powerpc/pci: Don't keep ISA memory hole resources in the tree

When we have an ISA memory hole (ie, a PCI window that allows us to
generate PCI memory cycles at low PCI address) mixed with other
resources using a different CPU <=> PCI mapping, we must not keep
the ISA hole in the bridge resource list.

If we do, things might start trying to allocate device resources
in there and will get the PCI addresses wrong.

This fixes it by arranging to remove the ISA memory hole resource in
this case.  This fixes various cases of PCMCIA breakage on PowerBooks
using the MPC106 "grackle" bridge.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/powerpc/kernel/pci-common.c

@@ -650,11 +650,18 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
 		}
 	}
 
-	/* Out of paranoia, let's put the ISA hole last if any */
-	if (isa_hole >= 0 && memno > 0 && isa_hole != (memno-1)) {
-		struct resource tmp = hose->mem_resources[isa_hole];
-		hose->mem_resources[isa_hole] = hose->mem_resources[memno-1];
-		hose->mem_resources[memno-1] = tmp;
+	/* If there's an ISA hole and the pci_mem_offset is -not- matching
+	 * the ISA hole offset, then we need to remove the ISA hole from
+	 * the resource list for that brige
+	 */
+	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
+		unsigned int next = isa_hole + 1;
+		printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb);
+		if (next < memno)
+			memmove(&hose->mem_resources[isa_hole],
+				&hose->mem_resources[next],
+				sizeof(struct resource) * (memno - next));
+		hose->mem_resources[--memno].flags = 0;
 	}
 }