Merge branches 'fixes' and 'misc' into for-next

Documentation/arm/memory.rst

@@ -45,9 +45,14 @@ fffe8000	fffeffff	DTCM mapping area for platforms with
 fffe0000	fffe7fff	ITCM mapping area for platforms with
 				ITCM mounted inside the CPU.
 
-ffc00000	ffefffff	Fixmap mapping region.  Addresses provided
+ffc80000	ffefffff	Fixmap mapping region.  Addresses provided
 				by fix_to_virt() will be located here.
 
+ffc00000	ffc7ffff	Guard region
+
+ff800000	ffbfffff	Permanent, fixed read-only mapping of the
+				firmware provided DT blob
+
 fee00000	feffffff	Mapping of PCI I/O space. This is a static
 				mapping within the vmalloc space.
 
@@ -72,6 +77,11 @@ MODULES_VADDR	MODULES_END-1	Kernel module space
 				Kernel modules inserted via insmod are
 				placed here using dynamic mappings.
 
+TASK_SIZE	MODULES_VADDR-1	KASAn shadow memory when KASan is in use.
+				The range from MODULES_VADDR to the top
+				of the memory is shadowed here with 1 bit
+				per byte of memory.
+
 00001000	TASK_SIZE-1	User space mappings
 				Per-thread mappings are placed here via
 				the mmap() system call.

Documentation/dev-tools/kasan.rst

@@ -18,8 +18,8 @@ out-of-bounds accesses for global variables is only supported since Clang 11.
 
 Tag-based KASAN is only supported in Clang.
 
-Currently generic KASAN is supported for the x86_64, arm64, xtensa, s390 and
-riscv architectures, and tag-based KASAN is supported only for arm64.
+Currently generic KASAN is supported for the x86_64, arm, arm64, xtensa, s390
+and riscv architectures, and tag-based KASAN is supported only for arm64.
 
 Usage
 -----

Documentation/features/debug/KASAN/arch-support.txt

@@ -8,7 +8,7 @@
     -----------------------
     |       alpha: | TODO |
     |         arc: | TODO |
-    |         arm: | TODO |
+    |         arm: |  ok  |
     |       arm64: |  ok  |
     |         c6x: | TODO |
     |        csky: | TODO |

arch/arm/Kconfig

@@ -67,6 +67,7 @@ config ARM
 	select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
 	select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
+	select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
 	select HAVE_ARCH_SECCOMP
 	select HAVE_ARCH_SECCOMP_FILTER if AEABI && !OABI_COMPAT
@@ -1323,6 +1324,15 @@ config PAGE_OFFSET
 	default 0xB0000000 if VMSPLIT_3G_OPT
 	default 0xC0000000
 
+config KASAN_SHADOW_OFFSET
+	hex
+	depends on KASAN
+	default 0x1f000000 if PAGE_OFFSET=0x40000000
+	default 0x5f000000 if PAGE_OFFSET=0x80000000
+	default 0x9f000000 if PAGE_OFFSET=0xC0000000
+	default 0x8f000000 if PAGE_OFFSET=0xB0000000
+	default 0xffffffff
+
 config NR_CPUS
 	int "Maximum number of CPUs (2-32)"
 	range 2 32

arch/arm/Makefile

@@ -10,7 +10,7 @@
 #
 # Copyright (C) 1995-2001 by Russell King
 
-LDFLAGS_vmlinux	:= --no-undefined -X --pic-veneer
+LDFLAGS_vmlinux	:= --no-undefined -X --pic-veneer -z norelro
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux	+= --be8
 KBUILD_LDFLAGS_MODULE	+= --be8

arch/arm/boot/compressed/Makefile

@@ -24,6 +24,7 @@ OBJS		+= hyp-stub.o
 endif
 
 GCOV_PROFILE		:= n
+KASAN_SANITIZE		:= n
 
 # Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
 KCOV_INSTRUMENT		:= n

arch/arm/boot/compressed/head.S

@@ -11,6 +11,12 @@
 
 #include "efi-header.S"
 
+#ifdef __ARMEB__
+#define OF_DT_MAGIC 0xd00dfeed
+#else
+#define OF_DT_MAGIC 0xedfe0dd0
+#endif
+
  AR_CLASS(	.arch	armv7-a	)
  M_CLASS(	.arch	armv7-m	)
 
@@ -116,7 +122,7 @@
 		/*
 		 * Debug print of the final appended DTB location
 		 */
-		.macro dbgadtb, begin, end
+		.macro dbgadtb, begin, size
 #ifdef DEBUG
 		kputc   #'D'
 		kputc   #'T'
@@ -129,7 +135,7 @@
 		kputc	#'('
 		kputc	#'0'
 		kputc	#'x'
-		kphex	\end, 8		/* End of appended DTB */
+		kphex	\size, 8	/* Size of appended DTB */
 		kputc	#')'
 		kputc	#'\n'
 #endif
@@ -165,6 +171,16 @@
 		orr	\res, \res, \tmp1, lsl #24
 		.endm
 
+		.macro	be32tocpu, val, tmp
+#ifndef __ARMEB__
+		/* convert to little endian */
+		eor	\tmp, \val, \val, ror #16
+		bic	\tmp, \tmp, #0x00ff0000
+		mov	\val, \val, ror #8
+		eor	\val, \val, \tmp, lsr #8
+#endif
+		.endm
+
 		.section ".start", "ax"
 /*
  * sort out different calling conventions
@@ -325,11 +341,7 @@ restart:	adr	r0, LC1
  */
 
 		ldr	lr, [r6, #0]
-#ifndef __ARMEB__
-		ldr	r1, =0xedfe0dd0		@ sig is 0xd00dfeed big endian
-#else
-		ldr	r1, =0xd00dfeed
-#endif
+		ldr	r1, =OF_DT_MAGIC
 		cmp	lr, r1
 		bne	dtb_check_done		@ not found
 
@@ -345,13 +357,7 @@ restart:	adr	r0, LC1
 
 		/* Get the initial DTB size */
 		ldr	r5, [r6, #4]
-#ifndef __ARMEB__
-		/* convert to little endian */
-		eor	r1, r5, r5, ror #16
-		bic	r1, r1, #0x00ff0000
-		mov	r5, r5, ror #8
-		eor	r5, r5, r1, lsr #8
-#endif
+		be32tocpu r5, r1
 		dbgadtb	r6, r5
 		/* 50% DTB growth should be good enough */
 		add	r5, r5, r5, lsr #1
@@ -403,13 +409,7 @@ restart:	adr	r0, LC1
 
 		/* Get the current DTB size */
 		ldr	r5, [r6, #4]
-#ifndef __ARMEB__
-		/* convert r5 (dtb size) to little endian */
-		eor	r1, r5, r5, ror #16
-		bic	r1, r1, #0x00ff0000
-		mov	r5, r5, ror #8
-		eor	r5, r5, r1, lsr #8
-#endif
+		be32tocpu r5, r1
 
 		/* preserve 64-bit alignment */
 		add	r5, r5, #7

arch/arm/boot/compressed/string.c

@@ -7,6 +7,25 @@
 
 #include <linux/string.h>
 
+/*
+ * The decompressor is built without KASan but uses the same redirects as the
+ * rest of the kernel when CONFIG_KASAN is enabled, defining e.g. memcpy()
+ * to __memcpy() but since we are not linking with the main kernel string
+ * library in the decompressor, that will lead to link failures.
+ *
+ * Undefine KASan's versions, define the wrapped functions and alias them to
+ * the right names so that when e.g. __memcpy() appear in the code, it will
+ * still be linked to this local version of memcpy().
+ */
+#ifdef CONFIG_KASAN
+#undef memcpy
+#undef memmove
+#undef memset
+void *__memcpy(void *__dest, __const void *__src, size_t __n) __alias(memcpy);
+void *__memmove(void *__dest, __const void *__src, size_t count) __alias(memmove);
+void *__memset(void *s, int c, size_t count) __alias(memset);
+#endif
+
 void *memcpy(void *__dest, __const void *__src, size_t __n)
 {
 	int i = 0;

arch/arm/include/asm/fixmap.h

@@ -2,7 +2,7 @@
 #ifndef _ASM_FIXMAP_H
 #define _ASM_FIXMAP_H
 
-#define FIXADDR_START		0xffc00000UL
+#define FIXADDR_START		0xffc80000UL
 #define FIXADDR_END		0xfff00000UL
 #define FIXADDR_TOP		(FIXADDR_END - PAGE_SIZE)
 

