staging: r8188eu: introduce new hal dir for RTL8188eu driver

This patchset is split in order to keep the file sizes down. This hal
directory is part of the newer/better driver from GitHub modified by
Larry Finger. Import this as the basis for all future work going
forward.
Suggested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210727232219.2948-3-phil@philpotter.co.ukSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/r8188eu/hal/Hal8188EPwrSeq.c

+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#include "Hal8188EPwrSeq.h"
+#include <rtl8188e_hal.h>
+
+/*
+    drivers should parse below arrays and do the corresponding actions
+*/
+/* 3 Power on  Array */
+struct wl_pwr_cfg rtl8188E_power_on_flow[RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS + RTL8188E_TRANS_END_STEPS] = {
+	RTL8188E_TRANS_CARDEMU_TO_ACT
+	RTL8188E_TRANS_END
+};
+
+/* 3Radio off Array */
+struct wl_pwr_cfg rtl8188E_radio_off_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_END_STEPS] = {
+	RTL8188E_TRANS_ACT_TO_CARDEMU
+	RTL8188E_TRANS_END
+};
+
+/* 3Card Disable Array */
+struct wl_pwr_cfg rtl8188E_card_disable_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + RTL8188E_TRANS_END_STEPS] = {
+	RTL8188E_TRANS_ACT_TO_CARDEMU
+	RTL8188E_TRANS_CARDEMU_TO_CARDDIS
+	RTL8188E_TRANS_END
+};
+
+/* 3 Card Enable Array */
+struct wl_pwr_cfg rtl8188E_card_enable_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + RTL8188E_TRANS_END_STEPS] = {
+	RTL8188E_TRANS_CARDDIS_TO_CARDEMU
+	RTL8188E_TRANS_CARDEMU_TO_ACT
+	RTL8188E_TRANS_END
+};
+
+/* 3Suspend Array */
+struct wl_pwr_cfg rtl8188E_suspend_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS + RTL8188E_TRANS_END_STEPS] = {
+	RTL8188E_TRANS_ACT_TO_CARDEMU
+	RTL8188E_TRANS_CARDEMU_TO_SUS
+	RTL8188E_TRANS_END
+};
+
+/* 3 Resume Array */
+struct wl_pwr_cfg rtl8188E_resume_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS + RTL8188E_TRANS_END_STEPS] = {
+	RTL8188E_TRANS_SUS_TO_CARDEMU
+	RTL8188E_TRANS_CARDEMU_TO_ACT
+	RTL8188E_TRANS_END
+};
+
+/* 3HWPDN Array */
+struct wl_pwr_cfg rtl8188E_hwpdn_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + RTL8188E_TRANS_END_STEPS] = {
+	RTL8188E_TRANS_ACT_TO_CARDEMU
+	RTL8188E_TRANS_CARDEMU_TO_PDN
+	RTL8188E_TRANS_END
+};
+
+/* 3 Enter LPS */
+struct wl_pwr_cfg rtl8188E_enter_lps_flow[RTL8188E_TRANS_ACT_TO_LPS_STEPS + RTL8188E_TRANS_END_STEPS] = {
+	/* FW behavior */
+	RTL8188E_TRANS_ACT_TO_LPS
+	RTL8188E_TRANS_END
+};
+
+/* 3 Leave LPS */
+struct wl_pwr_cfg rtl8188E_leave_lps_flow[RTL8188E_TRANS_LPS_TO_ACT_STEPS + RTL8188E_TRANS_END_STEPS] = {
+	/* FW behavior */
+	RTL8188E_TRANS_LPS_TO_ACT
+	RTL8188E_TRANS_END
+};

drivers/staging/r8188eu/hal/HalHWImg8188E_MAC.c

+/******************************************************************************
+*
+* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of version 2 of the GNU General Public License as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT
