {
/* Don't look at UARTs higher than 2 for omap7xx */
if (cpu_is_omap7xx() && i > 1) {
serial_platform_data[i].membase = NULL;
serial_platform_data[i].mapbase = 0;
continue;
}
/* Static mapping, never released */
serial_platform_data[i].membase =
ioremap(serial_platform_data[i].mapbase, SZ_2K);
......
......@@ -191,6 +191,10 @@ enum omap7xx_index {
SPI_7XX_4,
SPI_7XX_5,
SPI_7XX_6,
/* UART */
UART_7XX_1,
UART_7XX_2,
};
enum omap1xxx_index {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment