[SCSI] bfa: Revert back the current LUN Masking Implementation.

This patch reverts the current LUN Masking Implementation.  We re-implemented
this feature using the SCSI Slave Callout's as per the review comments.
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/bfa/bfa_defs_svc.h

@@ -673,12 +673,7 @@ struct bfa_itnim_iostats_s {
 	u32	tm_iocdowns;		/*  TM cleaned-up due to IOC down   */
 	u32	tm_cleanups;		/*  TM cleanup requests	*/
 	u32	tm_cleanup_comps;	/*  TM cleanup completions	*/
-	u32	lm_lun_across_sg;	/*  LM lun is across sg data buf */
-	u32	lm_lun_not_sup;		/*  LM lun not supported */
-	u32	lm_rpl_data_changed;	/*  LM report-lun data changed */
-	u32	lm_wire_residue_changed; /* LM report-lun rsp residue changed */
-	u32	lm_small_buf_addresidue; /* LM buf smaller than reported cnt */
-	u32	lm_lun_not_rdy;		/* LM lun not ready */
+	u32	rsvd[6];
 };
 
 /* Modify char* port_stt[] in bfal_port.c if a new state was added */

drivers/scsi/bfa/bfa_fc.h

@@ -56,161 +56,6 @@ struct scsi_cdb_s {
 
 #define SCSI_MAX_ALLOC_LEN      0xFF    /* maximum allocarion length */
 
-#define SCSI_SENSE_CUR_ERR	0x70
-#define SCSI_SENSE_DEF_ERR	0x71
-
-/*
- * SCSI additional sense codes
- */
-#define SCSI_ASC_LUN_NOT_READY		0x04
-#define SCSI_ASC_LUN_NOT_SUPPORTED	0x25
-#define SCSI_ASC_TOCC			0x3F
-
-/*
- * SCSI additional sense code qualifiers
- */
-#define SCSI_ASCQ_MAN_INTR_REQ		0x03	/* manual intervention req */
-#define SCSI_ASCQ_RL_DATA_CHANGED	0x0E	/* report luns data changed */
-
-/*
- * Methods of reporting informational exceptions
- */
-#define SCSI_MP_IEC_UNIT_ATTN		0x2	/* generate unit attention */
-
-struct scsi_report_luns_data_s {
-	u32		lun_list_length;	/* length of LUN list length */
-	u32		reserved;
-	struct scsi_lun	lun[1];			/* first LUN in lun list */
-};
-
-struct scsi_inquiry_vendor_s {
-	u8	vendor_id[8];
-};
-
-struct scsi_inquiry_prodid_s {
-	u8	product_id[16];
-};
-
-struct scsi_inquiry_prodrev_s {
-	u8	product_rev[4];
-};
-
-struct scsi_inquiry_data_s {
-#ifdef __BIG_ENDIAN
-	u8		peripheral_qual:3;	/* peripheral qualifier */
-	u8		device_type:5;		/* peripheral device type */
-	u8		rmb:1;			/* removable medium bit */
-	u8		device_type_mod:7;	/* device type modifier */
-	u8		version;
-	u8		aenc:1;		/* async evt notification capability */
-	u8		trm_iop:1;	/* terminate I/O process */
-	u8		norm_aca:1;	/* normal ACA supported */
-	u8		hi_support:1;	/* SCSI-3: supports REPORT LUNS */
-	u8		rsp_data_format:4;
-	u8		additional_len;
-	u8		sccs:1;
-	u8		reserved1:7;
-	u8		reserved2:1;
-	u8		enc_serv:1;	/* enclosure service component */
-	u8		reserved3:1;
-	u8		multi_port:1;	/* multi-port device */
-	u8		m_chngr:1;	/* device in medium transport element */
-	u8		ack_req_q:1;	/* SIP specific bit */
-	u8		addr32:1;	/* SIP specific bit */
-	u8		addr16:1;	/* SIP specific bit */
-	u8		rel_adr:1;	/* relative address */
-	u8		w_bus32:1;
-	u8		w_bus16:1;
-	u8		synchronous:1;
-	u8		linked_commands:1;
-	u8		trans_dis:1;
-	u8		cmd_queue:1;	/* command queueing supported */
-	u8		soft_reset:1;	/* soft reset alternative (VS) */
-#else
-	u8		device_type:5;	/* peripheral device type */
-	u8		peripheral_qual:3; /* peripheral qualifier */
-	u8		device_type_mod:7; /* device type modifier */
-	u8		rmb:1;		/* removable medium bit */
-	u8		version;
-	u8		rsp_data_format:4;
-	u8		hi_support:1;	/* SCSI-3: supports REPORT LUNS */
-	u8		norm_aca:1;	/* normal ACA supported */
-	u8		terminate_iop:1;/* terminate I/O process */
-	u8		aenc:1;		/* async evt notification capability */
-	u8		additional_len;
-	u8		reserved1:7;
-	u8		sccs:1;
-	u8		addr16:1;	/* SIP specific bit */
-	u8		addr32:1;	/* SIP specific bit */
-	u8		ack_req_q:1;	/* SIP specific bit */
-	u8		m_chngr:1;	/* device in medium transport element */
-	u8		multi_port:1;	/* multi-port device */
-	u8		reserved3:1;	/* TBD - Vendor Specific */
-	u8		enc_serv:1;	/* enclosure service component */
-	u8		reserved2:1;
-	u8		soft_seset:1;	/* soft reset alternative (VS) */
-	u8		cmd_queue:1;	/* command queueing supported */
-	u8		trans_dis:1;
-	u8		linked_commands:1;
-	u8		synchronous:1;
-	u8		w_bus16:1;
-	u8		w_bus32:1;
-	u8		rel_adr:1;	/* relative address */
-#endif
-	struct scsi_inquiry_vendor_s	vendor_id;
-	struct scsi_inquiry_prodid_s	product_id;
-	struct scsi_inquiry_prodrev_s	product_rev;
-	u8		vendor_specific[20];
-	u8		reserved4[40];
-};
-
-/*
- *	SCSI sense data format
- */
-struct scsi_sense_s {
-#ifdef __BIG_ENDIAN
-	u8		valid:1;
-	u8		rsp_code:7;
-#else
-	u8		rsp_code:7;
-	u8		valid:1;
-#endif
-	u8		seg_num;
-#ifdef __BIG_ENDIAN
-	u8		file_mark:1;
-	u8		eom:1;		/* end of media */
-	u8		ili:1;		/* incorrect length indicator */
-	u8		reserved:1;
-	u8		sense_key:4;
-#else
-	u8		sense_key:4;
-	u8		reserved:1;
-	u8		ili:1;		/* incorrect length indicator */
-	u8		eom:1;		/* end of media */
-	u8		file_mark:1;
-#endif
-	u8		information[4];	/* device-type or cmd specific info */
-	u8		add_sense_length; /* additional sense length */
-	u8		command_info[4];/* command specific information */
-	u8		asc;		/* additional sense code */
-	u8		ascq;		/* additional sense code qualifier */
-	u8		fru_code;	/* field replaceable unit code */
-#ifdef __BIG_ENDIAN
-	u8		sksv:1;		/* sense key specific valid */
-	u8		c_d:1;		/* command/data bit */
-	u8		res1:2;
-	u8		bpv:1;		/* bit pointer valid */
-	u8		bpointer:3;	/* bit pointer */
-#else
-	u8		bpointer:3;	/* bit pointer */
-	u8		bpv:1;		/* bit pointer valid */
-	u8		res1:2;
-	u8		c_d:1;		/* command/data bit */
-	u8		sksv:1;		/* sense key specific valid */
-#endif
-	u8		fpointer[2];	/* field pointer */
-};
-
 /*
  * Fibre Channel Header Structure (FCHS) definition
  */

drivers/scsi/bfa/bfa_fcpim.h

@@ -110,7 +110,6 @@ struct bfad_ioim_s;
 struct bfad_tskim_s;
 
 typedef void    (*bfa_fcpim_profile_t) (struct bfa_ioim_s *ioim);
-typedef bfa_boolean_t (*bfa_ioim_lm_proc_rsp_data_t) (struct bfa_ioim_s *ioim);
 
 struct bfa_fcpim_s {
 	struct bfa_s		*bfa;
@@ -124,7 +123,6 @@ struct bfa_fcpim_s {
 	u32			path_tov;
 	u16			q_depth;
 	u8			reqq;		/*  Request queue to be used */
-	u8			lun_masking_pending;
 	struct list_head	itnim_q;	/*  queue of active itnim */
 	struct list_head	ioim_resfree_q; /*  IOs waiting for f/w */
 	struct list_head	ioim_comp_q;	/*  IO global comp Q	*/
@@ -181,7 +179,6 @@ struct bfa_ioim_s {
 	u8			reqq;		/*  Request queue for I/O */
 	u8			mode;		/*  IO is passthrough or not */
 	u64			start_time;	/*  IO's Profile start val */
-	bfa_ioim_lm_proc_rsp_data_t proc_rsp_data; /* RSP data adjust */
 };
 
 struct bfa_ioim_sp_s {
@@ -261,10 +258,6 @@ struct bfa_itnim_s {
 	(__ioim)->iotag |= k << BFA_IOIM_RETRY_TAG_OFFSET;		\
 } while (0)
 
-#define BFA_IOIM_TO_LPS(__ioim)		\
-	BFA_LPS_FROM_TAG(BFA_LPS_MOD(__ioim->bfa),	\
-		__ioim->itnim->rport->rport_info.lp_tag)
-
 static inline bfa_boolean_t
 bfa_ioim_maxretry_reached(struct bfa_ioim_s *ioim)
 {

drivers/scsi/bfa/bfa_svc.h

@@ -582,11 +582,6 @@ void bfa_cb_rport_qos_scn_prio(void *rport,
 #define BFA_LP_TAG_INVALID	0xff
 void	bfa_rport_set_lunmask(struct bfa_s *bfa, struct bfa_rport_s *rp);
 void	bfa_rport_unset_lunmask(struct bfa_s *bfa, struct bfa_rport_s *rp);
-bfa_boolean_t	bfa_rport_lunmask_active(struct bfa_rport_s *rp);
-wwn_t	bfa_rport_get_pwwn(struct bfa_s *bfa, struct bfa_rport_s *rp);
-struct bfa_rport_s *bfa_rport_get_by_wwn(struct bfa_s *bfa, u16 vf_id,
-					 wwn_t *lpwwn, wwn_t rpwwn);
-void *bfa_cb_get_rp_by_wwn(void *arg, u16 vf_id, wwn_t *lpwwn, wwn_t rpwwn);
 
 /*
  * bfa fcxp API functions