+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+* more details.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+*
+*
+******************************************************************************/
+
+#include "odm_precomp.h"
+#include <rtw_iol.h>
+
+static bool Checkcondition(const u32  condition, const u32  hex)
+{
+	u32 _board     = (hex & 0x000000FF);
+	u32 _interface = (hex & 0x0000FF00) >> 8;
+	u32 _platform  = (hex & 0x00FF0000) >> 16;
+	u32 cond = condition;
+
+	if (condition == 0xCDCDCDCD)
+		return true;
+
+	cond = condition & 0x000000FF;
+	if ((_board == cond) && cond != 0x00)
+		return false;
+
+	cond = condition & 0x0000FF00;
+	cond = cond >> 8;
+	if ((_interface & cond) == 0 && cond != 0x07)
+		return false;
+
+	cond = condition & 0x00FF0000;
+	cond = cond >> 16;
+	if ((_platform & cond) == 0 && cond != 0x0F)
+		return false;
+	return true;
+}
+
+/******************************************************************************
+*                           MAC_REG.TXT
+******************************************************************************/
+
+static u32 array_MAC_REG_8188E[] = {
+		0x026, 0x00000041,
+		0x027, 0x00000035,
+		0x428, 0x0000000A,
+		0x429, 0x00000010,
+		0x430, 0x00000000,
+		0x431, 0x00000001,
+		0x432, 0x00000002,
+		0x433, 0x00000004,
+		0x434, 0x00000005,
+		0x435, 0x00000006,
+		0x436, 0x00000007,
+		0x437, 0x00000008,
+		0x438, 0x00000000,
+		0x439, 0x00000000,
+		0x43A, 0x00000001,
+		0x43B, 0x00000002,
+		0x43C, 0x00000004,
+		0x43D, 0x00000005,
+		0x43E, 0x00000006,
+		0x43F, 0x00000007,
+		0x440, 0x0000005D,
+		0x441, 0x00000001,
+		0x442, 0x00000000,
+		0x444, 0x00000015,
+		0x445, 0x000000F0,
+		0x446, 0x0000000F,
+		0x447, 0x00000000,
+		0x458, 0x00000041,
+		0x459, 0x000000A8,
+		0x45A, 0x00000072,
+		0x45B, 0x000000B9,
+		0x460, 0x00000066,
+		0x461, 0x00000066,
+		0x480, 0x00000008,
+		0x4C8, 0x000000FF,
+		0x4C9, 0x00000008,
+		0x4CC, 0x000000FF,
+		0x4CD, 0x000000FF,
+		0x4CE, 0x00000001,
+		0x4D3, 0x00000001,
+		0x500, 0x00000026,
+		0x501, 0x000000A2,
+		0x502, 0x0000002F,
+		0x503, 0x00000000,
+		0x504, 0x00000028,
+		0x505, 0x000000A3,
+		0x506, 0x0000005E,
+		0x507, 0x00000000,
+		0x508, 0x0000002B,
+		0x509, 0x000000A4,
+		0x50A, 0x0000005E,
+		0x50B, 0x00000000,
+		0x50C, 0x0000004F,
+		0x50D, 0x000000A4,
+		0x50E, 0x00000000,
+		0x50F, 0x00000000,
+		0x512, 0x0000001C,
+		0x514, 0x0000000A,
+		0x516, 0x0000000A,
+		0x525, 0x0000004F,
+		0x550, 0x00000010,
+		0x551, 0x00000010,
+		0x559, 0x00000002,
+		0x55D, 0x000000FF,
+		0x605, 0x00000030,
+		0x608, 0x0000000E,
+		0x609, 0x0000002A,
+		0x620, 0x000000FF,
+		0x621, 0x000000FF,
+		0x622, 0x000000FF,
+		0x623, 0x000000FF,
+		0x624, 0x000000FF,
+		0x625, 0x000000FF,
+		0x626, 0x000000FF,
+		0x627, 0x000000FF,
+		0x652, 0x00000020,
+		0x63C, 0x0000000A,
+		0x63D, 0x0000000A,
+		0x63E, 0x0000000E,
+		0x63F, 0x0000000E,
+		0x640, 0x00000040,
+		0x66E, 0x00000005,
+		0x700, 0x00000021,
+		0x701, 0x00000043,
+		0x702, 0x00000065,
+		0x703, 0x00000087,
+		0x708, 0x00000021,
+		0x709, 0x00000043,
+		0x70A, 0x00000065,
+		0x70B, 0x00000087,
+};
+
+enum HAL_STATUS ODM_ReadAndConfig_MAC_REG_8188E(struct odm_dm_struct *dm_odm)
+{
+	#define READ_NEXT_PAIR(v1, v2, i) do { i += 2; v1 = array[i]; v2 = array[i+1]; } while (0)
+
+	u32     hex         = 0;
+	u32     i;
+	u8     platform    = dm_odm->SupportPlatform;
+	u8     interface_val   = dm_odm->SupportInterface;
+	u8     board       = dm_odm->BoardType;
+	u32     array_len    = sizeof(array_MAC_REG_8188E)/sizeof(u32);
+	u32    *array       = array_MAC_REG_8188E;
+	bool	biol = false;
+
+	struct adapter *adapt =  dm_odm->Adapter;
+	struct xmit_frame	*pxmit_frame = NULL;
+	u8 bndy_cnt = 1;
+	enum HAL_STATUS rst = HAL_STATUS_SUCCESS;
+	hex += board;
+	hex += interface_val << 8;
+	hex += platform << 16;
+	hex += 0xFF000000;
+
+	biol = rtw_IOL_applied(adapt);
+
+	if (biol) {
+		pxmit_frame = rtw_IOL_accquire_xmit_frame(adapt);
+		if (pxmit_frame == NULL) {
+			pr_info("rtw_IOL_accquire_xmit_frame failed\n");
+			return HAL_STATUS_FAILURE;
+		}
+	}
+
+	for (i = 0; i < array_len; i += 2) {
+		u32 v1 = array[i];
+		u32 v2 = array[i+1];
+
+		/*  This (offset, data) pair meets the condition. */
+		if (v1 < 0xCDCDCDCD) {
+				if (biol) {
+					if (rtw_IOL_cmd_boundary_handle(pxmit_frame))
+						bndy_cnt++;
+					rtw_IOL_append_WB_cmd(pxmit_frame, (u16)v1, (u8)v2, 0xFF);
+				} else {
+					odm_ConfigMAC_8188E(dm_odm, v1, (u8)v2);
+				}
+				continue;
+		} else { /*  This line is the start line of branch. */
+			if (!Checkcondition(array[i], hex)) {
+				/*  Discard the following (offset, data) pairs. */
+				READ_NEXT_PAIR(v1, v2, i);
+				while (v2 != 0xDEAD &&
+				       v2 != 0xCDEF &&
+				       v2 != 0xCDCD && i < array_len - 2) {
+					READ_NEXT_PAIR(v1, v2, i);
+				}
+				i -= 2; /*  prevent from for-loop += 2 */
+			} else { /*  Configure matched pairs and skip to end of if-else. */
+				READ_NEXT_PAIR(v1, v2, i);
+				while (v2 != 0xDEAD &&
+				       v2 != 0xCDEF &&
+				       v2 != 0xCDCD && i < array_len - 2) {
+					if (biol) {
+						if (rtw_IOL_cmd_boundary_handle(pxmit_frame))
+							bndy_cnt++;
+						rtw_IOL_append_WB_cmd(pxmit_frame, (u16)v1, (u8)v2, 0xFF);
+					} else {
+						odm_ConfigMAC_8188E(dm_odm, v1, (u8)v2);
+					}
+
+					READ_NEXT_PAIR(v1, v2, i);
+				}
+				while (v2 != 0xDEAD && i < array_len - 2)
+					READ_NEXT_PAIR(v1, v2, i);
+			}
+		}
+	}
+	if (biol) {
+		if (!rtw_IOL_exec_cmds_sync(dm_odm->Adapter, pxmit_frame, 1000, bndy_cnt)) {
+			pr_info("~~~ MAC IOL_exec_cmds Failed !!!\n");
+			rst = HAL_STATUS_FAILURE;
+		}
+	}
+	return rst;
+}

drivers/staging/r8188eu/hal/HalHWImg8188E_RF.c

+/******************************************************************************
+*
+* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of version 2 of the GNU General Public License as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT
+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+* more details.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+*
+*
+******************************************************************************/
+
+#include "odm_precomp.h"
+
+#include <rtw_iol.h>
+
+static bool CheckCondition(const u32  Condition, const u32  Hex)
+{
+	u32 _board     = (Hex & 0x000000FF);
+	u32 _interface = (Hex & 0x0000FF00) >> 8;
+	u32 _platform  = (Hex & 0x00FF0000) >> 16;
+	u32 cond = Condition;
+
+	if (Condition == 0xCDCDCDCD)
+		return true;
+
+	cond = Condition & 0x000000FF;
+	if ((_board == cond) && cond != 0x00)
+		return false;
+
+	cond = Condition & 0x0000FF00;
+	cond = cond >> 8;
+	if ((_interface & cond) == 0 && cond != 0x07)
+		return false;
+
+	cond = Condition & 0x00FF0000;
+	cond = cond >> 16;
+	if ((_platform & cond) == 0 && cond != 0x0F)
+		return false;
+	return true;
+}
+
+/******************************************************************************
+*                           RadioA_1T.TXT
+******************************************************************************/
+
+static u32 Array_RadioA_1T_8188E[] = {
+		0x000, 0x00030000,
+		0x008, 0x00084000,
+		0x018, 0x00000407,
+		0x019, 0x00000012,
+		0x01E, 0x00080009,
+		0x01F, 0x00000880,
+		0x02F, 0x0001A060,
+		0x03F, 0x00000000,
+		0x042, 0x000060C0,
+		0x057, 0x000D0000,
+		0x058, 0x000BE180,
+		0x067, 0x00001552,
+		0x083, 0x00000000,
+		0x0B0, 0x000FF8FC,
+		0x0B1, 0x00054400,
+		0x0B2, 0x000CCC19,
+		0x0B4, 0x00043003,
+		0x0B6, 0x0004953E,
+		0x0B7, 0x0001C718,
+		0x0B8, 0x000060FF,
+		0x0B9, 0x00080001,
+		0x0BA, 0x00040000,
+		0x0BB, 0x00000400,
+		0x0BF, 0x000C0000,
+		0x0C2, 0x00002400,
+		0x0C3, 0x00000009,
+		0x0C4, 0x00040C91,
+		0x0C5, 0x00099999,
+		0x0C6, 0x000000A3,
+		0x0C7, 0x00088820,
+		0x0C8, 0x00076C06,
+		0x0C9, 0x00000000,
+		0x0CA, 0x00080000,
+		0x0DF, 0x00000180,
+		0x0EF, 0x000001A0,
+		0x051, 0x0006B27D,
+		0xFF0F041F, 0xABCD,
+		0x052, 0x0007E4DD,
+		0xCDCDCDCD, 0xCDCD,
+		0x052, 0x0007E49D,
+		0xFF0F041F, 0xDEAD,
+		0x053, 0x00000073,
+		0x056, 0x00051FF3,
+		0x035, 0x00000086,
+		0x035, 0x00000186,
+		0x035, 0x00000286,
+		0x036, 0x00001C25,
+		0x036, 0x00009C25,
+		0x036, 0x00011C25,
+		0x036, 0x00019C25,
+		0x0B6, 0x00048538,
+		0x018, 0x00000C07,
+		0x05A, 0x0004BD00,
+		0x019, 0x000739D0,
+		0x034, 0x0000ADF3,
+		0x034, 0x00009DF0,
+		0x034, 0x00008DED,
+		0x034, 0x00007DEA,
+		0x034, 0x00006DE7,
+		0x034, 0x000054EE,
+		0x034, 0x000044EB,
+		0x034, 0x000034E8,
+		0x034, 0x0000246B,
+		0x034, 0x00001468,
+		0x034, 0x0000006D,
+		0x000, 0x00030159,
+		0x084, 0x00068200,
+		0x086, 0x000000CE,
+		0x087, 0x00048A00,
+		0x08E, 0x00065540,
+		0x08F, 0x00088000,
+		0x0EF, 0x000020A0,
+		0x03B, 0x000F02B0,
+		0x03B, 0x000EF7B0,