arch/arm/include/asm/kasan.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/include/asm/kasan.h
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Author: Andrey Ryabinin <ryabinin.a.a@gmail.com>
+ *
+ */
+
+#ifndef __ASM_KASAN_H
+#define __ASM_KASAN_H
+
+#ifdef CONFIG_KASAN
+
+#include <asm/kasan_def.h>
+
+#define KASAN_SHADOW_SCALE_SHIFT 3
+
+/*
+ * The compiler uses a shadow offset assuming that addresses start
+ * from 0. Kernel addresses don't start from 0, so shadow
+ * for kernel really starts from 'compiler's shadow offset' +
+ * ('kernel address space start' >> KASAN_SHADOW_SCALE_SHIFT)
+ */
+
+asmlinkage void kasan_early_init(void);
+extern void kasan_init(void);
+
+#else
+static inline void kasan_init(void) { }
+#endif
+
+#endif

arch/arm/include/asm/kasan_def.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  arch/arm/include/asm/kasan_def.h
+ *
+ *  Copyright (c) 2018 Huawei Technologies Co., Ltd.
+ *
+ *  Author: Abbott Liu <liuwenliang@huawei.com>
+ */
+
+#ifndef __ASM_KASAN_DEF_H
+#define __ASM_KASAN_DEF_H
+
+#ifdef CONFIG_KASAN
+
+/*
+ * Define KASAN_SHADOW_OFFSET,KASAN_SHADOW_START and KASAN_SHADOW_END for
+ * the Arm kernel address sanitizer. We are "stealing" lowmem (the 4GB
+ * addressable by a 32bit architecture) out of the virtual address
+ * space to use as shadow memory for KASan as follows:
+ *
+ * +----+ 0xffffffff
+ * |    |							\
+ * |    | |-> Static kernel image (vmlinux) BSS and page table
+ * |    |/
+ * +----+ PAGE_OFFSET
+ * |    |							\
+ * |    | |->  Loadable kernel modules virtual address space area
+ * |    |/
+ * +----+ MODULES_VADDR = KASAN_SHADOW_END
+ * |    |						\
+ * |    | |-> The shadow area of kernel virtual address.
+ * |    |/
+ * +----+->  TASK_SIZE (start of kernel space) = KASAN_SHADOW_START the
+ * |    |\   shadow address of MODULES_VADDR
+ * |    | |
+ * |    | |
+ * |    | |-> The user space area in lowmem. The kernel address
+ * |    | |   sanitizer do not use this space, nor does it map it.
+ * |    | |
+ * |    | |
+ * |    | |
+ * |    | |
+ * |    |/
+ * ------ 0
+ *
+ * 1) KASAN_SHADOW_START
+ *   This value begins with the MODULE_VADDR's shadow address. It is the
+ *   start of kernel virtual space. Since we have modules to load, we need
+ *   to cover also that area with shadow memory so we can find memory
+ *   bugs in modules.
+ *
+ * 2) KASAN_SHADOW_END
+ *   This value is the 0x100000000's shadow address: the mapping that would
+ *   be after the end of the kernel memory at 0xffffffff. It is the end of
+ *   kernel address sanitizer shadow area. It is also the start of the
+ *   module area.
+ *
+ * 3) KASAN_SHADOW_OFFSET:
+ *   This value is used to map an address to the corresponding shadow
+ *   address by the following formula:
+ *
+ *	shadow_addr = (address >> 3) + KASAN_SHADOW_OFFSET;
+ *
+ *  As you would expect, >> 3 is equal to dividing by 8, meaning each
+ *  byte in the shadow memory covers 8 bytes of kernel memory, so one
+ *  bit shadow memory per byte of kernel memory is used.
+ *
+ *  The KASAN_SHADOW_OFFSET is provided in a Kconfig option depending
+ *  on the VMSPLIT layout of the system: the kernel and userspace can
+ *  split up lowmem in different ways according to needs, so we calculate
+ *  the shadow offset depending on this.
+ */
+
+#define KASAN_SHADOW_SCALE_SHIFT	3
+#define KASAN_SHADOW_OFFSET	_AC(CONFIG_KASAN_SHADOW_OFFSET, UL)
+#define KASAN_SHADOW_END	((UL(1) << (32 - KASAN_SHADOW_SCALE_SHIFT)) \
+				 + KASAN_SHADOW_OFFSET)
+#define KASAN_SHADOW_START      ((KASAN_SHADOW_END >> 3) + KASAN_SHADOW_OFFSET)
+
+#endif
+#endif

arch/arm/include/asm/memory.h

@@ -18,6 +18,7 @@
 #ifdef CONFIG_NEED_MACH_MEMORY_H
 #include <mach/memory.h>
 #endif
+#include <asm/kasan_def.h>
 
 /* PAGE_OFFSET - the virtual address of the start of the kernel image */
 #define PAGE_OFFSET		UL(CONFIG_PAGE_OFFSET)
@@ -28,7 +29,11 @@
  * TASK_SIZE - the maximum size of a user space task.
  * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
  */
+#ifndef CONFIG_KASAN
 #define TASK_SIZE		(UL(CONFIG_PAGE_OFFSET) - UL(SZ_16M))
+#else
+#define TASK_SIZE		(KASAN_SHADOW_START)
+#endif
 #define TASK_UNMAPPED_BASE	ALIGN(TASK_SIZE / 3, SZ_16M)
 
 /*
@@ -67,6 +72,10 @@
  */
 #define XIP_VIRT_ADDR(physaddr)  (MODULES_VADDR + ((physaddr) & 0x000fffff))
 
+#define FDT_FIXED_BASE		UL(0xff800000)
+#define FDT_FIXED_SIZE		(2 * SECTION_SIZE)
+#define FDT_VIRT_BASE(physbase)	((void *)(FDT_FIXED_BASE | (physbase) % SECTION_SIZE))
+
 #if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
 /*
  * Allow 16MB-aligned ioremap pages
@@ -107,6 +116,7 @@ extern unsigned long vectors_base;
 #define MODULES_VADDR		PAGE_OFFSET
 
 #define XIP_VIRT_ADDR(physaddr)  (physaddr)
+#define FDT_VIRT_BASE(physbase)  ((void *)(physbase))
 
 #endif /* !CONFIG_MMU */
 

arch/arm/include/asm/pgalloc.h

@@ -21,6 +21,7 @@
 #define _PAGE_KERNEL_TABLE	(PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL))
 
 #ifdef CONFIG_ARM_LPAE
+#define PGD_SIZE		(PTRS_PER_PGD * sizeof(pgd_t))
 
 static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
 {
@@ -28,14 +29,19 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
 }
 
 #else	/* !CONFIG_ARM_LPAE */
+#define PGD_SIZE		(PAGE_SIZE << 2)
 
 /*
  * Since we have only two-level page tables, these are trivial
  */
 #define pmd_alloc_one(mm,addr)		({ BUG(); ((pmd_t *)2); })
 #define pmd_free(mm, pmd)		do { } while (0)
+#ifdef CONFIG_KASAN
+/* The KASan core unconditionally calls pud_populate() on all architectures */
+#define pud_populate(mm,pmd,pte)	do { } while (0)
+#else
 #define pud_populate(mm,pmd,pte)	BUG()
-
+#endif
 #endif	/* CONFIG_ARM_LPAE */
 
 extern pgd_t *pgd_alloc(struct mm_struct *mm);

arch/arm/include/asm/pgtable-2level.h

@@ -177,11 +177,28 @@
  * the pud: the pud entry is never bad, always exists, and can't be set or
  * cleared.
  */
-#define pud_none(pud)		(0)
-#define pud_bad(pud)		(0)
-#define pud_present(pud)	(1)
-#define pud_clear(pudp)		do { } while (0)
-#define set_pud(pud,pudp)	do { } while (0)
+static inline int pud_none(pud_t pud)
+{
+	return 0;
+}
+
+static inline int pud_bad(pud_t pud)
+{
+	return 0;
+}
+
+static inline int pud_present(pud_t pud)
+{
+	return 1;
+}
+
+static inline void pud_clear(pud_t *pudp)
+{
+}
+
+static inline void set_pud(pud_t *pudp, pud_t pud)
+{
+}
 
 static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
 {

arch/arm/include/asm/prom.h

@@ -9,12 +9,12 @@
 
 #ifdef CONFIG_OF
 
-extern const struct machine_desc *setup_machine_fdt(unsigned int dt_phys);
+extern const struct machine_desc *setup_machine_fdt(void *dt_virt);
 extern void __init arm_dt_init_cpu_maps(void);
 
 #else /* CONFIG_OF */
 
-static inline const struct machine_desc *setup_machine_fdt(unsigned int dt_phys)
+static inline const struct machine_desc *setup_machine_fdt(void *dt_virt)
 {
 	return NULL;
 }

arch/arm/include/asm/string.h

@@ -5,6 +5,9 @@
 /*
  * We don't do inline string functions, since the
  * optimised inline asm versions are not small.
+ *
+ * The __underscore versions of some functions are for KASan to be able
+ * to replace them with instrumented versions.
  */
 
 #define __HAVE_ARCH_STRRCHR
@@ -15,15 +18,18 @@ extern char * strchr(const char * s, int c);
 
 #define __HAVE_ARCH_MEMCPY
 extern void * memcpy(void *, const void *, __kernel_size_t);
+extern void *__memcpy(void *dest, const void *src, __kernel_size_t n);
 
 #define __HAVE_ARCH_MEMMOVE
 extern void * memmove(void *, const void *, __kernel_size_t);
+extern void *__memmove(void *dest, const void *src, __kernel_size_t n);
 
 #define __HAVE_ARCH_MEMCHR
 extern void * memchr(const void *, int, __kernel_size_t);
 
 #define __HAVE_ARCH_MEMSET
 extern void * memset(void *, int, __kernel_size_t);
+extern void *__memset(void *s, int c, __kernel_size_t n);
 
 #define __HAVE_ARCH_MEMSET32
 extern void *__memset32(uint32_t *, uint32_t v, __kernel_size_t);
@@ -39,4 +45,24 @@ static inline void *memset64(uint64_t *p, uint64_t v, __kernel_size_t n)
 	return __memset64(p, v, n * 8, v >> 32);
 }
 
+/*
+ * For files that are not instrumented (e.g. mm/slub.c) we
+ * must use non-instrumented versions of the mem*
+ * functions named __memcpy() etc. All such kernel code has
+ * been tagged with KASAN_SANITIZE_file.o = n, which means
+ * that the address sanitization argument isn't passed to the
+ * compiler, and __SANITIZE_ADDRESS__ is not set. As a result
+ * these defines kick in.
+ */
+#if defined(CONFIG_KASAN) && !defined(__SANITIZE_ADDRESS__)
+#define memcpy(dst, src, len) __memcpy(dst, src, len)
+#define memmove(dst, src, len) __memmove(dst, src, len)
+#define memset(s, c, n) __memset(s, c, n)
+
+#ifndef __NO_FORTIFY
+#define __NO_FORTIFY /* FORTIFY_SOURCE uses __builtin_memcpy, etc. */
+#endif
+
+#endif
+
 #endif

arch/arm/include/asm/thread_info.h

@@ -13,7 +13,15 @@
 #include <asm/fpstate.h>
 #include <asm/page.h>
 
+#ifdef CONFIG_KASAN
+/*
+ * KASan uses a lot of extra stack space so the thread size order needs to
+ * be increased.
+ */
+#define THREAD_SIZE_ORDER	2
+#else
 #define THREAD_SIZE_ORDER	1
+#endif
 #define THREAD_SIZE		(PAGE_SIZE << THREAD_SIZE_ORDER)
 #define THREAD_START_SP		(THREAD_SIZE - 8)
 

arch/arm/include/asm/uaccess-asm.h

@@ -85,7 +85,7 @@
 	 */
 	.macro	uaccess_entry, tsk, tmp0, tmp1, tmp2, disable
 	ldr	\tmp1, [\tsk, #TI_ADDR_LIMIT]
-	mov	\tmp2, #TASK_SIZE
+	ldr	\tmp2, =TASK_SIZE
 	str	\tmp2, [\tsk, #TI_ADDR_LIMIT]
  DACR(	mrc	p15, 0, \tmp0, c3, c0, 0)
  DACR(	str	\tmp0, [sp, #SVC_DACR])

arch/arm/kernel/Makefile

@@ -21,6 +21,9 @@ obj-y		:= elf.o entry-common.o irq.o opcodes.o \
 		   setup.o signal.o sigreturn_codes.o \
 		   stacktrace.o sys_arm.o time.o traps.o
 
+KASAN_SANITIZE_stacktrace.o := n
+KASAN_SANITIZE_traps.o := n
+
 ifneq ($(CONFIG_ARM_UNWIND),y)
 obj-$(CONFIG_FRAME_POINTER)	+= return_address.o
 endif

arch/arm/kernel/atags.h

@@ -2,11 +2,11 @@
 void convert_to_tag_list(struct tag *tags);
 
 #ifdef CONFIG_ATAGS
-const struct machine_desc *setup_machine_tags(phys_addr_t __atags_pointer,
+const struct machine_desc *setup_machine_tags(void *__atags_vaddr,
 	unsigned int machine_nr);
 #else
 static inline const struct machine_desc * __init __noreturn
-setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
+setup_machine_tags(void *__atags_vaddr, unsigned int machine_nr)
 {
 	early_print("no ATAGS support: can't continue\n");
 	while (true);

arch/arm/kernel/atags_parse.c

@@ -174,7 +174,7 @@ static void __init squash_mem_tags(struct tag *tag)
 }
 
 const struct machine_desc * __init
-setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
+setup_machine_tags(void *atags_vaddr, unsigned int machine_nr)
 {
 	struct tag *tags = (struct tag *)&default_tags;
 	const struct machine_desc *mdesc = NULL, *p;
@@ -195,8 +195,8 @@ setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
 	if (!mdesc)
 		return NULL;
 
-	if (__atags_pointer)
-		tags = phys_to_virt(__atags_pointer);
+	if (atags_vaddr)
+		tags = atags_vaddr;
 	else if (mdesc->atag_offset)
 		tags = (void *)(PAGE_OFFSET + mdesc->atag_offset);
 

arch/arm/kernel/devtree.c

@@ -203,12 +203,12 @@ static const void * __init arch_get_next_mach(const char *const **match)
 
 /**
  * setup_machine_fdt - Machine setup when an dtb was passed to the kernel
- * @dt_phys: physical address of dt blob
+ * @dt_virt: virtual address of dt blob
  *
  * If a dtb was passed to the kernel in r2, then use it to choose the
  * correct machine_desc and to setup the system.
  */
-const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
+const struct machine_desc * __init setup_machine_fdt(void *dt_virt)
 {
 	const struct machine_desc *mdesc, *mdesc_best = NULL;
 
@@ -221,7 +221,7 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 	mdesc_best = &__mach_desc_GENERIC_DT;
 #endif
 
-	if (!dt_phys || !early_init_dt_verify(phys_to_virt(dt_phys)))
+	if (!dt_virt || !early_init_dt_verify(dt_virt))
 		return NULL;
 
 	mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach);

arch/arm/kernel/entry-armv.S

@@ -252,31 +252,10 @@ __und_svc:
 #else
 	svc_entry
 #endif
-	@
-	@ call emulation code, which returns using r9 if it has emulated
-	@ the instruction, or the more conventional lr if we are to treat
-	@ this as a real undefined instruction
-	@
-	@  r0 - instruction
-	@
-#ifndef CONFIG_THUMB2_KERNEL
-	ldr	r0, [r4, #-4]
-#else
-	mov	r1, #2
-	ldrh	r0, [r4, #-2]			@ Thumb instruction at LR - 2
-	cmp	r0, #0xe800			@ 32-bit instruction if xx >= 0
-	blo	__und_svc_fault
-	ldrh	r9, [r4]			@ bottom 16 bits
-	add	r4, r4, #2
-	str	r4, [sp, #S_PC]
-	orr	r0, r9, r0, lsl #16
-#endif
-	badr	r9, __und_svc_finish
-	mov	r2, r4
-	bl	call_fpe
 
 	mov	r1, #4				@ PC correction to apply
-__und_svc_fault:
+ THUMB(	tst	r5, #PSR_T_BIT		)	@ exception taken in Thumb mode?
+ THUMB(	movne	r1, #2			)	@ if so, fix up PC correction
 	mov	r0, sp				@ struct pt_regs *regs
 	bl	__und_fault
 
@@ -427,7 +406,8 @@ ENDPROC(__fiq_abt)
 	@ if it was interrupted in a critical region.  Here we
 	@ perform a quick test inline since it should be false
 	@ 99.9999% of the time.  The rest is done out of line.
-	cmp	r4, #TASK_SIZE
+	ldr	r0, =TASK_SIZE
+	cmp	r4, r0
 	blhs	kuser_cmpxchg64_fixup
 #endif
 #endif

arch/arm/kernel/entry-common.S

@@ -50,7 +50,8 @@ __ret_fast_syscall:
  UNWIND(.cantunwind	)
 	disable_irq_notrace			@ disable interrupts
 	ldr	r2, [tsk, #TI_ADDR_LIMIT]
-	cmp	r2, #TASK_SIZE
+	ldr	r1, =TASK_SIZE
+	cmp	r2, r1
 	blne	addr_limit_check_failed
 	ldr	r1, [tsk, #TI_FLAGS]		@ re-check for syscall tracing
 	tst	r1, #_TIF_SYSCALL_WORK | _TIF_WORK_MASK
@@ -87,7 +88,8 @@ __ret_fast_syscall:
 #endif
 	disable_irq_notrace			@ disable interrupts
 	ldr	r2, [tsk, #TI_ADDR_LIMIT]
-	cmp	r2, #TASK_SIZE
+	ldr     r1, =TASK_SIZE
+	cmp     r2, r1
 	blne	addr_limit_check_failed
 	ldr	r1, [tsk, #TI_FLAGS]		@ re-check for syscall tracing
 	tst	r1, #_TIF_SYSCALL_WORK | _TIF_WORK_MASK
@@ -128,7 +130,8 @@ ret_slow_syscall:
 	disable_irq_notrace			@ disable interrupts
 ENTRY(ret_to_user_from_irq)
 	ldr	r2, [tsk, #TI_ADDR_LIMIT]
-	cmp	r2, #TASK_SIZE
+	ldr     r1, =TASK_SIZE
+	cmp	r2, r1
 	blne	addr_limit_check_failed
 	ldr	r1, [tsk, #TI_FLAGS]
 	tst	r1, #_TIF_WORK_MASK

arch/arm/kernel/head-common.S

@@ -95,7 +95,7 @@ __mmap_switched:
  THUMB(	ldmia	r4!, {r0, r1, r2, r3} )
  THUMB(	mov	sp, r3 )
 	sub	r2, r2, r1
-	bl	memcpy				@ copy .data to RAM
+	bl	__memcpy			@ copy .data to RAM
 #endif
 
    ARM(	ldmia	r4!, {r0, r1, sp} )
@@ -103,7 +103,7 @@ __mmap_switched:
  THUMB(	mov	sp, r3 )
 	sub	r2, r1, r0
 	mov	r1, #0
-	bl	memset				@ clear .bss
+	bl	__memset			@ clear .bss
 
 	ldmia	r4, {r0, r1, r2, r3}
 	str	r9, [r0]			@ Save processor ID
@@ -111,6 +111,9 @@ __mmap_switched:
 	str	r8, [r2]			@ Save atags pointer
 	cmp	r3, #0
 	strne	r10, [r3]			@ Save control register values
+#ifdef CONFIG_KASAN
+	bl	kasan_early_init
+#endif
 	mov	lr, #0
 	b	start_kernel
 ENDPROC(__mmap_switched)

arch/arm/kernel/head.S

@@ -274,11 +274,10 @@ __create_page_tables:
 	 * We map 2 sections in case the ATAGs/DTB crosses a section boundary.
 	 */
 	mov	r0, r2, lsr #SECTION_SHIFT
-	movs	r0, r0, lsl #SECTION_SHIFT
-	subne	r3, r0, r8
-	addne	r3, r3, #PAGE_OFFSET
-	addne	r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
-	orrne	r6, r7, r0
+	cmp	r2, #0
+	ldrne	r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ORDER)
+	addne	r3, r3, r4
+	orrne	r6, r7, r0, lsl #SECTION_SHIFT
 	strne	r6, [r3], #1 << PMD_ORDER
 	addne	r6, r6, #1 << SECTION_SHIFT
 	strne	r6, [r3]

arch/arm/kernel/hyp-stub.S

@@ -228,12 +228,6 @@ ENTRY(__hyp_soft_restart)
 	ret	lr
 ENDPROC(__hyp_soft_restart)
 
-#ifndef ZIMAGE
-.align 2
-.L__boot_cpu_mode_offset:
-	.long	__boot_cpu_mode - .
-#endif
-
 .align 5
 ENTRY(__hyp_stub_vectors)
 __hyp_stub_reset:	W(b)	.

arch/arm/kernel/iwmmxt.S

@@ -16,6 +16,7 @@
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
 #include <asm/assembler.h>
+#include "iwmmxt.h"
 
 #if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B)
 #define PJ4(code...)		code
@@ -113,33 +114,33 @@ concan_save:
 
 concan_dump:
 
-	wstrw	wCSSF, [r1, #MMX_WCSSF]
-	wstrw	wCASF, [r1, #MMX_WCASF]
-	wstrw	wCGR0, [r1, #MMX_WCGR0]
-	wstrw	wCGR1, [r1, #MMX_WCGR1]
-	wstrw	wCGR2, [r1, #MMX_WCGR2]
-	wstrw	wCGR3, [r1, #MMX_WCGR3]
+	wstrw	wCSSF, r1, MMX_WCSSF
+	wstrw	wCASF, r1, MMX_WCASF
+	wstrw	wCGR0, r1, MMX_WCGR0
+	wstrw	wCGR1, r1, MMX_WCGR1
+	wstrw	wCGR2, r1, MMX_WCGR2
+	wstrw	wCGR3, r1, MMX_WCGR3
 
 1:	@ MUP? wRn
 	tst	r2, #0x2
 	beq	2f
 
-	wstrd	wR0,  [r1, #MMX_WR0]
-	wstrd	wR1,  [r1, #MMX_WR1]
-	wstrd	wR2,  [r1, #MMX_WR2]
-	wstrd	wR3,  [r1, #MMX_WR3]
-	wstrd	wR4,  [r1, #MMX_WR4]
-	wstrd	wR5,  [r1, #MMX_WR5]
-	wstrd	wR6,  [r1, #MMX_WR6]
-	wstrd	wR7,  [r1, #MMX_WR7]
-	wstrd	wR8,  [r1, #MMX_WR8]
-	wstrd	wR9,  [r1, #MMX_WR9]
-	wstrd	wR10, [r1, #MMX_WR10]
-	wstrd	wR11, [r1, #MMX_WR11]
-	wstrd	wR12, [r1, #MMX_WR12]
-	wstrd	wR13, [r1, #MMX_WR13]
-	wstrd	wR14, [r1, #MMX_WR14]
-	wstrd	wR15, [r1, #MMX_WR15]
+	wstrd	wR0,  r1, MMX_WR0
+	wstrd	wR1,  r1, MMX_WR1
+	wstrd	wR2,  r1, MMX_WR2
+	wstrd	wR3,  r1, MMX_WR3
+	wstrd	wR4,  r1, MMX_WR4
+	wstrd	wR5,  r1, MMX_WR5
+	wstrd	wR6,  r1, MMX_WR6
+	wstrd	wR7,  r1, MMX_WR7
+	wstrd	wR8,  r1, MMX_WR8
+	wstrd	wR9,  r1, MMX_WR9
+	wstrd	wR10, r1, MMX_WR10
+	wstrd	wR11, r1, MMX_WR11
+	wstrd	wR12, r1, MMX_WR12
+	wstrd	wR13, r1, MMX_WR13
+	wstrd	wR14, r1, MMX_WR14
+	wstrd	wR15, r1, MMX_WR15
 
 2:	teq	r0, #0				@ anything to load?
 	reteq	lr				@ if not, return
@@ -147,30 +148,30 @@ concan_dump:
 concan_load:
 
 	@ Load wRn
-	wldrd	wR0,  [r0, #MMX_WR0]
-	wldrd	wR1,  [r0, #MMX_WR1]
-	wldrd	wR2,  [r0, #MMX_WR2]
-	wldrd	wR3,  [r0, #MMX_WR3]
-	wldrd	wR4,  [r0, #MMX_WR4]
-	wldrd	wR5,  [r0, #MMX_WR5]
-	wldrd	wR6,  [r0, #MMX_WR6]
-	wldrd	wR7,  [r0, #MMX_WR7]
-	wldrd	wR8,  [r0, #MMX_WR8]
-	wldrd	wR9,  [r0, #MMX_WR9]
-	wldrd	wR10, [r0, #MMX_WR10]
-	wldrd	wR11, [r0, #MMX_WR11]
-	wldrd	wR12, [r0, #MMX_WR12]
-	wldrd	wR13, [r0, #MMX_WR13]
-	wldrd	wR14, [r0, #MMX_WR14]
-	wldrd	wR15, [r0, #MMX_WR15]
+	wldrd	wR0,  r0, MMX_WR0
+	wldrd	wR1,  r0, MMX_WR1
+	wldrd	wR2,  r0, MMX_WR2
+	wldrd	wR3,  r0, MMX_WR3
+	wldrd	wR4,  r0, MMX_WR4
+	wldrd	wR5,  r0, MMX_WR5
+	wldrd	wR6,  r0, MMX_WR6
+	wldrd	wR7,  r0, MMX_WR7
+	wldrd	wR8,  r0, MMX_WR8
+	wldrd	wR9,  r0, MMX_WR9
+	wldrd	wR10, r0, MMX_WR10
+	wldrd	wR11, r0, MMX_WR11
+	wldrd	wR12, r0, MMX_WR12
+	wldrd	wR13, r0, MMX_WR13
+	wldrd	wR14, r0, MMX_WR14
+	wldrd	wR15, r0, MMX_WR15
 
 	@ Load wCx
-	wldrw	wCSSF, [r0, #MMX_WCSSF]
-	wldrw	wCASF, [r0, #MMX_WCASF]
-	wldrw	wCGR0, [r0, #MMX_WCGR0]
-	wldrw	wCGR1, [r0, #MMX_WCGR1]
-	wldrw	wCGR2, [r0, #MMX_WCGR2]
-	wldrw	wCGR3, [r0, #MMX_WCGR3]
+	wldrw	wCSSF, r0, MMX_WCSSF
+	wldrw	wCASF, r0, MMX_WCASF
+	wldrw	wCGR0, r0, MMX_WCGR0
+	wldrw	wCGR1, r0, MMX_WCGR1
+	wldrw	wCGR2, r0, MMX_WCGR2
+	wldrw	wCGR3, r0, MMX_WCGR3
 
