Skip to content

L
linux
Commit 8d81b77f authored by Sebastian Reichel's avatar Sebastian Reichel Committed by Heiko Stuebner
Browse files
Options

arm64: dts: rockchip: add rk3588 PCIe2 support 

Add all three PCIe2 IP blocks to the RK3588 DT. Note, that RK3588
also has two PCIe3 IP blocks, that will be handled separately.
Co-developed-by: default avatarKever Yang <kever.yang@rock-chips.com>
Signed-off-by: default avatarKever Yang <kever.yang@rock-chips.com>
Tested-by: Jagan Teki <jagan@edgeble.ai> # edgeble-neu6a, 6b
Reviewed-by: default avatarJagan Teki <jagan@edgeble.ai>
Signed-off-by: default avatarSebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230731165723.53069-6-sebastian.reichel@collabora.comSigned-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent eddf7302
Hide whitespace changes
Inline Side-by-side
Showing with 153 additions and 0 deletions
arch/arm64/boot/dts/rockchip/rk3588.dtsi
View file @ 8d81b77f
......@@ -187,6 +187,57 @@ pcie3x2_intc: legacy-interrupt-controller {
};
};
pcie2x1l0: pcie@fe170000 {
compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
bus-range = <0x20 0x2f>;
clocks = <&cru ACLK_PCIE_1L0_MSTR>, <&cru ACLK_PCIE_1L0_SLV>,
<&cru ACLK_PCIE_1L0_DBI>, <&cru PCLK_PCIE_1L0>,
<&cru CLK_PCIE_AUX2>, <&cru CLK_PCIE1L0_PIPE>;
clock-names = "aclk_mst", "aclk_slv",
"aclk_dbi", "pclk",
"aux", "pipe";
device_type = "pci";
interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "sys", "pmc", "msg", "legacy", "err";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie2x1l0_intc 0>,
<0 0 0 2 &pcie2x1l0_intc 1>,
<0 0 0 3 &pcie2x1l0_intc 2>,
<0 0 0 4 &pcie2x1l0_intc 3>;
linux,pci-domain = <2>;
max-link-speed = <2>;
msi-map = <0x2000 &its0 0x2000 0x1000>;
num-lanes = <1>;
phys = <&combphy1_ps PHY_TYPE_PCIE>;
phy-names = "pcie-phy";
power-domains = <&power RK3588_PD_PCIE>;
ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>,
<0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x00e00000>,
<0x03000000 0x0 0x40000000 0x9 0x80000000 0x0 0x40000000>;
reg = <0xa 0x40800000 0x0 0x00400000>,
<0x0 0xfe170000 0x0 0x00010000>,
<0x0 0xf2000000 0x0 0x00100000>;
reg-names = "dbi", "apb", "config";
resets = <&cru SRST_PCIE2_POWER_UP>, <&cru SRST_P_PCIE2>;
reset-names = "pwr", "pipe";
#address-cells = <3>;
#size-cells = <2>;
status = "disabled";
pcie2x1l0_intc: legacy-interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 240 IRQ_TYPE_EDGE_RISING 0>;
};
};
gmac0: ethernet@fe1b0000 {
compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
reg = <0x0 0xfe1b0000 0x0 0x10000>;
......
arch/arm64/boot/dts/rockchip/rk3588s.dtsi
View file @ 8d81b77f
......@@ -1227,6 +1227,108 @@ qos_vop_m1: qos@fdf82200 {
reg = <0x0 0xfdf82200 0x0 0x20>;
};
pcie2x1l1: pcie@fe180000 {
compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
bus-range = <0x30 0x3f>;
clocks = <&cru ACLK_PCIE_1L1_MSTR>, <&cru ACLK_PCIE_1L1_SLV>,
<&cru ACLK_PCIE_1L1_DBI>, <&cru PCLK_PCIE_1L1>,
<&cru CLK_PCIE_AUX3>, <&cru CLK_PCIE1L1_PIPE>;
clock-names = "aclk_mst", "aclk_slv",
"aclk_dbi", "pclk",
"aux", "pipe";
device_type = "pci";
interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "sys", "pmc", "msg", "legacy", "err";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie2x1l1_intc 0>,
<0 0 0 2 &pcie2x1l1_intc 1>,
<0 0 0 3 &pcie2x1l1_intc 2>,
<0 0 0 4 &pcie2x1l1_intc 3>;
linux,pci-domain = <3>;
max-link-speed = <2>;
msi-map = <0x3000 &its0 0x3000 0x1000>;
num-lanes = <1>;
phys = <&combphy2_psu PHY_TYPE_PCIE>;
phy-names = "pcie-phy";
power-domains = <&power RK3588_PD_PCIE>;
ranges = <0x01000000 0x0 0xf3100000 0x0 0xf3100000 0x0 0x00100000>,
<0x02000000 0x0 0xf3200000 0x0 0xf3200000 0x0 0x00e00000>,
<0x03000000 0x0 0x40000000 0x9 0xc0000000 0x0 0x40000000>;
reg = <0xa 0x40c00000 0x0 0x00400000>,
<0x0 0xfe180000 0x0 0x00010000>,
<0x0 0xf3000000 0x0 0x00100000>;
reg-names = "dbi", "apb", "config";
resets = <&cru SRST_PCIE3_POWER_UP>, <&cru SRST_P_PCIE3>;
reset-names = "pwr", "pipe";
#address-cells = <3>;
#size-cells = <2>;
status = "disabled";
pcie2x1l1_intc: legacy-interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 245 IRQ_TYPE_EDGE_RISING 0>;
};
};
pcie2x1l2: pcie@fe190000 {
compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
bus-range = <0x40 0x4f>;
clocks = <&cru ACLK_PCIE_1L2_MSTR>, <&cru ACLK_PCIE_1L2_SLV>,
<&cru ACLK_PCIE_1L2_DBI>, <&cru PCLK_PCIE_1L2>,
<&cru CLK_PCIE_AUX4>, <&cru CLK_PCIE1L2_PIPE>;
clock-names = "aclk_mst", "aclk_slv",
"aclk_dbi", "pclk",
"aux", "pipe";
device_type = "pci";
interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "sys", "pmc", "msg", "legacy", "err";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie2x1l2_intc 0>,
<0 0 0 2 &pcie2x1l2_intc 1>,
<0 0 0 3 &pcie2x1l2_intc 2>,
<0 0 0 4 &pcie2x1l2_intc 3>;
linux,pci-domain = <4>;
max-link-speed = <2>;
msi-map = <0x4000 &its0 0x4000 0x1000>;
num-lanes = <1>;
phys = <&combphy0_ps PHY_TYPE_PCIE>;
phy-names = "pcie-phy";
power-domains = <&power RK3588_PD_PCIE>;
ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>,
<0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x00e00000>,
<0x03000000 0x0 0x40000000 0xa 0x00000000 0x0 0x40000000>;
reg = <0xa 0x41000000 0x0 0x00400000>,
<0x0 0xfe190000 0x0 0x00010000>,
<0x0 0xf4000000 0x0 0x00100000>;
reg-names = "dbi", "apb", "config";
resets = <&cru SRST_PCIE4_POWER_UP>, <&cru SRST_P_PCIE4>;
reset-names = "pwr", "pipe";
#address-cells = <3>;
#size-cells = <2>;
status = "disabled";
pcie2x1l2_intc: legacy-interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 250 IRQ_TYPE_EDGE_RISING 0>;
};
};
gmac1: ethernet@fe1c0000 {
compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
reg = <0x0 0xfe1c0000 0x0 0x10000>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7