+		0x03B, 0x000D4FB0,
+		0x03B, 0x000CF060,
+		0x03B, 0x000B0090,
+		0x03B, 0x000A0080,
+		0x03B, 0x00090080,
+		0x03B, 0x0008F780,
+		0x03B, 0x000722B0,
+		0x03B, 0x0006F7B0,
+		0x03B, 0x00054FB0,
+		0x03B, 0x0004F060,
+		0x03B, 0x00030090,
+		0x03B, 0x00020080,
+		0x03B, 0x00010080,
+		0x03B, 0x0000F780,
+		0x0EF, 0x000000A0,
+		0x000, 0x00010159,
+		0x018, 0x0000F407,
+		0xFFE, 0x00000000,
+		0xFFE, 0x00000000,
+		0x01F, 0x00080003,
+		0xFFE, 0x00000000,
+		0xFFE, 0x00000000,
+		0x01E, 0x00000001,
+		0x01F, 0x00080000,
+		0x000, 0x00033E60,
+};
+
+enum HAL_STATUS ODM_ReadAndConfig_RadioA_1T_8188E(struct odm_dm_struct *pDM_Odm)
+{
+	#define READ_NEXT_PAIR(v1, v2, i) do	\
+		 { i += 2; v1 = Array[i];	\
+		 v2 = Array[i+1]; } while (0)
+
+	u32     hex         = 0;
+	u32     i           = 0;
+	u8     platform    = pDM_Odm->SupportPlatform;
+	u8     interfaceValue   = pDM_Odm->SupportInterface;
+	u8     board       = pDM_Odm->BoardType;
+	u32     ArrayLen    = sizeof(Array_RadioA_1T_8188E)/sizeof(u32);
+	u32    *Array       = Array_RadioA_1T_8188E;
+	bool		biol = false;
+	struct adapter *Adapter =  pDM_Odm->Adapter;
+	struct xmit_frame *pxmit_frame = NULL;
+	u8 bndy_cnt = 1;
+	enum HAL_STATUS rst = HAL_STATUS_SUCCESS;
+
+	hex += board;
+	hex += interfaceValue << 8;
+	hex += platform << 16;
+	hex += 0xFF000000;
+	biol = rtw_IOL_applied(Adapter);
+
+	if (biol) {
+		pxmit_frame = rtw_IOL_accquire_xmit_frame(Adapter);
+		if (pxmit_frame == NULL) {
+			pr_info("rtw_IOL_accquire_xmit_frame failed\n");
+			return HAL_STATUS_FAILURE;
+		}
+	}
+
+	for (i = 0; i < ArrayLen; i += 2) {
+		u32 v1 = Array[i];
+		u32 v2 = Array[i+1];
+
+		/*  This (offset, data) pair meets the condition. */
+		if (v1 < 0xCDCDCDCD) {
+			if (biol) {
+				if (rtw_IOL_cmd_boundary_handle(pxmit_frame))
+					bndy_cnt++;
+
+				if (v1 == 0xffe)
+					rtw_IOL_append_DELAY_MS_cmd(pxmit_frame, 50);
+				else if (v1 == 0xfd)
+					rtw_IOL_append_DELAY_MS_cmd(pxmit_frame, 5);
+				else if (v1 == 0xfc)
+					rtw_IOL_append_DELAY_MS_cmd(pxmit_frame, 1);
+				else if (v1 == 0xfb)
+					rtw_IOL_append_DELAY_US_cmd(pxmit_frame, 50);
+				else if (v1 == 0xfa)
+					rtw_IOL_append_DELAY_US_cmd(pxmit_frame, 5);
+				else if (v1 == 0xf9)
+					rtw_IOL_append_DELAY_US_cmd(pxmit_frame, 1);
+				else
+					rtw_IOL_append_WRF_cmd(pxmit_frame, RF_PATH_A, (u16)v1, v2, bRFRegOffsetMask);
+			} else {
+				odm_ConfigRF_RadioA_8188E(pDM_Odm, v1, v2);
+			}
+		    continue;
+		} else { /*  This line is the start line of branch. */
+			if (!CheckCondition(Array[i], hex)) {
+				/*  Discard the following (offset, data) pairs. */
+				READ_NEXT_PAIR(v1, v2, i);
+				while (v2 != 0xDEAD &&
+				       v2 != 0xCDEF &&
+				       v2 != 0xCDCD && i < ArrayLen - 2)
+					READ_NEXT_PAIR(v1, v2, i);
+				i -= 2; /*  prevent from for-loop += 2 */
+			} else { /*  Configure matched pairs and skip to end of if-else. */
