Commit 8cd774ad authored by Dongdong Deng's avatar Dongdong Deng Committed by Greg Kroah-Hartman

serial: cpm_uart: implement the cpm_uart_early_write() function for console poll

The cpm_uart_early_write() function which was used for console poll
isn't implemented in the cpm uart driver.

Implementing this function both fixes the build when CONFIG_CONSOLE_POLL
is set and allows kgdboc to work via the cpm uart.
Signed-off-by: default avatarDongdong Deng <dongdong.deng@windriver.com>
Reviewed-by: default avatarBruce Ashfield <bruce.ashfield@windriver.com>
Cc: stable <stable@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 93416253
...@@ -930,6 +930,83 @@ static void cpm_uart_config_port(struct uart_port *port, int flags) ...@@ -930,6 +930,83 @@ static void cpm_uart_config_port(struct uart_port *port, int flags)
} }
} }
#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_CPM_CONSOLE)
/*
* Write a string to the serial port
* Note that this is called with interrupts already disabled
*/
static void cpm_uart_early_write(struct uart_cpm_port *pinfo,
const char *string, u_int count)
{
unsigned int i;
cbd_t __iomem *bdp, *bdbase;
unsigned char *cpm_outp_addr;
/* Get the address of the host memory buffer.
*/
bdp = pinfo->tx_cur;
bdbase = pinfo->tx_bd_base;
/*
* Now, do each character. This is not as bad as it looks
* since this is a holding FIFO and not a transmitting FIFO.
* We could add the complexity of filling the entire transmit
* buffer, but we would just wait longer between accesses......
*/
for (i = 0; i < count; i++, string++) {
/* Wait for transmitter fifo to empty.
* Ready indicates output is ready, and xmt is doing
* that, not that it is ready for us to send.
*/
while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
;
/* Send the character out.
* If the buffer address is in the CPM DPRAM, don't
* convert it.
*/
cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr),
pinfo);
*cpm_outp_addr = *string;
out_be16(&bdp->cbd_datlen, 1);
setbits16(&bdp->cbd_sc, BD_SC_READY);
if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
bdp = bdbase;
else
bdp++;
/* if a LF, also do CR... */
if (*string == 10) {
while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
;
cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr),
pinfo);
*cpm_outp_addr = 13;
out_be16(&bdp->cbd_datlen, 1);
setbits16(&bdp->cbd_sc, BD_SC_READY);
if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
bdp = bdbase;
else
bdp++;
}
}
/*
* Finally, Wait for transmitter & holding register to empty
* and restore the IER
*/
while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
;
pinfo->tx_cur = bdp;
}
#endif
#ifdef CONFIG_CONSOLE_POLL #ifdef CONFIG_CONSOLE_POLL
/* Serial polling routines for writing and reading from the uart while /* Serial polling routines for writing and reading from the uart while
* in an interrupt or debug context. * in an interrupt or debug context.
...@@ -999,7 +1076,7 @@ static void cpm_put_poll_char(struct uart_port *port, ...@@ -999,7 +1076,7 @@ static void cpm_put_poll_char(struct uart_port *port,
static char ch[2]; static char ch[2];
ch[0] = (char)c; ch[0] = (char)c;
cpm_uart_early_write(pinfo->port.line, ch, 1); cpm_uart_early_write(pinfo, ch, 1);
} }
#endif /* CONFIG_CONSOLE_POLL */ #endif /* CONFIG_CONSOLE_POLL */
...@@ -1130,9 +1207,6 @@ static void cpm_uart_console_write(struct console *co, const char *s, ...@@ -1130,9 +1207,6 @@ static void cpm_uart_console_write(struct console *co, const char *s,
u_int count) u_int count)
{ {
struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index]; struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index];
unsigned int i;
cbd_t __iomem *bdp, *bdbase;
unsigned char *cp;
unsigned long flags; unsigned long flags;
int nolock = oops_in_progress; int nolock = oops_in_progress;
...@@ -1142,66 +1216,7 @@ static void cpm_uart_console_write(struct console *co, const char *s, ...@@ -1142,66 +1216,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
spin_lock_irqsave(&pinfo->port.lock, flags); spin_lock_irqsave(&pinfo->port.lock, flags);
} }
/* Get the address of the host memory buffer. cpm_uart_early_write(pinfo, s, count);
*/
bdp = pinfo->tx_cur;
bdbase = pinfo->tx_bd_base;
/*
* Now, do each character. This is not as bad as it looks
* since this is a holding FIFO and not a transmitting FIFO.
* We could add the complexity of filling the entire transmit
* buffer, but we would just wait longer between accesses......
*/
for (i = 0; i < count; i++, s++) {
/* Wait for transmitter fifo to empty.
* Ready indicates output is ready, and xmt is doing
* that, not that it is ready for us to send.
*/
while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
;
/* Send the character out.
* If the buffer address is in the CPM DPRAM, don't
* convert it.
*/
cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
*cp = *s;
out_be16(&bdp->cbd_datlen, 1);
setbits16(&bdp->cbd_sc, BD_SC_READY);
if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
bdp = bdbase;
else
bdp++;
/* if a LF, also do CR... */
if (*s == 10) {
while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
;
cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
*cp = 13;
out_be16(&bdp->cbd_datlen, 1);
setbits16(&bdp->cbd_sc, BD_SC_READY);
if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
bdp = bdbase;
else
bdp++;
}
}
/*
* Finally, Wait for transmitter & holding register to empty
* and restore the IER
*/
while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
;
pinfo->tx_cur = bdp;
if (unlikely(nolock)) { if (unlikely(nolock)) {
local_irq_restore(flags); local_irq_restore(flags);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment