ARM: dts: OMAP3+: add clock nodes for CPU

OMAP34xx, AM3517 and OMAP36xx platforms use dpll1 clock.

OMAP443x, OMAP446x, OMAP447x, OMAP5, DRA7, AM43xx platforms use
dpll_mpu clock.

Latency used is the generic latency defined in omap-cpufreq
driver.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/am33xx.dtsi

@@ -58,6 +58,10 @@ cpu@0 {
 				275000  1125000
 			>;
 			voltage-tolerance = <2>; /* 2 percentage */
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
 			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 	};

arch/arm/boot/dts/am4372.dtsi

@@ -33,6 +33,11 @@ cpu@0 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <0>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 	};
 

arch/arm/boot/dts/dra7.dtsi

@@ -47,6 +47,11 @@ cpu0: cpu@0 {
 				1000000	1060000
 				1176000	1160000
 				>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 		cpu@1 {
 			device_type = "cpu";

arch/arm/boot/dts/omap3.dtsi

@@ -35,6 +35,11 @@ cpu@0 {
 			compatible = "arm,cortex-a8";
 			device_type = "cpu";
 			reg = <0x0>;
+
+			clocks = <&dpll1_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 	};
 

arch/arm/boot/dts/omap4.dtsi

@@ -36,6 +36,11 @@ cpu@0 {
 			device_type = "cpu";
 			next-level-cache = <&L2>;
 			reg = <0x0>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 		cpu@1 {
 			compatible = "arm,cortex-a9";

arch/arm/boot/dts/omap5.dtsi

@@ -49,6 +49,12 @@ cpu0: cpu@0 {
 				1000000 1060000
 				1500000 1250000
 			>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+
 			/* cooling options */
 			cooling-min-level = <0>;
 			cooling-max-level = <2>;