Merge tag 'sunxi-core-for-3.19' of...

Merge tag 'sunxi-core-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/soc

Pull "Allwinner Core Additions for 3.19" from Maxime Ripard:

This has mostly been about introducing A80 support

* tag 'sunxi-core-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  ARM: sunxi: make sun6i SMP ops static
  ARM: sunxi: Select ARCH_HAS_RESET_CONTROLLER and RESET_CONTROLLER for sun9i
  Documentation: sunxi: Add A80 datasheet link
  devicetree: bindings: Document supported Allwinner sunxi SoCs
  ARM: sunxi: Introduce Allwinner A80 support
  devicetree: bindings: Add vendor prefix for Merrii Technology Co., Ltd.
  ARM: sunxi: Add debug uart used by sun9i (Allwinner A80)
  Documentation: sunxi: Update Allwinner SoC documentation (A31/A31s/A23)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/arm/sunxi/README

@@ -37,16 +37,26 @@ SunXi family
           http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
 
       - Allwinner A23
-        + Not Supported
+        + Datasheet
+          http://dl.linux-sunxi.org/A23/A23%20Datasheet%20V1.0%2020130830.pdf
+        + User Manual
+          http://dl.linux-sunxi.org/A23/A23%20User%20Manual%20V1.0%2020130830.pdf
 
     * Quad ARM Cortex-A7 based SoCs
       - Allwinner A31 (sun6i)
         + Datasheet
-          http://dl.linux-sunxi.org/A31/A31%20Datasheet%20-%20v1.00%20(2012-12-24).pdf
+          http://dl.linux-sunxi.org/A31/A3x_release_document/A31/IC/A31%20datasheet%20V1.3%2020131106.pdf
+        + User Manual
+          http://dl.linux-sunxi.org/A31/A3x_release_document/A31/IC/A31%20user%20manual%20V1.1%2020130630.pdf
 
       - Allwinner A31s (sun6i)
         + Not Supported
+        + Datasheet
+          http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20datasheet%20V1.3%2020131106.pdf
+        + User Manual
+          http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20User%20Manual%20%20V1.0%2020130322.pdf
 
     * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
       - Allwinner A80
-        + Not Supported
\ No newline at end of file
+        + Datasheet
+	  http://dl.linux-sunxi.org/A80/A80_Datasheet_Revision_1.0_0404.pdf

Documentation/devicetree/bindings/arm/sunxi.txt

+Allwinner sunXi Platforms Device Tree Bindings
+
+Each device tree must specify which Allwinner SoC it uses,
+using one of the following compatible strings:
+
+  allwinner,sun4i-a10
+  allwinner,sun5i-a10s
+  allwinner,sun5i-a13
+  allwinner,sun6i-a31
+  allwinner,sun7i-a20
+  allwinner,sun8i-a23
+  allwinner,sun9i-a80

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -90,6 +90,7 @@ lltc	Linear Technology Corporation
 marvell	Marvell Technology Group Ltd.
 maxim	Maxim Integrated Products
 mediatek	MediaTek Inc.
+merrii	Merrii Technology Co., Ltd.
 micrel	Micrel Inc.
 microchip	Microchip Technology Inc.
 mitsubishi	Mitsubishi Electric Corporation

arch/arm/Kconfig.debug

@@ -750,6 +750,14 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on SOCFPGA based platforms.
 
+	config DEBUG_SUN9I_UART0
+		bool "Kernel low-level debugging messages via sun9i UART0"
+		depends on MACH_SUN9I
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Allwinner A80 based platforms on the UART0.
+
 	config DEBUG_SUNXI_UART0
 		bool "Kernel low-level debugging messages via sunXi UART0"
 		depends on ARCH_SUNXI
@@ -1142,6 +1150,7 @@ config DEBUG_UART_PHYS
 	default 0x02530c00 if DEBUG_KEYSTONE_UART0
 	default 0x02531000 if DEBUG_KEYSTONE_UART1
 	default 0x03010fe0 if ARCH_RPC
+	default 0x07000000 if DEBUG_SUN9I_UART0
 	default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
 				DEBUG_VEXPRESS_UART0_CA9
 	default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
@@ -1231,6 +1240,7 @@ config DEBUG_UART_VIRT
 	default 0xf2100000 if DEBUG_PXA_UART1
 	default 0xf4090000 if ARCH_LPC32XX
 	default 0xf4200000 if ARCH_GEMINI
+	default 0xf7000000 if DEBUG_SUN9I_UART0
 	default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
 				DEBUG_S3C2410_UART0)
 	default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \

arch/arm/mach-sunxi/Kconfig

@@ -42,4 +42,11 @@ config MACH_SUN8I
 	select MFD_SUN6I_PRCM
 	select RESET_CONTROLLER
 
+config MACH_SUN9I
+	bool "Allwinner (sun9i) SoCs support"
+	default ARCH_SUNXI
+	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_GIC
+	select RESET_CONTROLLER
+
 endif

arch/arm/mach-sunxi/platsmp.c

@@ -116,7 +116,7 @@ static int sun6i_smp_boot_secondary(unsigned int cpu,
 	return 0;
 }
 
-struct smp_operations sun6i_smp_ops __initdata = {
+static struct smp_operations sun6i_smp_ops __initdata = {
 	.smp_prepare_cpus	= sun6i_smp_prepare_cpus,
 	.smp_boot_secondary	= sun6i_smp_boot_secondary,
 };

arch/arm/mach-sunxi/sunxi.c

@@ -63,3 +63,12 @@ static const char * const sun8i_board_dt_compat[] = {
 DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i (A23) Family")
 	.dt_compat	= sun8i_board_dt_compat,
 MACHINE_END
+
+static const char * const sun9i_board_dt_compat[] = {
+	"allwinner,sun9i-a80",
+	NULL,
+};
+
+DT_MACHINE_START(SUN9I_DT, "Allwinner sun9i Family")
+	.dt_compat	= sun9i_board_dt_compat,
+MACHINE_END