scsi: smartpqi: Reporting unhandled SCSI errors

When a HARDWARE_ERROR is triggered for ASC=0x3e, the existing code is only
considering the case where ASCQ=0x1.

According to the http://www.t10.org/lists/asc-num.htm#ASC_3E specification,
other values may occur like a timeout (ASCQ=0x2).

This patch prints an error message when a non-handled message is received.
This can help diagnose a possible misbehavior of the controller or a
missing implementation in the Linux kernel.

This patch keeps the exact same error handling but prints a message if an
ASCQ != 1 is reported.

[mkp: clarified commit message]
Signed-off-by: Erwan Velu <e.velu@criteo.com>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/smartpqi/smartpqi_init.c

@@ -2755,16 +2755,25 @@ static void pqi_process_raid_io_error(struct pqi_io_request *io_request)
 			scsi_normalize_sense(error_info->data,
 				sense_data_length, &sshdr) &&
 				sshdr.sense_key == HARDWARE_ERROR &&
-				sshdr.asc == 0x3e &&
-				sshdr.ascq == 0x1) {
+				sshdr.asc == 0x3e) {
 			struct pqi_ctrl_info *ctrl_info = shost_to_hba(scmd->device->host);
 			struct pqi_scsi_dev *device = scmd->device->hostdata;
 
-			if (printk_ratelimit())
-				scmd_printk(KERN_ERR, scmd, "received 'logical unit failure' from controller for scsi %d:%d:%d:%d\n",
-					ctrl_info->scsi_host->host_no, device->bus, device->target, device->lun);
-			pqi_take_device_offline(scmd->device, "RAID");
-			host_byte = DID_NO_CONNECT;
+			switch (sshdr.ascq) {
+			case 0x1: /* LOGICAL UNIT FAILURE */
+				if (printk_ratelimit())
+					scmd_printk(KERN_ERR, scmd, "received 'logical unit failure' from controller for scsi %d:%d:%d:%d\n",
+						ctrl_info->scsi_host->host_no, device->bus, device->target, device->lun);
+				pqi_take_device_offline(scmd->device, "RAID");
+				host_byte = DID_NO_CONNECT;
+				break;
+
+			default: /* See http://www.t10.org/lists/asc-num.htm#ASC_3E */
+				if (printk_ratelimit())
+					scmd_printk(KERN_ERR, scmd, "received unhandled error %d from controller for scsi %d:%d:%d:%d\n",
+						sshdr.ascq, ctrl_info->scsi_host->host_no, device->bus, device->target, device->lun);
+				break;
+			}
 		}
 
 		if (sense_data_length > SCSI_SENSE_BUFFERSIZE)