 	@ clear CUP/MUP (only if r1 != 0)
 	teq	r1, #0

arch/arm/kernel/iwmmxt.h

+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __IWMMXT_H__
+#define __IWMMXT_H__
+
+.irp b, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+.set .LwR\b, \b
+.set .Lr\b, \b
+.endr
+
+.set .LwCSSF, 0x2
+.set .LwCASF, 0x3
+.set .LwCGR0, 0x8
+.set .LwCGR1, 0x9
+.set .LwCGR2, 0xa
+.set .LwCGR3, 0xb
+
+.macro wldrd, reg:req, base:req, offset:req
+.inst 0xedd00100 | (.L\reg << 12) | (.L\base << 16) | (\offset >> 2)
+.endm
+
+.macro wldrw, reg:req, base:req, offset:req
+.inst 0xfd900100 | (.L\reg << 12) | (.L\base << 16) | (\offset >> 2)
+.endm
+
+.macro wstrd, reg:req, base:req, offset:req
+.inst 0xedc00100 | (.L\reg << 12) | (.L\base << 16) | (\offset >> 2)
+.endm
+
+.macro wstrw, reg:req, base:req, offset:req
+.inst 0xfd800100 | (.L\reg << 12) | (.L\base << 16) | (\offset >> 2)
+.endm
+
+#ifdef __clang__
+
+#define wCon c1
+
+.macro tmrc, dest:req, control:req
+mrc p1, 0, \dest, \control, c0, 0
+.endm
+
+.macro tmcr, control:req, src:req
+mcr p1, 0, \src, \control, c0, 0
+.endm
+#endif
+
+#endif

arch/arm/kernel/setup.c

@@ -18,6 +18,7 @@
 #include <linux/of_platform.h>
 #include <linux/init.h>
 #include <linux/kexec.h>
+#include <linux/libfdt.h>
 #include <linux/of_fdt.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
@@ -58,6 +59,7 @@
 #include <asm/unwind.h>
 #include <asm/memblock.h>
 #include <asm/virt.h>
+#include <asm/kasan.h>
 
 #include "atags.h"
 
@@ -763,7 +765,7 @@ int __init arm_add_memory(u64 start, u64 size)
 #ifndef CONFIG_PHYS_ADDR_T_64BIT
 	if (aligned_start > ULONG_MAX) {
 		pr_crit("Ignoring memory at 0x%08llx outside 32-bit physical address space\n",
-			(long long)start);
+			start);
 		return -EINVAL;
 	}
 
@@ -1081,19 +1083,27 @@ void __init hyp_mode_check(void)
 
 void __init setup_arch(char **cmdline_p)
 {
-	const struct machine_desc *mdesc;
+	const struct machine_desc *mdesc = NULL;
+	void *atags_vaddr = NULL;
+
+	if (__atags_pointer)
+		atags_vaddr = FDT_VIRT_BASE(__atags_pointer);
 
 	setup_processor();
-	mdesc = setup_machine_fdt(__atags_pointer);
+	if (atags_vaddr) {
+		mdesc = setup_machine_fdt(atags_vaddr);
+		if (mdesc)
+			memblock_reserve(__atags_pointer,
+					 fdt_totalsize(atags_vaddr));
+	}
 	if (!mdesc)
-		mdesc = setup_machine_tags(__atags_pointer, __machine_arch_type);
+		mdesc = setup_machine_tags(atags_vaddr, __machine_arch_type);
 	if (!mdesc) {
 		early_print("\nError: invalid dtb and unrecognized/unsupported machine ID\n");
 		early_print("  r1=0x%08x, r2=0x%08x\n", __machine_arch_type,
 			    __atags_pointer);
 		if (__atags_pointer)
-			early_print("  r2[]=%*ph\n", 16,
-				    phys_to_virt(__atags_pointer));
+			early_print("  r2[]=%*ph\n", 16, atags_vaddr);
 		dump_machine_table();
 	}
 
@@ -1126,7 +1136,7 @@ void __init setup_arch(char **cmdline_p)
 	efi_init();
 	/*
 	 * Make sure the calculation for lowmem/highmem is set appropriately
-	 * before reserving/allocating any mmeory
+	 * before reserving/allocating any memory
 	 */
 	adjust_lowmem_bounds();
 	arm_memblock_init(mdesc);
@@ -1136,6 +1146,7 @@ void __init setup_arch(char **cmdline_p)
 	early_ioremap_reset();
 
 	paging_init(mdesc);
+	kasan_init();
 	request_standard_resources(mdesc);
 
 	if (mdesc->restart)

arch/arm/kernel/smp.c

@@ -524,14 +524,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 }
 
 static const char *ipi_types[NR_IPI] __tracepoint_string = {
-#define S(x,s)	[x] = s
-	S(IPI_WAKEUP, "CPU wakeup interrupts"),
-	S(IPI_TIMER, "Timer broadcast interrupts"),
-	S(IPI_RESCHEDULE, "Rescheduling interrupts"),
-	S(IPI_CALL_FUNC, "Function call interrupts"),
-	S(IPI_CPU_STOP, "CPU stop interrupts"),
-	S(IPI_IRQ_WORK, "IRQ work interrupts"),
-	S(IPI_COMPLETION, "completion interrupts"),
+	[IPI_WAKEUP]		= "CPU wakeup interrupts",
+	[IPI_TIMER]		= "Timer broadcast interrupts",
+	[IPI_RESCHEDULE]	= "Rescheduling interrupts",
+	[IPI_CALL_FUNC]		= "Function call interrupts",
+	[IPI_CPU_STOP]		= "CPU stop interrupts",
+	[IPI_IRQ_WORK]		= "IRQ work interrupts",
+	[IPI_COMPLETION]	= "completion interrupts",
 };
 
 static void smp_cross_call(const struct cpumask *target, unsigned int ipinr);

arch/arm/kernel/unwind.c

@@ -18,9 +18,6 @@
 #warning Your compiler does not have EABI support.
 #warning    ARM unwind is known to compile only with EABI compilers.
 #warning    Change compiler or disable ARM_UNWIND option.
-#elif (__GNUC__ == 4 && __GNUC_MINOR__ <= 2) && !defined(__clang__)
-#warning Your compiler is too buggy; it is known to not compile ARM unwind support.
-#warning    Change compiler or disable ARM_UNWIND option.
 #endif
 #endif /* __CHECKER__ */
 
@@ -236,7 +233,11 @@ static int unwind_pop_register(struct unwind_ctrl_block *ctrl,
 		if (*vsp >= (unsigned long *)ctrl->sp_high)
 			return -URC_FAILURE;
 
-	ctrl->vrs[reg] = *(*vsp)++;
+	/* Use READ_ONCE_NOCHECK here to avoid this memory access
+	 * from being tracked by KASAN.
+	 */
+	ctrl->vrs[reg] = READ_ONCE_NOCHECK(*(*vsp));
+	(*vsp)++;
 	return URC_OK;
 }
 

arch/arm/lib/memcpy.S

@@ -58,10 +58,12 @@
 
 /* Prototype: void *memcpy(void *dest, const void *src, size_t n); */
 
+ENTRY(__memcpy)
 ENTRY(mmiocpy)
-ENTRY(memcpy)
+WEAK(memcpy)
 
 #include "copy_template.S"
 
 ENDPROC(memcpy)
 ENDPROC(mmiocpy)
+ENDPROC(__memcpy)

arch/arm/lib/memmove.S

@@ -24,12 +24,13 @@
  * occurring in the opposite direction.
  */
 
-ENTRY(memmove)
+ENTRY(__memmove)
+WEAK(memmove)
 	UNWIND(	.fnstart			)
 
 		subs	ip, r0, r1
 		cmphi	r2, ip
-		bls	memcpy
+		bls	__memcpy
 
 		stmfd	sp!, {r0, r4, lr}
 	UNWIND(	.fnend				)
@@ -222,3 +223,4 @@ ENTRY(memmove)
 18:		backward_copy_shift	push=24	pull=8
 
 ENDPROC(memmove)
+ENDPROC(__memmove)

arch/arm/lib/memset.S

@@ -13,8 +13,9 @@
 	.text
 	.align	5
 
+ENTRY(__memset)
 ENTRY(mmioset)
-ENTRY(memset)
+WEAK(memset)
 UNWIND( .fnstart         )
 	ands	r3, r0, #3		@ 1 unaligned?
 	mov	ip, r0			@ preserve r0 as return value
@@ -132,6 +133,7 @@ UNWIND( .fnstart            )
 UNWIND( .fnend   )
 ENDPROC(memset)
 ENDPROC(mmioset)
+ENDPROC(__memset)
 
