serial: sh-sci: Convert from old SCSR control flags to common defines.

Many of these flags were duplicated, and as we now need this visibility
to set them from the platform code, we can just use the linux/serial_sci.h
variants instead.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

drivers/serial/sh-sci.c

@@ -376,9 +376,9 @@ static void sci_transmit_chars(struct uart_port *port)
 	if (!(status & SCxSR_TDxE(port))) {
 		ctrl = sci_in(port, SCSCR);
 		if (uart_circ_empty(xmit))
-			ctrl &= ~SCI_CTRL_FLAGS_TIE;
+			ctrl &= ~SCSCR_TIE;
 		else
-			ctrl |= SCI_CTRL_FLAGS_TIE;
+			ctrl |= SCSCR_TIE;
 		sci_out(port, SCSCR, ctrl);
 		return;
 	}
@@ -420,7 +420,7 @@ static void sci_transmit_chars(struct uart_port *port)
 			sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
 		}
 
-		ctrl |= SCI_CTRL_FLAGS_TIE;
+		ctrl |= SCSCR_TIE;
 		sci_out(port, SCSCR, ctrl);
 	}
 }
@@ -721,16 +721,16 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 	scr_status = sci_in(port, SCSCR);
 
 	/* Tx Interrupt */
-	if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE))
+	if ((ssr_status & 0x0020) && (scr_status & SCSCR_TIE))
 		ret = sci_tx_interrupt(irq, ptr);
 	/* Rx Interrupt */
-	if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE))
+	if ((ssr_status & 0x0002) && (scr_status & SCSCR_RIE))
 		ret = sci_rx_interrupt(irq, ptr);
 	/* Error Interrupt */
-	if ((ssr_status & 0x0080) && (scr_status & SCI_CTRL_FLAGS_REIE))
+	if ((ssr_status & 0x0080) && (scr_status & SCSCR_REIE))
 		ret = sci_er_interrupt(irq, ptr);
 	/* Break Interrupt */
-	if ((ssr_status & 0x0010) && (scr_status & SCI_CTRL_FLAGS_REIE))
+	if ((ssr_status & 0x0010) && (scr_status & SCSCR_REIE))
 		ret = sci_br_interrupt(irq, ptr);
 
 	return ret;
@@ -861,7 +861,7 @@ static void sci_start_tx(struct uart_port *port)
 
 	/* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
 	ctrl = sci_in(port, SCSCR);
-	ctrl |= SCI_CTRL_FLAGS_TIE;
+	ctrl |= SCSCR_TIE;
 	sci_out(port, SCSCR, ctrl);
 }
 
@@ -871,7 +871,7 @@ static void sci_stop_tx(struct uart_port *port)
 
 	/* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
 	ctrl = sci_in(port, SCSCR);
-	ctrl &= ~SCI_CTRL_FLAGS_TIE;
+	ctrl &= ~SCSCR_TIE;
 	sci_out(port, SCSCR, ctrl);
 }
 
@@ -881,7 +881,7 @@ static void sci_start_rx(struct uart_port *port, unsigned int tty_start)
 
 	/* Set RIE (Receive Interrupt Enable) bit in SCSCR */
 	ctrl = sci_in(port, SCSCR);
-	ctrl |= SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE;
+	ctrl |= SCSCR_RIE | SCSCR_REIE;
 	sci_out(port, SCSCR, ctrl);
 }
 
@@ -891,7 +891,7 @@ static void sci_stop_rx(struct uart_port *port)
 
 	/* Clear RIE (Receive Interrupt Enable) bit in SCSCR */
 	ctrl = sci_in(port, SCSCR);
-	ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE);
+	ctrl &= ~(SCSCR_RIE | SCSCR_REIE);
 	sci_out(port, SCSCR, ctrl);
 }
 

drivers/serial/sh-sci.h

@@ -138,32 +138,6 @@
 # error CPU subtype not defined
 #endif
 
-/* SCSCR */
-#define SCI_CTRL_FLAGS_TIE  0x80 /* all */
-#define SCI_CTRL_FLAGS_RIE  0x40 /* all */
-#define SCI_CTRL_FLAGS_TE   0x20 /* all */
-#define SCI_CTRL_FLAGS_RE   0x10 /* all */
-#if defined(CONFIG_CPU_SUBTYPE_SH7750)  || \
-    defined(CONFIG_CPU_SUBTYPE_SH7091)  || \
-    defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7722)  || \
-    defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7751)  || \
-    defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7763)  || \
-    defined(CONFIG_CPU_SUBTYPE_SH7780)  || \
-    defined(CONFIG_CPU_SUBTYPE_SH7785)  || \
-    defined(CONFIG_CPU_SUBTYPE_SH7786)  || \
-    defined(CONFIG_CPU_SUBTYPE_SHX3)
-#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */
-#else
-#define SCI_CTRL_FLAGS_REIE 0
-#endif
-/*      SCI_CTRL_FLAGS_MPIE 0x08  * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
-/*      SCI_CTRL_FLAGS_TEIE 0x04  * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
-/*      SCI_CTRL_FLAGS_CKE1 0x02  * all */
-/*      SCI_CTRL_FLAGS_CKE0 0x01  * 7707 SCI/SCIF, 7708 SCI, 7709 SCI/SCIF, 7750 SCI */
-
 /* SCxSR SCI */
 #define SCI_TDRE  0x80 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
 #define SCI_RDRF  0x40 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */