net/mlx5: add IFC bits for bypassing port select flow table

port_select_flow_table_bypass - When set, device supports
bypass port select flow table.
active_port - Bitmask indicates the current active ports
in PORT_SELECT_FT LAG.
MLX5_SET_HCA_CAP_OP_MODE_PORT_SELECTION - op_mod to operate
PORT_SELECTION_Capabilities.
Signed-off-by: Liu, Changcheng <jerrliu@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

include/linux/mlx5/mlx5_ifc.h

@@ -68,6 +68,7 @@ enum {
 	MLX5_SET_HCA_CAP_OP_MOD_ODP                   = 0x2,
 	MLX5_SET_HCA_CAP_OP_MOD_ATOMIC                = 0x3,
 	MLX5_SET_HCA_CAP_OP_MOD_ROCE                  = 0x4,
+	MLX5_SET_HCA_CAP_OP_MODE_PORT_SELECTION       = 0x25,
 };
 
 enum {
@@ -814,7 +815,9 @@ struct mlx5_ifc_flow_table_nic_cap_bits {
 struct mlx5_ifc_port_selection_cap_bits {
 	u8         reserved_at_0[0x10];
 	u8         port_select_flow_table[0x1];
-	u8         reserved_at_11[0xf];
+	u8         reserved_at_11[0x1];
+	u8         port_select_flow_table_bypass[0x1];
+	u8         reserved_at_13[0xd];
 
 	u8         reserved_at_20[0x1e0];
 
@@ -10933,7 +10936,9 @@ struct mlx5_ifc_lagc_bits {
 	u8         reserved_at_18[0x5];
 	u8         lag_state[0x3];
 
-	u8         reserved_at_20[0x14];
+	u8         reserved_at_20[0xc];
+	u8         active_port[0x4];
+	u8         reserved_at_30[0x4];
 	u8         tx_remap_affinity_2[0x4];
 	u8         reserved_at_38[0x4];
 	u8         tx_remap_affinity_1[0x4];