+			READ_NEXT_PAIR(v1, v2, i);
+				while (v2 != 0xDEAD &&
+				       v2 != 0xCDEF &&
+				       v2 != 0xCDCD && i < ArrayLen - 2) {
+					if (biol) {
+						if (rtw_IOL_cmd_boundary_handle(pxmit_frame))
+							bndy_cnt++;
+
+						if (v1 == 0xffe)
+							rtw_IOL_append_DELAY_MS_cmd(pxmit_frame, 50);
+						else if (v1 == 0xfd)
+							rtw_IOL_append_DELAY_MS_cmd(pxmit_frame, 5);
+						else if (v1 == 0xfc)
+							rtw_IOL_append_DELAY_MS_cmd(pxmit_frame, 1);
+						else if (v1 == 0xfb)
+							rtw_IOL_append_DELAY_US_cmd(pxmit_frame, 50);
+						else if (v1 == 0xfa)
+							rtw_IOL_append_DELAY_US_cmd(pxmit_frame, 5);
+						else if (v1 == 0xf9)
+							rtw_IOL_append_DELAY_US_cmd(pxmit_frame, 1);
+						else
+							rtw_IOL_append_WRF_cmd(pxmit_frame, RF_PATH_A, (u16)v1, v2, bRFRegOffsetMask);
+					} else {
+						odm_ConfigRF_RadioA_8188E(pDM_Odm, v1, v2);
+					}
+					READ_NEXT_PAIR(v1, v2, i);
+				}
+
+				while (v2 != 0xDEAD && i < ArrayLen - 2)
+					READ_NEXT_PAIR(v1, v2, i);
+			}
+		}
+	}
+	if (biol) {
+		if (!rtw_IOL_exec_cmds_sync(pDM_Odm->Adapter, pxmit_frame, 1000, bndy_cnt)) {
+			rst = HAL_STATUS_FAILURE;
+			pr_info("~~~ IOL Config %s Failed !!!\n", __func__);
+		}
+	}
+	return rst;
+}

drivers/staging/r8188eu/hal/HalPhyRf.c

+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+ #include "odm_precomp.h"
+
+/* 3============================================================ */
+/* 3 IQ Calibration */
+/* 3============================================================ */
+
+void ODM_ResetIQKResult(struct odm_dm_struct *pDM_Odm)
+{
+}
+
+u8 ODM_GetRightChnlPlaceforIQK(u8 chnl)
+{
+	u8	channel_all[ODM_TARGET_CHNL_NUM_2G_5G] = {
+		1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14,
+		36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64,
+		100, 102, 104, 106, 108, 110, 112, 114, 116, 118, 120, 122,
+		124, 126, 128, 130, 132, 134, 136, 138, 140, 149, 151, 153,
+		155, 157, 159, 161, 163, 165
+	};
+	u8	place = chnl;
+
+	if (chnl > 14) {
+		for (place = 14; place < sizeof(channel_all); place++) {
+			if (channel_all[place] == chnl)
+				return place-13;
+		}
+	}
+	return 0;
+}

drivers/staging/r8188eu/hal/HalPwrSeqCmd.c

+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+/*++
+Copyright (c) Realtek Semiconductor Corp. All rights reserved.
+
+Module Name:
+	HalPwrSeqCmd.c
+
+Abstract:
+	Implement HW Power sequence configuration CMD handling routine for Realtek devices.
+
+Major Change History:
+	When       Who               What
+	---------- ---------------   -------------------------------
+	2011-10-26 Lucas            Modify to be compatible with SD4-CE driver.
+	2011-07-07 Roger            Create.
+
+--*/
+
+#include <HalPwrSeqCmd.h>
+
+/*	Description: */
+/*		This routine deals with the Power Configuration CMDs parsing
+ *		for RTL8723/RTL8188E Series IC.
+ *	Assumption:
+ *		We should follow specific format which was released from HW SD.
+ */
+u8 HalPwrSeqCmdParsing(struct adapter *padapter, u8 cut_vers, u8 fab_vers,
+		       u8 ifacetype, struct wl_pwr_cfg pwrseqcmd[])
+{
+	struct wl_pwr_cfg pwrcfgcmd = {0};
+	u8 poll_bit = false;
+	u32 aryidx = 0;
+	u8 value = 0;
+	u32 offset = 0;
+	u32 poll_count = 0; /*  polling autoload done. */
+	u32 max_poll_count = 5000;
+
+	do {
+		pwrcfgcmd = pwrseqcmd[aryidx];
+
+		RT_TRACE(_module_hal_init_c_ , _drv_info_,
+			 ("HalPwrSeqCmdParsing: offset(%#x) cut_msk(%#x) fab_msk(%#x) interface_msk(%#x) base(%#x) cmd(%#x) msk(%#x) value(%#x)\n",
+			 GET_PWR_CFG_OFFSET(pwrcfgcmd),
+			 GET_PWR_CFG_CUT_MASK(pwrcfgcmd),
+			 GET_PWR_CFG_FAB_MASK(pwrcfgcmd),
+			 GET_PWR_CFG_INTF_MASK(pwrcfgcmd),
+			 GET_PWR_CFG_BASE(pwrcfgcmd),
+			 GET_PWR_CFG_CMD(pwrcfgcmd),
+			 GET_PWR_CFG_MASK(pwrcfgcmd),
+			 GET_PWR_CFG_VALUE(pwrcfgcmd)));
+
+		/* 2 Only Handle the command whose FAB, CUT, and Interface are matched */
+		if ((GET_PWR_CFG_FAB_MASK(pwrcfgcmd) & fab_vers) &&
+		    (GET_PWR_CFG_CUT_MASK(pwrcfgcmd) & cut_vers) &&
+		    (GET_PWR_CFG_INTF_MASK(pwrcfgcmd) & ifacetype)) {
+			switch (GET_PWR_CFG_CMD(pwrcfgcmd)) {
+			case PWR_CMD_READ:
+				RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_READ\n"));
+				break;
+			case PWR_CMD_WRITE:
+				RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_WRITE\n"));
+				offset = GET_PWR_CFG_OFFSET(pwrcfgcmd);
+
+				/*  Read the value from system register */
+				value = rtw_read8(padapter, offset);
+
+				value &= ~(GET_PWR_CFG_MASK(pwrcfgcmd));
+				value |= (GET_PWR_CFG_VALUE(pwrcfgcmd) & GET_PWR_CFG_MASK(pwrcfgcmd));
+
+				/*  Write the value back to system register */
+				rtw_write8(padapter, offset, value);
+				break;
+			case PWR_CMD_POLLING:
+				RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_POLLING\n"));
+
+				poll_bit = false;
+				offset = GET_PWR_CFG_OFFSET(pwrcfgcmd);
+				do {
+						value = rtw_read8(padapter, offset);
+
+					value &= GET_PWR_CFG_MASK(pwrcfgcmd);
+					if (value == (GET_PWR_CFG_VALUE(pwrcfgcmd) & GET_PWR_CFG_MASK(pwrcfgcmd)))
+						poll_bit = true;
+					else
+						rtw_udelay_os(10);
+
+					if (poll_count++ > max_poll_count) {
+						DBG_88E("Fail to polling Offset[%#x]\n", offset);
+						return false;
+					}
+				} while (!poll_bit);
+				break;
+			case PWR_CMD_DELAY:
+				RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_DELAY\n"));
+				if (GET_PWR_CFG_VALUE(pwrcfgcmd) == PWRSEQ_DELAY_US)
+					rtw_udelay_os(GET_PWR_CFG_OFFSET(pwrcfgcmd));
+				else
+					rtw_udelay_os(GET_PWR_CFG_OFFSET(pwrcfgcmd)*1000);
+				break;
+			case PWR_CMD_END:
+				/*  When this command is parsed, end the process */
+				RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_END\n"));
+				return true;
+				break;
+			default:
+				RT_TRACE(_module_hal_init_c_ , _drv_err_, ("HalPwrSeqCmdParsing: Unknown CMD!!\n"));
+				break;
+			}
+		}
+
+		aryidx++;/* Add Array Index */
+	} while (1);
+	return true;
+}