Commit 8ef9dc0f authored by Josef Bacik's avatar Josef Bacik Committed by David Sterba

btrfs: do not take the uuid_mutex in btrfs_rm_device

We got the following lockdep splat while running fstests (specifically
btrfs/003 and btrfs/020 in a row) with the new rc.  This was uncovered
by 87579e9b ("loop: use worker per cgroup instead of kworker") which
converted loop to using workqueues, which comes with lockdep
annotations that don't exist with kworkers.  The lockdep splat is as
follows:

  WARNING: possible circular locking dependency detected
  5.14.0-rc2-custom+ #34 Not tainted
  ------------------------------------------------------
  losetup/156417 is trying to acquire lock:
  ffff9c7645b02d38 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x84/0x600

  but task is already holding lock:
  ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop]

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #5 (&lo->lo_mutex){+.+.}-{3:3}:
	 __mutex_lock+0xba/0x7c0
	 lo_open+0x28/0x60 [loop]
	 blkdev_get_whole+0x28/0xf0
	 blkdev_get_by_dev.part.0+0x168/0x3c0
	 blkdev_open+0xd2/0xe0
	 do_dentry_open+0x163/0x3a0
	 path_openat+0x74d/0xa40
	 do_filp_open+0x9c/0x140
	 do_sys_openat2+0xb1/0x170
	 __x64_sys_openat+0x54/0x90
	 do_syscall_64+0x3b/0x90
	 entry_SYSCALL_64_after_hwframe+0x44/0xae

  -> #4 (&disk->open_mutex){+.+.}-{3:3}:
	 __mutex_lock+0xba/0x7c0
	 blkdev_get_by_dev.part.0+0xd1/0x3c0
	 blkdev_get_by_path+0xc0/0xd0
	 btrfs_scan_one_device+0x52/0x1f0 [btrfs]
	 btrfs_control_ioctl+0xac/0x170 [btrfs]
	 __x64_sys_ioctl+0x83/0xb0
	 do_syscall_64+0x3b/0x90
	 entry_SYSCALL_64_after_hwframe+0x44/0xae

  -> #3 (uuid_mutex){+.+.}-{3:3}:
	 __mutex_lock+0xba/0x7c0
	 btrfs_rm_device+0x48/0x6a0 [btrfs]
	 btrfs_ioctl+0x2d1c/0x3110 [btrfs]
	 __x64_sys_ioctl+0x83/0xb0
	 do_syscall_64+0x3b/0x90
	 entry_SYSCALL_64_after_hwframe+0x44/0xae

  -> #2 (sb_writers#11){.+.+}-{0:0}:
	 lo_write_bvec+0x112/0x290 [loop]
	 loop_process_work+0x25f/0xcb0 [loop]
	 process_one_work+0x28f/0x5d0
	 worker_thread+0x55/0x3c0
	 kthread+0x140/0x170
	 ret_from_fork+0x22/0x30

  -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}:
	 process_one_work+0x266/0x5d0
	 worker_thread+0x55/0x3c0
	 kthread+0x140/0x170
	 ret_from_fork+0x22/0x30

  -> #0 ((wq_completion)loop0){+.+.}-{0:0}:
	 __lock_acquire+0x1130/0x1dc0
	 lock_acquire+0xf5/0x320
	 flush_workqueue+0xae/0x600
	 drain_workqueue+0xa0/0x110
	 destroy_workqueue+0x36/0x250
	 __loop_clr_fd+0x9a/0x650 [loop]
	 lo_ioctl+0x29d/0x780 [loop]
	 block_ioctl+0x3f/0x50
	 __x64_sys_ioctl+0x83/0xb0
	 do_syscall_64+0x3b/0x90
	 entry_SYSCALL_64_after_hwframe+0x44/0xae

  other info that might help us debug this:
  Chain exists of:
    (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex
   Possible unsafe locking scenario:
	 CPU0                    CPU1
	 ----                    ----
    lock(&lo->lo_mutex);
				 lock(&disk->open_mutex);
				 lock(&lo->lo_mutex);
    lock((wq_completion)loop0);

