dt-bindings: iio: imu: use spi-peripheral-props.yaml

Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema.  This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.

Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.

While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816124321.67817-8-krzysztof.kozlowski@linaro.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml

@@ -25,8 +25,6 @@ properties:
 
   spi-cpol: true
 
-  spi-max-frequency: true
-
   interrupts:
     maxItems: 1
 
@@ -35,7 +33,10 @@ required:
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml

@@ -47,8 +47,6 @@ properties:
         - DIO3
         - DIO4
 
-  spi-max-frequency: true
-
   spi-cpha: true
   spi-cpol: true
 
@@ -96,8 +94,6 @@ properties:
       - DIO3
       - DIO4
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
@@ -106,6 +102,11 @@ required:
   - spi-cpol
   - spi-max-frequency
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>

Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml

@@ -46,13 +46,14 @@ properties:
   mount-matrix:
     description: an optional 3x3 mounting rotation matrix
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml

@@ -47,7 +47,6 @@ properties:
   vddio-supply:
     description: Regulator that provides power to the bus
 
-  spi-max-frequency: true
   spi-cpha: true
   spi-cpol: true
 
@@ -56,7 +55,10 @@ required:
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml

@@ -40,8 +40,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdd-supply: true
   vddio-supply: true
 
@@ -54,6 +52,7 @@ properties:
       These devices also support an auxiliary i2c bus via an i2c-gate.
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       not:
         properties:
@@ -67,7 +66,7 @@ allOf:
       properties:
         i2c-gate: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible

Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml

@@ -36,13 +36,14 @@ properties:
   drive-open-drain:
     type: boolean
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml

@@ -45,8 +45,6 @@ properties:
     description:
       Supports up to 2 interrupt lines via the INT1 and INT2 pins.
 
-  spi-max-frequency: true
-
   vdd-supply:
     description: if defined provides VDD power to the sensor.
 
@@ -81,12 +79,15 @@ properties:
   wakeup-source:
     $ref: /schemas/types.yaml#/definitions/flag
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>