brcmfmac: cleanup brcmf_cfg80211_escan() function

The function brcmf_cfg80211_escan() was always called with a non-null
request parameter and null pointer for this_ssid parameter. Clean up
the function removing the dead code path.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c

@@ -1072,18 +1072,10 @@ brcmf_do_escan(struct brcmf_if *ifp, struct cfg80211_scan_request *request)
 
 static s32
 brcmf_cfg80211_escan(struct wiphy *wiphy, struct brcmf_cfg80211_vif *vif,
-		     struct cfg80211_scan_request *request,
-		     struct cfg80211_ssid *this_ssid)
+		     struct cfg80211_scan_request *request)
 {
-	struct brcmf_if *ifp = vif->ifp;
 	struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
-	struct cfg80211_ssid *ssids;
-	u32 passive_scan;
-	bool escan_req;
-	bool spec_scan;
 	s32 err;
-	struct brcmf_ssid_le ssid_le;
-	u32 SSID_len;
 
 	brcmf_dbg(SCAN, "START ESCAN\n");
 
@@ -1101,8 +1093,8 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct brcmf_cfg80211_vif *vif,
 			  cfg->scan_status);
 		return -EAGAIN;
 	}
-	if (test_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state)) {
-		brcmf_err("Connecting: status (%lu)\n", ifp->vif->sme_state);
+	if (test_bit(BRCMF_VIF_STATUS_CONNECTING, &vif->sme_state)) {
+		brcmf_err("Connecting: status (%lu)\n", vif->sme_state);
 		return -EAGAIN;
 	}
 
@@ -1110,63 +1102,17 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct brcmf_cfg80211_vif *vif,
 	if (vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif)
 		vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif;
 
-	escan_req = false;
-	if (request) {
-		/* scan bss */
-		ssids = request->ssids;
-		escan_req = true;
-	} else {
-		/* scan in ibss */
-		/* we don't do escan in ibss */
-		ssids = this_ssid;
-	}
-
 	cfg->scan_request = request;
 	set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
-	if (escan_req) {
-		cfg->escan_info.run = brcmf_run_escan;
-		err = brcmf_p2p_scan_prep(wiphy, request, vif);
-		if (err)
-			goto scan_out;
-
-		err = brcmf_do_escan(vif->ifp, request);
-		if (err)
-			goto scan_out;
-	} else {
-		brcmf_dbg(SCAN, "ssid \"%s\", ssid_len (%d)\n",
-			  ssids->ssid, ssids->ssid_len);
-		memset(&ssid_le, 0, sizeof(ssid_le));
-		SSID_len = min_t(u8, sizeof(ssid_le.SSID), ssids->ssid_len);
-		ssid_le.SSID_len = cpu_to_le32(0);
-		spec_scan = false;
-		if (SSID_len) {
-			memcpy(ssid_le.SSID, ssids->ssid, SSID_len);
-			ssid_le.SSID_len = cpu_to_le32(SSID_len);
-			spec_scan = true;
-		} else
-			brcmf_dbg(SCAN, "Broadcast scan\n");
 
-		passive_scan = cfg->active_scan ? 0 : 1;
-		err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PASSIVE_SCAN,
-					    passive_scan);
-		if (err) {
-			brcmf_err("WLC_SET_PASSIVE_SCAN error (%d)\n", err);
-			goto scan_out;
-		}
-		brcmf_scan_config_mpc(ifp, 0);
-		err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SCAN, &ssid_le,
-					     sizeof(ssid_le));
-		if (err) {
-			if (err == -EBUSY)
-				brcmf_dbg(INFO, "BUSY: scan for \"%s\" canceled\n",
-					  ssid_le.SSID);
-			else
-				brcmf_err("WLC_SCAN error (%d)\n", err);
+	cfg->escan_info.run = brcmf_run_escan;
+	err = brcmf_p2p_scan_prep(wiphy, request, vif);
+	if (err)
+		goto scan_out;
 
-			brcmf_scan_config_mpc(ifp, 1);
-			goto scan_out;
-		}
-	}
+	err = brcmf_do_escan(vif->ifp, request);
+	if (err)
+		goto scan_out;
 
 	/* Arm scan timeout timer */
 	mod_timer(&cfg->escan_timeout, jiffies +
@@ -1191,7 +1137,7 @@ brcmf_cfg80211_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request)
 	if (!check_vif_up(vif))
 		return -EIO;
 
-	err = brcmf_cfg80211_escan(wiphy, vif, request, NULL);
+	err = brcmf_cfg80211_escan(wiphy, vif, request);
 
 	if (err)
 		brcmf_err("scan error (%d)\n", err);