 ENTRY(__memset32)
 UNWIND( .fnstart         )

arch/arm/mm/Kconfig

@@ -743,6 +743,7 @@ config SWP_EMULATE
 config CPU_BIG_ENDIAN
 	bool "Build big-endian kernel"
 	depends on ARCH_SUPPORTS_BIG_ENDIAN
+	depends on !LD_IS_LLD
 	help
 	  Say Y if you plan on running a kernel in big-endian mode.
 	  Note that your board must be properly built and your board

arch/arm/mm/Makefile

@@ -7,6 +7,7 @@ obj-y				:= extable.o fault.o init.o iomap.o
 obj-y				+= dma-mapping$(MMUEXT).o
 obj-$(CONFIG_MMU)		+= fault-armv.o flush.o idmap.o ioremap.o \
 				   mmap.o pgd.o mmu.o pageattr.o
+KASAN_SANITIZE_mmu.o		:= n
 
 ifneq ($(CONFIG_MMU),y)
 obj-y				+= nommu.o
@@ -16,6 +17,7 @@ endif
 obj-$(CONFIG_ARM_PTDUMP_CORE)	+= dump.o
 obj-$(CONFIG_ARM_PTDUMP_DEBUGFS)	+= ptdump_debugfs.o
 obj-$(CONFIG_MODULES)		+= proc-syms.o
+KASAN_SANITIZE_physaddr.o	:= n
 obj-$(CONFIG_DEBUG_VIRTUAL)	+= physaddr.o
 
 obj-$(CONFIG_ALIGNMENT_TRAP)	+= alignment.o
@@ -111,3 +113,6 @@ obj-$(CONFIG_CACHE_L2X0_PMU)	+= cache-l2x0-pmu.o
 obj-$(CONFIG_CACHE_XSC3L2)	+= cache-xsc3l2.o
 obj-$(CONFIG_CACHE_TAUROS2)	+= cache-tauros2.o
 obj-$(CONFIG_CACHE_UNIPHIER)	+= cache-uniphier.o
+
+KASAN_SANITIZE_kasan_init.o	:= n
+obj-$(CONFIG_KASAN)		+= kasan_init.o

arch/arm/mm/init.c

@@ -223,7 +223,6 @@ void __init arm_memblock_init(const struct machine_desc *mdesc)
 	if (mdesc->reserve)
 		mdesc->reserve();
 
-	early_init_fdt_reserve_self();
 	early_init_fdt_scan_reserved_mem();
 
 	/* reserve memory for DMA contiguous allocations */

arch/arm/mm/kasan_init.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * This file contains kasan initialization code for ARM.
+ *
+ * Copyright (c) 2018 Samsung Electronics Co., Ltd.
+ * Author: Andrey Ryabinin <ryabinin.a.a@gmail.com>
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#define pr_fmt(fmt) "kasan: " fmt
+#include <linux/kasan.h>
+#include <linux/kernel.h>
+#include <linux/memblock.h>
+#include <linux/sched/task.h>
+#include <linux/start_kernel.h>
+#include <linux/pgtable.h>
+#include <asm/cputype.h>
+#include <asm/highmem.h>
+#include <asm/mach/map.h>
+#include <asm/memory.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/procinfo.h>
+#include <asm/proc-fns.h>
+
+#include "mm.h"
+
+static pgd_t tmp_pgd_table[PTRS_PER_PGD] __initdata __aligned(PGD_SIZE);
+
+pmd_t tmp_pmd_table[PTRS_PER_PMD] __page_aligned_bss;
+
+static __init void *kasan_alloc_block(size_t size)
+{
+	return memblock_alloc_try_nid(size, size, __pa(MAX_DMA_ADDRESS),
+				      MEMBLOCK_ALLOC_KASAN, NUMA_NO_NODE);
+}
+
+static void __init kasan_pte_populate(pmd_t *pmdp, unsigned long addr,
+				      unsigned long end, bool early)
+{
+	unsigned long next;
+	pte_t *ptep = pte_offset_kernel(pmdp, addr);
+
+	do {
+		pte_t entry;
+		void *p;
+
+		next = addr + PAGE_SIZE;
+
+		if (!early) {
+			if (!pte_none(READ_ONCE(*ptep)))
+				continue;
+
+			p = kasan_alloc_block(PAGE_SIZE);
+			if (!p) {
+				panic("%s failed to allocate shadow page for address 0x%lx\n",
+				      __func__, addr);
+				return;
+			}
+			memset(p, KASAN_SHADOW_INIT, PAGE_SIZE);
+			entry = pfn_pte(virt_to_pfn(p),
+					__pgprot(pgprot_val(PAGE_KERNEL)));
+		} else if (pte_none(READ_ONCE(*ptep))) {
+			/*
+			 * The early shadow memory is mapping all KASan
+			 * operations to one and the same page in memory,
+			 * "kasan_early_shadow_page" so that the instrumentation
+			 * will work on a scratch area until we can set up the
+			 * proper KASan shadow memory.
+			 */
+			entry = pfn_pte(virt_to_pfn(kasan_early_shadow_page),
+					__pgprot(_L_PTE_DEFAULT | L_PTE_DIRTY | L_PTE_XN));
+		} else {
+			/*
+			 * Early shadow mappings are PMD_SIZE aligned, so if the
+			 * first entry is already set, they must all be set.
+			 */
+			return;
+		}
+
+		set_pte_at(&init_mm, addr, ptep, entry);
+	} while (ptep++, addr = next, addr != end);
+}
+
+/*
+ * The pmd (page middle directory) is only used on LPAE
+ */
+static void __init kasan_pmd_populate(pud_t *pudp, unsigned long addr,
+				      unsigned long end, bool early)
+{
+	unsigned long next;
+	pmd_t *pmdp = pmd_offset(pudp, addr);
+
+	do {
+		if (pmd_none(*pmdp)) {
+			/*
+			 * We attempt to allocate a shadow block for the PMDs
+			 * used by the PTEs for this address if it isn't already
+			 * allocated.
+			 */
+			void *p = early ? kasan_early_shadow_pte :
+				kasan_alloc_block(PAGE_SIZE);
+
+			if (!p) {
+				panic("%s failed to allocate shadow block for address 0x%lx\n",
+				      __func__, addr);
+				return;
+			}
+			pmd_populate_kernel(&init_mm, pmdp, p);
+			flush_pmd_entry(pmdp);
+		}
+
+		next = pmd_addr_end(addr, end);
+		kasan_pte_populate(pmdp, addr, next, early);
+	} while (pmdp++, addr = next, addr != end);
+}
+
+static void __init kasan_pgd_populate(unsigned long addr, unsigned long end,
+				      bool early)
+{
+	unsigned long next;
+	pgd_t *pgdp;
+	p4d_t *p4dp;
+	pud_t *pudp;
+
+	pgdp = pgd_offset_k(addr);
+
+	do {
+		/*
+		 * Allocate and populate the shadow block of p4d folded into
+		 * pud folded into pmd if it doesn't already exist
+		 */
+		if (!early && pgd_none(*pgdp)) {
+			void *p = kasan_alloc_block(PAGE_SIZE);
+
+			if (!p) {
+				panic("%s failed to allocate shadow block for address 0x%lx\n",
+				      __func__, addr);
+				return;
+			}
+			pgd_populate(&init_mm, pgdp, p);
+		}
+
+		next = pgd_addr_end(addr, end);
+		/*
+		 * We just immediately jump over the p4d and pud page
+		 * directories since we believe ARM32 will never gain four
+		 * nor five level page tables.
+		 */
+		p4dp = p4d_offset(pgdp, addr);
+		pudp = pud_offset(p4dp, addr);
+
+		kasan_pmd_populate(pudp, addr, next, early);
+	} while (pgdp++, addr = next, addr != end);
+}
+
+extern struct proc_info_list *lookup_processor_type(unsigned int);
+
+void __init kasan_early_init(void)
+{
+	struct proc_info_list *list;
+
+	/*
+	 * locate processor in the list of supported processor
+	 * types.  The linker builds this table for us from the
+	 * entries in arch/arm/mm/proc-*.S
+	 */
+	list = lookup_processor_type(read_cpuid_id());
+	if (list) {
+#ifdef MULTI_CPU
+		processor = *list->proc;
+#endif
+	}
+
+	BUILD_BUG_ON((KASAN_SHADOW_END - (1UL << 29)) != KASAN_SHADOW_OFFSET);
+	/*
+	 * We walk the page table and set all of the shadow memory to point
+	 * to the scratch page.
+	 */
+	kasan_pgd_populate(KASAN_SHADOW_START, KASAN_SHADOW_END, true);
+}
+
+static void __init clear_pgds(unsigned long start,
+			unsigned long end)
+{
+	for (; start && start < end; start += PMD_SIZE)
+		pmd_clear(pmd_off_k(start));
+}
+
+static int __init create_mapping(void *start, void *end)
+{
+	void *shadow_start, *shadow_end;
+
+	shadow_start = kasan_mem_to_shadow(start);
+	shadow_end = kasan_mem_to_shadow(end);
+
+	pr_info("Mapping kernel virtual memory block: %px-%px at shadow: %px-%px\n",
+		start, end, shadow_start, shadow_end);
+
+	kasan_pgd_populate((unsigned long)shadow_start & PAGE_MASK,
+			   PAGE_ALIGN((unsigned long)shadow_end), false);
+	return 0;
+}
+
+void __init kasan_init(void)
+{
+	phys_addr_t pa_start, pa_end;
+	u64 i;
+
+	/*
+	 * We are going to perform proper setup of shadow memory.
+	 *
+	 * At first we should unmap early shadow (clear_pgds() call bellow).
+	 * However, instrumented code can't execute without shadow memory.
+	 *
+	 * To keep the early shadow memory MMU tables around while setting up
+	 * the proper shadow memory, we copy swapper_pg_dir (the initial page
+	 * table) to tmp_pgd_table and use that to keep the early shadow memory
+	 * mapped until the full shadow setup is finished. Then we swap back
+	 * to the proper swapper_pg_dir.
+	 */
+
+	memcpy(tmp_pgd_table, swapper_pg_dir, sizeof(tmp_pgd_table));
+#ifdef CONFIG_ARM_LPAE
+	/* We need to be in the same PGD or this won't work */
+	BUILD_BUG_ON(pgd_index(KASAN_SHADOW_START) !=
+		     pgd_index(KASAN_SHADOW_END));
+	memcpy(tmp_pmd_table,
+	       pgd_page_vaddr(*pgd_offset_k(KASAN_SHADOW_START)),
+	       sizeof(tmp_pmd_table));
+	set_pgd(&tmp_pgd_table[pgd_index(KASAN_SHADOW_START)],
+		__pgd(__pa(tmp_pmd_table) | PMD_TYPE_TABLE | L_PGD_SWAPPER));
+#endif
+	cpu_switch_mm(tmp_pgd_table, &init_mm);
+	local_flush_tlb_all();
+
+	clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END);
+
+	kasan_populate_early_shadow(kasan_mem_to_shadow((void *)VMALLOC_START),
+				    kasan_mem_to_shadow((void *)-1UL) + 1);
+
+	for_each_mem_range(i, &pa_start, &pa_end) {
+		void *start = __va(pa_start);
+		void *end = __va(pa_end);
+
+		/* Do not attempt to shadow highmem */
+		if (pa_start >= arm_lowmem_limit) {
+			pr_info("Skip highmem block at %pa-%pa\n", &pa_start, &pa_end);
+			continue;
+		}
+		if (pa_end > arm_lowmem_limit) {
+			pr_info("Truncating shadow for memory block at %pa-%pa to lowmem region at %pa\n",
+				&pa_start, &pa_end, &arm_lowmem_limit);
+			end = __va(arm_lowmem_limit);
+		}
+		if (start >= end) {
+			pr_info("Skipping invalid memory block %pa-%pa (virtual %p-%p)\n",
+				&pa_start, &pa_end, start, end);
+			continue;
+		}
+
+		create_mapping(start, end);
+	}
+
+	/*
+	 * 1. The module global variables are in MODULES_VADDR ~ MODULES_END,
+	 *    so we need to map this area.
+	 * 2. PKMAP_BASE ~ PKMAP_BASE+PMD_SIZE's shadow and MODULES_VADDR
+	 *    ~ MODULES_END's shadow is in the same PMD_SIZE, so we can't
+	 *    use kasan_populate_zero_shadow.
+	 */
+	create_mapping((void *)MODULES_VADDR, (void *)(PKMAP_BASE + PMD_SIZE));
+
+	/*
+	 * KAsan may reuse the contents of kasan_early_shadow_pte directly, so
+	 * we should make sure that it maps the zero page read-only.
+	 */
+	for (i = 0; i < PTRS_PER_PTE; i++)
+		set_pte_at(&init_mm, KASAN_SHADOW_START + i*PAGE_SIZE,
+			   &kasan_early_shadow_pte[i],
+			   pfn_pte(virt_to_pfn(kasan_early_shadow_page),
+				__pgprot(pgprot_val(PAGE_KERNEL)
+					 | L_PTE_RDONLY)));
+
+	cpu_switch_mm(swapper_pg_dir, &init_mm);
+	local_flush_tlb_all();
+
+	memset(kasan_early_shadow_page, 0, PAGE_SIZE);
+	pr_info("Kernel address sanitizer initialized\n");
+	init_task.kasan_depth = 0;
+}

arch/arm/mm/mmu.c

@@ -29,6 +29,7 @@
 #include <asm/procinfo.h>
 #include <asm/memory.h>
 #include <asm/pgalloc.h>
+#include <asm/kasan_def.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -39,6 +40,8 @@
 #include "mm.h"
 #include "tcm.h"
 
+extern unsigned long __atags_pointer;
+
 /*
  * empty_zero_page is a special page that is used for
  * zero-initialized data and COW.
@@ -946,7 +949,7 @@ static void __init create_mapping(struct map_desc *md)
 		return;
 	}
 
-	if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
+	if (md->type == MT_DEVICE &&
 	    md->virtual >= PAGE_OFFSET && md->virtual < FIXADDR_START &&
 	    (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
 		pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n",
@@ -1253,8 +1256,25 @@ static inline void prepare_page_table(void)
 	/*
 	 * Clear out all the mappings below the kernel image.
 	 */
+#ifdef CONFIG_KASAN
+	/*
+	 * KASan's shadow memory inserts itself between the TASK_SIZE
+	 * and MODULES_VADDR. Do not clear the KASan shadow memory mappings.
+	 */
+	for (addr = 0; addr < KASAN_SHADOW_START; addr += PMD_SIZE)
+		pmd_clear(pmd_off_k(addr));
+	/*
+	 * Skip over the KASan shadow area. KASAN_SHADOW_END is sometimes
+	 * equal to MODULES_VADDR and then we exit the pmd clearing. If we
+	 * are using a thumb-compiled kernel, there there will be 8MB more
+	 * to clear as KASan always offset to 16 MB below MODULES_VADDR.
+	 */
+	for (addr = KASAN_SHADOW_END; addr < MODULES_VADDR; addr += PMD_SIZE)
+		pmd_clear(pmd_off_k(addr));
+#else
 	for (addr = 0; addr < MODULES_VADDR; addr += PMD_SIZE)
 		pmd_clear(pmd_off_k(addr));
+#endif
 
 #ifdef CONFIG_XIP_KERNEL
 	/* The XIP kernel is mapped in the module area -- skip over it */
@@ -1333,6 +1353,15 @@ static void __init devicemaps_init(const struct machine_desc *mdesc)
 	for (addr = VMALLOC_START; addr < (FIXADDR_TOP & PMD_MASK); addr += PMD_SIZE)
 		pmd_clear(pmd_off_k(addr));
 
+	if (__atags_pointer) {
+		/* create a read-only mapping of the device tree */
+		map.pfn = __phys_to_pfn(__atags_pointer & SECTION_MASK);
+		map.virtual = FDT_FIXED_BASE;
+		map.length = FDT_FIXED_SIZE;
+		map.type = MT_ROM;
+		create_mapping(&map);
+	}
+
 	/*
 	 * Map the kernel if it is XIP.
 	 * It is always first in the modulearea.
@@ -1489,8 +1518,7 @@ static void __init map_lowmem(void)
 }
 
 #ifdef CONFIG_ARM_PV_FIXUP
-extern unsigned long __atags_pointer;
-typedef void pgtables_remap(long long offset, unsigned long pgd, void *bdata);
+typedef void pgtables_remap(long long offset, unsigned long pgd);
 pgtables_remap lpae_pgtables_remap_asm;
 
 /*
@@ -1503,7 +1531,6 @@ static void __init early_paging_init(const struct machine_desc *mdesc)
 	unsigned long pa_pgd;
 	unsigned int cr, ttbcr;
 	long long offset;
-	void *boot_data;
 
 	if (!mdesc->pv_fixup)
 		return;
@@ -1520,7 +1547,6 @@ static void __init early_paging_init(const struct machine_desc *mdesc)
 	 */
 	lpae_pgtables_remap = (pgtables_remap *)(unsigned long)__pa(lpae_pgtables_remap_asm);
 	pa_pgd = __pa(swapper_pg_dir);
-	boot_data = __va(__atags_pointer);
 	barrier();
 
 	pr_info("Switching physical address space to 0x%08llx\n",
@@ -1556,7 +1582,7 @@ static void __init early_paging_init(const struct machine_desc *mdesc)
 	 * needs to be assembly.  It's fairly simple, as we're using the
 	 * temporary tables setup by the initial assembly code.
 	 */
-	lpae_pgtables_remap(offset, pa_pgd, boot_data);
+	lpae_pgtables_remap(offset, pa_pgd);
 
 	/* Re-enable the caches and cacheable TLB walks */
 	asm volatile("mcr p15, 0, %0, c2, c0, 2" : : "r" (ttbcr));

arch/arm/mm/pgd.c

@@ -66,7 +66,21 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 	new_pmd = pmd_alloc(mm, new_pud, 0);
 	if (!new_pmd)
 		goto no_pmd;
-#endif
+#ifdef CONFIG_KASAN
+	/*
+	 * Copy PMD table for KASAN shadow mappings.
+	 */
+	init_pgd = pgd_offset_k(TASK_SIZE);
+	init_p4d = p4d_offset(init_pgd, TASK_SIZE);
+	init_pud = pud_offset(init_p4d, TASK_SIZE);
+	init_pmd = pmd_offset(init_pud, TASK_SIZE);
+	new_pmd = pmd_offset(new_pud, TASK_SIZE);
+	memcpy(new_pmd, init_pmd,
+	       (pmd_index(MODULES_VADDR) - pmd_index(TASK_SIZE))
+	       * sizeof(pmd_t));
+	clean_dcache_area(new_pmd, PTRS_PER_PMD * sizeof(pmd_t));
+#endif /* CONFIG_KASAN */
+#endif /* CONFIG_LPAE */
 
 	if (!vectors_high()) {
 		/*

arch/arm/mm/pv-fixup-asm.S

@@ -39,8 +39,8 @@ ENTRY(lpae_pgtables_remap_asm)
 
 	/* Update level 2 entries for the boot data */
 	add	r7, r2, #0x1000
-	add	r7, r7, r3, lsr #SECTION_SHIFT - L2_ORDER
-	bic	r7, r7, #(1 << L2_ORDER) - 1
+	movw	r3, #FDT_FIXED_BASE >> (SECTION_SHIFT - L2_ORDER)
+	add	r7, r7, r3
 	ldrd	r4, r5, [r7]
 	adds	r4, r4, r0
 	adc	r5, r5, r1

arch/arm/vdso/Makefile

@@ -42,6 +42,8 @@ GCOV_PROFILE := n
 # Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
 KCOV_INSTRUMENT := n
 
+KASAN_SANITIZE := n
+
 # Force dependency
 $(obj)/vdso.o : $(obj)/vdso.so
 

arch/arm/vfp/entry.S

@@ -37,20 +37,3 @@ ENDPROC(vfp_null_entry)
 	.align	2
 .LCvfp:
 	.word	vfp_vector
-
-@ This code is called if the VFP does not exist. It needs to flag the
-@ failure to the VFP initialisation code.
-
-	__INIT
-ENTRY(vfp_testing_entry)
-	dec_preempt_count_ti r10, r4
-	ldr	r0, VFP_arch_address
-	str	r0, [r0]		@ set to non-zero value
-	ret	r9			@ we have handled the fault
-ENDPROC(vfp_testing_entry)
-
-	.align	2
-VFP_arch_address:
-	.word	VFP_arch
-
-	__FINIT

arch/arm/vfp/vfphw.S

@@ -79,11 +79,6 @@ ENTRY(vfp_support_entry)
 	DBGSTR3	"instr %08x pc %08x state %p", r0, r2, r10
 
 	.fpu	vfpv2
-	ldr	r3, [sp, #S_PSR]	@ Neither lazy restore nor FP exceptions
-	and	r3, r3, #MODE_MASK	@ are supported in kernel mode
-	teq	r3, #USR_MODE
-	bne	vfp_kmode_exception	@ Returns through lr
-
 	VFPFMRX	r1, FPEXC		@ Is the VFP enabled?
 	DBGSTR1	"fpexc %08x", r1
 	tst	r1, #FPEXC_EN

arch/arm/vfp/vfpmodule.c

@@ -23,6 +23,7 @@
 #include <asm/cputype.h>
 #include <asm/system_info.h>
 #include <asm/thread_notify.h>
+#include <asm/traps.h>
 #include <asm/vfp.h>
 
 #include "vfpinstr.h"
@@ -31,7 +32,6 @@
 /*
  * Our undef handlers (in entry.S)
  */
-asmlinkage void vfp_testing_entry(void);
 asmlinkage void vfp_support_entry(void);
 asmlinkage void vfp_null_entry(void);
 
@@ -42,7 +42,7 @@ asmlinkage void (*vfp_vector)(void) = vfp_null_entry;
  * Used in startup: set to non-zero if VFP checks fail
  * After startup, holds VFP architecture
  */
-unsigned int VFP_arch;
+static unsigned int __initdata VFP_arch;
 
 /*
  * The pointer to the vfpstate structure of the thread which currently
@@ -436,7 +436,7 @@ static void vfp_enable(void *unused)
  * present on all CPUs within a SMP complex. Needs to be called prior to
  * vfp_init().
  */
-void vfp_disable(void)
+void __init vfp_disable(void)
 {
 	if (VFP_arch) {
 		pr_debug("%s: should be called prior to vfp_init\n", __func__);
@@ -642,7 +642,9 @@ static int vfp_starting_cpu(unsigned int unused)
 	return 0;
 }
 
-void vfp_kmode_exception(void)
+#ifdef CONFIG_KERNEL_MODE_NEON
+
+static int vfp_kmode_exception(struct pt_regs *regs, unsigned int instr)
 {
 	/*
 	 * If we reach this point, a floating point exception has been raised
@@ -660,9 +662,51 @@ void vfp_kmode_exception(void)
 		pr_crit("BUG: unsupported FP instruction in kernel mode\n");
 	else
 		pr_crit("BUG: FP instruction issued in kernel mode with FP unit disabled\n");
+	pr_crit("FPEXC == 0x%08x\n", fmrx(FPEXC));
+	return 1;
 }
 
-#ifdef CONFIG_KERNEL_MODE_NEON
+static struct undef_hook vfp_kmode_exception_hook[] = {{
+	.instr_mask	= 0xfe000000,
+	.instr_val	= 0xf2000000,
+	.cpsr_mask	= MODE_MASK | PSR_T_BIT,
+	.cpsr_val	= SVC_MODE,
+	.fn		= vfp_kmode_exception,
+}, {
+	.instr_mask	= 0xff100000,
+	.instr_val	= 0xf4000000,
+	.cpsr_mask	= MODE_MASK | PSR_T_BIT,
+	.cpsr_val	= SVC_MODE,
+	.fn		= vfp_kmode_exception,
+}, {
+	.instr_mask	= 0xef000000,
+	.instr_val	= 0xef000000,
+	.cpsr_mask	= MODE_MASK | PSR_T_BIT,
+	.cpsr_val	= SVC_MODE | PSR_T_BIT,
+	.fn		= vfp_kmode_exception,
+}, {
+	.instr_mask	= 0xff100000,
+	.instr_val	= 0xf9000000,
+	.cpsr_mask	= MODE_MASK | PSR_T_BIT,
+	.cpsr_val	= SVC_MODE | PSR_T_BIT,
+	.fn		= vfp_kmode_exception,
+}, {
+	.instr_mask	= 0x0c000e00,
+	.instr_val	= 0x0c000a00,
+	.cpsr_mask	= MODE_MASK,
+	.cpsr_val	= SVC_MODE,
+	.fn		= vfp_kmode_exception,
+}};
+
+static int __init vfp_kmode_exception_hook_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(vfp_kmode_exception_hook); i++)
+		register_undef_hook(&vfp_kmode_exception_hook[i]);
+	return 0;
+}
+subsys_initcall(vfp_kmode_exception_hook_init);
 
 /*
  * Kernel-side NEON support functions
@@ -708,6 +752,21 @@ EXPORT_SYMBOL(kernel_neon_end);
 
 #endif /* CONFIG_KERNEL_MODE_NEON */
 
+static int __init vfp_detect(struct pt_regs *regs, unsigned int instr)
+{
+	VFP_arch = UINT_MAX;	/* mark as not present */
+	regs->ARM_pc += 4;
+	return 0;
+}
+
+static struct undef_hook vfp_detect_hook __initdata = {
+	.instr_mask	= 0x0c000e00,
+	.instr_val	= 0x0c000a00,
+	.cpsr_mask	= MODE_MASK,
+	.cpsr_val	= SVC_MODE,
+	.fn		= vfp_detect,
+};
+
 /*
  * VFP support code initialisation.
  */
@@ -728,10 +787,11 @@ static int __init vfp_init(void)
 	 * The handler is already setup to just log calls, so
 	 * we just need to read the VFPSID register.
 	 */
-	vfp_vector = vfp_testing_entry;
+	register_undef_hook(&vfp_detect_hook);
 	barrier();
 	vfpsid = fmrx(FPSID);
 	barrier();
+	unregister_undef_hook(&vfp_detect_hook);
 	vfp_vector = vfp_null_entry;
 
 	pr_info("VFP support v0.3: ");