   *** DEADLOCK ***
  1 lock held by losetup/156417:
   #0: ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop]

  stack backtrace:
  CPU: 8 PID: 156417 Comm: losetup Not tainted 5.14.0-rc2-custom+ #34
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  Call Trace:
   dump_stack_lvl+0x57/0x72
   check_noncircular+0x10a/0x120
   __lock_acquire+0x1130/0x1dc0
   lock_acquire+0xf5/0x320
   ? flush_workqueue+0x84/0x600
   flush_workqueue+0xae/0x600
   ? flush_workqueue+0x84/0x600
   drain_workqueue+0xa0/0x110
   destroy_workqueue+0x36/0x250
   __loop_clr_fd+0x9a/0x650 [loop]
   lo_ioctl+0x29d/0x780 [loop]
   ? __lock_acquire+0x3a0/0x1dc0
   ? update_dl_rq_load_avg+0x152/0x360
   ? lock_is_held_type+0xa5/0x120
   ? find_held_lock.constprop.0+0x2b/0x80
   block_ioctl+0x3f/0x50
   __x64_sys_ioctl+0x83/0xb0
   do_syscall_64+0x3b/0x90
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  RIP: 0033:0x7f645884de6b

Usually the uuid_mutex exists to protect the fs_devices that map
together all of the devices that match a specific uuid.  In rm_device
we're messing with the uuid of a device, so it makes sense to protect
that here.

However in doing that it pulls in a whole host of lockdep dependencies,
as we call mnt_may_write() on the sb before we grab the uuid_mutex, thus
we end up with the dependency chain under the uuid_mutex being added
under the normal sb write dependency chain, which causes problems with
loop devices.

We don't need the uuid mutex here however.  If we call
btrfs_scan_one_device() before we scratch the super block we will find
the fs_devices and not find the device itself and return EBUSY because
the fs_devices is open.  If we call it after the scratch happens it will
not appear to be a valid btrfs file system.

We do not need to worry about other fs_devices modifying operations here
because we're protected by the exclusive operations locking.

So drop the uuid_mutex here in order to fix the lockdep splat.

A more detailed explanation from the discussion:

We are worried about rm and scan racing with each other, before this
change we'll zero the device out under the UUID mutex so when scan does
run it'll make sure that it can go through the whole device scan thing
without rm messing with us.

We aren't worried if the scratch happens first, because the result is we
don't think this is a btrfs device and we bail out.

The only case we are concerned with is we scratch _after_ scan is able
to read the superblock and gets a seemingly valid super block, so lets
consider this case.

Scan will call device_list_add() with the device we're removing.  We'll
call find_fsid_with_metadata_uuid() and get our fs_devices for this
UUID.  At this point we lock the fs_devices->device_list_mutex.  This is
what protects us in this case, but we have two cases here.

1. We aren't to the device removal part of the RM.  We found our device,
   and device name matches our path, we go down and we set total_devices
   to our super number of devices, which doesn't affect anything because
   we haven't done the remove yet.

2. We are past the device removal part, which is protected by the
   device_list_mutex.  Scan doesn't find the device, it goes down and
   does the

   if (fs_devices->opened)
	   return -EBUSY;

   check and we bail out.

Nothing about this situation is ideal, but the lockdep splat is real,
and the fix is safe, tho admittedly a bit scary looking.
Reviewed-by: default avatarAnand Jain <anand.jain@oracle.com>
Signed-off-by: default avatarJosef Bacik <josef@toxicpanda.com>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
[ copy more from the discussion ]
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
parent c3a3b19b
......@@ -2081,8 +2081,11 @@ int btrfs_rm_device(struct btrfs_fs_info *fs_info, const char *device_path,
u64 num_devices;
int ret = 0;
mutex_lock(&uuid_mutex);
/*
* The device list in fs_devices is accessed without locks (neither
* uuid_mutex nor device_list_mutex) as it won't change on a mounted
* filesystem and another device rm cannot run.
*/
num_devices = btrfs_num_devices(fs_info);
ret = btrfs_check_raid_min_devices(fs_info, num_devices - 1);
......@@ -2126,11 +2129,9 @@ int btrfs_rm_device(struct btrfs_fs_info *fs_info, const char *device_path,
mutex_unlock(&fs_info->chunk_mutex);
}
mutex_unlock(&uuid_mutex);
ret = btrfs_shrink_device(device, 0);
if (!ret)
btrfs_reada_remove_dev(device);
mutex_lock(&uuid_mutex);
if (ret)
goto error_undo;
......@@ -2217,7 +2218,6 @@ int btrfs_rm_device(struct btrfs_fs_info *fs_info, const char *device_path,
}
out:
mutex_unlock(&uuid_mutex);
return ret;
error_undo:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment