[SCSI] qla2xxx: Determine the number of outstanding commands based on available resources.

Base the number of outstanding requests the driver will keep track of on the
available resources instead of being hard-coded.
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/qla2xxx/qla_bsg.c

@@ -1950,7 +1950,7 @@ qla24xx_bsg_timeout(struct fc_bsg_job *bsg_job)
 		if (!req)
 			continue;
 
-		for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+		for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) {
 			sp = req->outstanding_cmds[cnt];
 			if (sp) {
 				if (((sp->type == SRB_CT_CMD) ||

drivers/scsi/qla2xxx/qla_dbg.c

@@ -11,7 +11,7 @@
  * ----------------------------------------------------------------------
  * |             Level            |   Last Value Used  |     Holes	|
  * ----------------------------------------------------------------------
- * | Module Init and Probe        |       0x0125       | 0x4b,0xba,0xfa |
+ * | Module Init and Probe        |       0x0126       | 0x4b,0xba,0xfa |
  * | Mailbox commands             |       0x114f       | 0x111a-0x111b  |
  * |                              |                    | 0x112c-0x112e  |
  * |                              |                    | 0x113a         |

drivers/scsi/qla2xxx/qla_def.h

@@ -253,8 +253,8 @@
 #define LOOP_DOWN_TIME			255	/* 240 */
 #define	LOOP_DOWN_RESET			(LOOP_DOWN_TIME - 30)
 
-/* Maximum outstanding commands in ISP queues (1-65535) */
-#define MAX_OUTSTANDING_COMMANDS	1024
+#define DEFAULT_OUTSTANDING_COMMANDS	1024
+#define MIN_OUTSTANDING_COMMANDS	128
 
 /* ISP request and response entry counts (37-65535) */
 #define REQUEST_ENTRY_CNT_2100		128	/* Number of request entries. */
@@ -2533,8 +2533,9 @@ struct req_que {
 	uint16_t  qos;
 	uint16_t  vp_idx;
 	struct rsp_que *rsp;
-	srb_t *outstanding_cmds[MAX_OUTSTANDING_COMMANDS];
+	srb_t **outstanding_cmds;
 	uint32_t current_outstanding_cmd;
+	uint16_t num_outstanding_cmds;
 	int max_q_depth;
 };
 
@@ -2561,7 +2562,7 @@ struct qlt_hw_data {
 	void *target_lport_ptr;
 	struct qla_tgt_func_tmpl *tgt_ops;
 	struct qla_tgt *qla_tgt;
-	struct qla_tgt_cmd *cmds[MAX_OUTSTANDING_COMMANDS];
+	struct qla_tgt_cmd *cmds[DEFAULT_OUTSTANDING_COMMANDS];
 	uint16_t current_handle;
 
 	struct qla_tgt_vp_map *tgt_vp_map;
@@ -2887,6 +2888,7 @@ struct qla_hw_data {
 #define RISC_START_ADDRESS_2300 0x800
 #define RISC_START_ADDRESS_2400 0x100000
 	uint16_t	fw_xcb_count;
+	uint16_t	fw_iocb_count;
 
 	uint16_t	fw_options[16];         /* slots: 1,2,3,10,11 */
 	uint8_t		fw_seriallink_options[4];
@@ -3248,8 +3250,6 @@ struct qla_tgt_vp_map {
 
 #define NVRAM_DELAY()		udelay(10)
 
-#define INVALID_HANDLE	(MAX_OUTSTANDING_COMMANDS+1)
-
 /*
  * Flash support definitions
  */

drivers/scsi/qla2xxx/qla_gbl.h

@@ -84,6 +84,9 @@ extern int qla83xx_nic_core_reset(scsi_qla_host_t *);
 extern void qla83xx_reset_ownership(scsi_qla_host_t *);
 extern int qla2xxx_mctp_dump(scsi_qla_host_t *);
 
+extern int
+qla2x00_alloc_outstanding_cmds(struct qla_hw_data *, struct req_que *);
+
 /*
  * Global Data in qla_os.c source file.
  */

drivers/scsi/qla2xxx/qla_init.c

@@ -1559,6 +1559,47 @@ qla81xx_mpi_sync(scsi_qla_host_t *vha)
 	return rval;
 }
 
+int
+qla2x00_alloc_outstanding_cmds(struct qla_hw_data *ha, struct req_que *req)
+{
+	/* Don't try to reallocate the array */
+	if (req->outstanding_cmds)
+		return QLA_SUCCESS;
+
+	if (!IS_FWI2_CAPABLE(ha) || (ha->mqiobase &&
+	    (ql2xmultique_tag || ql2xmaxqueues > 1)))
+		req->num_outstanding_cmds = DEFAULT_OUTSTANDING_COMMANDS;
+	else {
+		if (ha->fw_xcb_count <= ha->fw_iocb_count)
+			req->num_outstanding_cmds = ha->fw_xcb_count;
+		else
+			req->num_outstanding_cmds = ha->fw_iocb_count;
+	}
+
+	req->outstanding_cmds = kzalloc(sizeof(srb_t *) *
+	    req->num_outstanding_cmds, GFP_KERNEL);
+
+	if (!req->outstanding_cmds) {
+		/*
+		 * Try to allocate a minimal size just so we can get through
+		 * initialization.
+		 */
+		req->num_outstanding_cmds = MIN_OUTSTANDING_COMMANDS;
+		req->outstanding_cmds = kzalloc(sizeof(srb_t *) *
+		    req->num_outstanding_cmds, GFP_KERNEL);
+
+		if (!req->outstanding_cmds) {
+			ql_log(ql_log_fatal, NULL, 0x0126,
+			    "Failed to allocate memory for "
+			    "outstanding_cmds for req_que %p.\n", req);
+			req->num_outstanding_cmds = 0;
+			return QLA_FUNCTION_FAILED;
+		}
+	}
+
+	return QLA_SUCCESS;
+}
+
 /**
  * qla2x00_setup_chip() - Load and start RISC firmware.
  * @ha: HA context
@@ -1628,9 +1669,18 @@ qla2x00_setup_chip(scsi_qla_host_t *vha)
 						    MIN_MULTI_ID_FABRIC - 1;
 				}
 				qla2x00_get_resource_cnts(vha, NULL,
-				    &ha->fw_xcb_count, NULL, NULL,
+				    &ha->fw_xcb_count, NULL, &ha->fw_iocb_count,
 				    &ha->max_npiv_vports, NULL);
 
+				/*
+				 * Allocate the array of outstanding commands
+				 * now that we know the firmware resources.
+				 */
+				rval = qla2x00_alloc_outstanding_cmds(ha,
+				    vha->req);
+				if (rval != QLA_SUCCESS)
+					goto failed;
+
 				if (!fw_major_version && ql2xallocfwdump
 				    && !IS_QLA82XX(ha))
 					qla2x00_alloc_fw_dump(vha);
@@ -1948,7 +1998,7 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
 		req = ha->req_q_map[que];
 		if (!req)
 			continue;
-		for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
+		for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++)
 			req->outstanding_cmds[cnt] = NULL;
 
 		req->current_outstanding_cmd = 1;

drivers/scsi/qla2xxx/qla_iocb.c

@@ -349,14 +349,14 @@ qla2x00_start_scsi(srb_t *sp)
 
 	/* Check for room in outstanding command list. */
 	handle = req->current_outstanding_cmd;
-	for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) {
+	for (index = 1; index < req->num_outstanding_cmds; index++) {
 		handle++;
-		if (handle == MAX_OUTSTANDING_COMMANDS)
+		if (handle == req->num_outstanding_cmds)
 			handle = 1;
 		if (!req->outstanding_cmds[handle])
 			break;
 	}
-	if (index == MAX_OUTSTANDING_COMMANDS)
+	if (index == req->num_outstanding_cmds)
 		goto queuing_error;
 
 	/* Map the sg table so we have an accurate count of sg entries needed */
@@ -1467,16 +1467,15 @@ qla24xx_start_scsi(srb_t *sp)
 
 	/* Check for room in outstanding command list. */
 	handle = req->current_outstanding_cmd;
-	for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) {
+	for (index = 1; index < req->num_outstanding_cmds; index++) {
 		handle++;
-		if (handle == MAX_OUTSTANDING_COMMANDS)
+		if (handle == req->num_outstanding_cmds)
 			handle = 1;
 		if (!req->outstanding_cmds[handle])
 			break;
 	}
-	if (index == MAX_OUTSTANDING_COMMANDS) {
+	if (index == req->num_outstanding_cmds)
 		goto queuing_error;
-	}
 
 	/* Map the sg table so we have an accurate count of sg entries needed */
 	if (scsi_sg_count(cmd)) {
@@ -1641,15 +1640,15 @@ qla24xx_dif_start_scsi(srb_t *sp)
 
 	/* Check for room in outstanding command list. */
 	handle = req->current_outstanding_cmd;
-	for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) {
+	for (index = 1; index < req->num_outstanding_cmds; index++) {
 		handle++;
-		if (handle == MAX_OUTSTANDING_COMMANDS)
+		if (handle == req->num_outstanding_cmds)
 			handle = 1;
 		if (!req->outstanding_cmds[handle])
 			break;
 	}
 
-	if (index == MAX_OUTSTANDING_COMMANDS)
+	if (index == req->num_outstanding_cmds)
 		goto queuing_error;
 
 	/* Compute number of required data segments */
@@ -1822,14 +1821,14 @@ qla2x00_alloc_iocbs(scsi_qla_host_t *vha, srb_t *sp)
 
 	/* Check for room in outstanding command list. */
 	handle = req->current_outstanding_cmd;
-	for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) {
+	for (index = 1; req->num_outstanding_cmds; index++) {
 		handle++;
-		if (handle == MAX_OUTSTANDING_COMMANDS)
+		if (handle == req->num_outstanding_cmds)
 			handle = 1;
 		if (!req->outstanding_cmds[handle])
 			break;
 	}
-	if (index == MAX_OUTSTANDING_COMMANDS) {
+	if (index == req->num_outstanding_cmds) {
 		ql_log(ql_log_warn, vha, 0x700b,
 		    "No room on outstanding cmd array.\n");
 		goto queuing_error;
@@ -2263,14 +2262,14 @@ qla82xx_start_scsi(srb_t *sp)
 
 	/* Check for room in outstanding command list. */
 	handle = req->current_outstanding_cmd;
-	for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) {
+	for (index = 1; index < req->num_outstanding_cmds; index++) {
 		handle++;
-		if (handle == MAX_OUTSTANDING_COMMANDS)
+		if (handle == req->num_outstanding_cmds)
 			handle = 1;
 		if (!req->outstanding_cmds[handle])
 			break;
 	}
-	if (index == MAX_OUTSTANDING_COMMANDS)
+	if (index == req->num_outstanding_cmds)
 		goto queuing_error;
 
 	/* Map the sg table so we have an accurate count of sg entries needed */
@@ -2767,15 +2766,15 @@ qla2x00_start_bidir(srb_t *sp, struct scsi_qla_host *vha, uint32_t tot_dsds)
 
 	/* Check for room in outstanding command list. */
 	handle = req->current_outstanding_cmd;
-	for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) {
+	for (index = 1; index < req->num_outstanding_cmds; index++) {
 		handle++;
-	if (handle == MAX_OUTSTANDING_COMMANDS)
+	if (handle == req->num_outstanding_cmds)
 		handle = 1;
 	if (!req->outstanding_cmds[handle])
 		break;
 	}
 
-	if (index == MAX_OUTSTANDING_COMMANDS) {
+	if (index == req->num_outstanding_cmds) {
 		rval = EXT_STATUS_BUSY;
 		goto queuing_error;
 	}

drivers/scsi/qla2xxx/qla_isr.c

@@ -1029,7 +1029,7 @@ qla2x00_process_completed_request(struct scsi_qla_host *vha,
 	struct qla_hw_data *ha = vha->hw;
 
 	/* Validate handle. */
-	if (index >= MAX_OUTSTANDING_COMMANDS) {
+	if (index >= req->num_outstanding_cmds) {
 		ql_log(ql_log_warn, vha, 0x3014,
 		    "Invalid SCSI command index (%x).\n", index);
 
@@ -1067,7 +1067,7 @@ qla2x00_get_sp_from_handle(scsi_qla_host_t *vha, const char *func,
 	uint16_t index;
 
 	index = LSW(pkt->handle);
-	if (index >= MAX_OUTSTANDING_COMMANDS) {
+	if (index >= req->num_outstanding_cmds) {
 		ql_log(ql_log_warn, vha, 0x5031,
 		    "Invalid command index (%x).\n", index);
 		if (IS_QLA82XX(ha))
@@ -1740,7 +1740,7 @@ qla25xx_process_bidir_status_iocb(scsi_qla_host_t *vha, void *pkt,
 	sts24 = (struct sts_entry_24xx *) pkt;
 
 	/* Validate handle. */
-	if (index >= MAX_OUTSTANDING_COMMANDS) {
+	if (index >= req->num_outstanding_cmds) {
 		ql_log(ql_log_warn, vha, 0x70af,
 		    "Invalid SCSI completion handle 0x%x.\n", index);
 		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
@@ -1910,9 +1910,9 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 	req = ha->req_q_map[que];
 
 	/* Validate handle. */
-	if (handle < MAX_OUTSTANDING_COMMANDS) {
+	if (handle < req->num_outstanding_cmds)
 		sp = req->outstanding_cmds[handle];
-	} else
+	else
 		sp = NULL;
 
 	if (sp == NULL) {

drivers/scsi/qla2xxx/qla_mbx.c

@@ -900,13 +900,13 @@ qla2x00_abort_command(srb_t *sp)
 	    "Entered %s.\n", __func__);
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
-	for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
+	for (handle = 1; handle < req->num_outstanding_cmds; handle++) {
 		if (req->outstanding_cmds[handle] == sp)
 			break;
 	}
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
-	if (handle == MAX_OUTSTANDING_COMMANDS) {
+	if (handle == req->num_outstanding_cmds) {
 		/* command not found */
 		return QLA_FUNCTION_FAILED;
 	}
@@ -2535,12 +2535,12 @@ qla24xx_abort_command(srb_t *sp)
 	    "Entered %s.\n", __func__);
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
-	for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
+	for (handle = 1; handle < req->num_outstanding_cmds; handle++) {
 		if (req->outstanding_cmds[handle] == sp)
 			break;
 	}
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
-	if (handle == MAX_OUTSTANDING_COMMANDS) {
+	if (handle == req->num_outstanding_cmds) {
 		/* Command not found. */
 		return QLA_FUNCTION_FAILED;
 	}

drivers/scsi/qla2xxx/qla_mid.c

@@ -523,6 +523,7 @@ qla25xx_free_req_que(struct scsi_qla_host *vha, struct req_que *req)
 		clear_bit(que_id, ha->req_qid_map);
 		mutex_unlock(&ha->vport_lock);
 	}
+	kfree(req->outstanding_cmds);
 	kfree(req);
 	req = NULL;
 }
@@ -649,6 +650,10 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
 		goto que_failed;
 	}
 
+	ret = qla2x00_alloc_outstanding_cmds(ha, req);
+	if (ret != QLA_SUCCESS)
+		goto que_failed;
+
 	mutex_lock(&ha->vport_lock);
 	que_id = find_first_zero_bit(ha->req_qid_map, ha->max_req_queues);
 	if (que_id >= ha->max_req_queues) {
@@ -685,7 +690,7 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
 	    "options=0x%x.\n", req->options);
 	ql_dbg(ql_dbg_init, base_vha, 0x00dd,
 	    "options=0x%x.\n", req->options);
-	for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
+	for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++)
 		req->outstanding_cmds[cnt] = NULL;
 	req->current_outstanding_cmd = 1;
 

drivers/scsi/qla2xxx/qla_nx.c

@@ -3629,7 +3629,7 @@ qla82xx_chip_reset_cleanup(scsi_qla_host_t *vha)
 			req = ha->req_q_map[que];
 			if (!req)
 				continue;
-			for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+			for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) {
 				sp = req->outstanding_cmds[cnt];
 				if (sp) {
 					if (!sp->u.scmd.ctx ||

drivers/scsi/qla2xxx/qla_os.c

@@ -360,6 +360,9 @@ static void qla2x00_free_req_que(struct qla_hw_data *ha, struct req_que *req)
 		(req->length + 1) * sizeof(request_t),
 		req->ring, req->dma);
 
+	if (req)
+		kfree(req->outstanding_cmds);
+
 	kfree(req);
 	req = NULL;
 }
@@ -1010,7 +1013,7 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *vha, unsigned int t,
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 	req = vha->req;
 	for (cnt = 1; status == QLA_SUCCESS &&
-		cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+		cnt < req->num_outstanding_cmds; cnt++) {
 		sp = req->outstanding_cmds[cnt];
 		if (!sp)
 			continue;
@@ -1337,7 +1340,9 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res)
 		req = ha->req_q_map[que];
 		if (!req)
 			continue;
-		for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+		if (!req->outstanding_cmds)
+			continue;
+		for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) {
 			sp = req->outstanding_cmds[cnt];
 			if (sp) {
 				req->outstanding_cmds[cnt] = NULL;
@@ -4733,7 +4738,7 @@ qla2x00_timer(scsi_qla_host_t *vha)
 				    cpu_flags);
 				req = ha->req_q_map[0];
 				for (index = 1;
-				    index < MAX_OUTSTANDING_COMMANDS;
+				    index < req->num_outstanding_cmds;
 				    index++) {
 					fc_port_t *sfcp;
 

drivers/scsi/qla2xxx/qla_target.c

@@ -1570,7 +1570,7 @@ static inline uint32_t qlt_make_handle(struct scsi_qla_host *vha)
 	/* always increment cmd handle */
 	do {
 		++h;
-		if (h > MAX_OUTSTANDING_COMMANDS)
+		if (h > DEFAULT_OUTSTANDING_COMMANDS)
 			h = 1; /* 0 is QLA_TGT_NULL_HANDLE */
 		if (h == ha->tgt.current_handle) {
 			ql_dbg(ql_dbg_tgt, vha, 0xe04e,
@@ -2441,7 +2441,7 @@ static struct qla_tgt_cmd *qlt_ctio_to_cmd(struct scsi_qla_host *vha,
 			return NULL;
 		}
 		/* handle-1 is actually used */
-		if (unlikely(handle > MAX_OUTSTANDING_COMMANDS)) {
+		if (unlikely(handle > DEFAULT_OUTSTANDING_COMMANDS)) {
 			ql_dbg(ql_dbg_tgt, vha, 0xe052,
 			    "qla_target(%d): Wrong handle %x received\n",
 			    vha->vp_idx, handle);

drivers/scsi/qla2xxx/qla_target.h

@@ -60,8 +60,9 @@
  * multi-complete should come to the tgt driver or be handled there by qla2xxx
  */
 #define CTIO_COMPLETION_HANDLE_MARK	BIT_29
-#if (CTIO_COMPLETION_HANDLE_MARK <= MAX_OUTSTANDING_COMMANDS)
-#error "CTIO_COMPLETION_HANDLE_MARK not larger than MAX_OUTSTANDING_COMMANDS"
+#if (CTIO_COMPLETION_HANDLE_MARK <= DEFAULT_OUTSTANDING_COMMANDS)
+#error "CTIO_COMPLETION_HANDLE_MARK not larger than "
+	"DEFAULT_OUTSTANDING_COMMANDS"
 #endif
 #define HANDLE_IS_CTIO_COMP(h) (h & CTIO_COMPLETION_HANDLE_MARK)