brcmfmac: Split brcmf_sdiod_buffrw function up.

This function needs to be split up into separate read / write variants
for clarity.
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c

@@ -414,8 +414,8 @@ void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
 		*ret = retval;
 }
 
-static int brcmf_sdiod_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
-			     bool write, u32 addr, struct sk_buff *pkt)
+static int brcmf_sdiod_buff_read(struct brcmf_sdio_dev *sdiodev, uint fn,
+				 u32 addr, struct sk_buff *pkt)
 {
 	unsigned int req_sz;
 	int err;
@@ -424,18 +424,36 @@ static int brcmf_sdiod_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
 	req_sz = pkt->len + 3;
 	req_sz &= (uint)~3;
 
-	if (write)
-		err = sdio_memcpy_toio(sdiodev->func[fn], addr,
-				       ((u8 *)(pkt->data)), req_sz);
-	else if (fn == 1)
-		err = sdio_memcpy_fromio(sdiodev->func[fn], ((u8 *)(pkt->data)),
-					 addr, req_sz);
+	if (fn == 1)
+		err = sdio_memcpy_fromio(sdiodev->func[fn],
+					 ((u8 *)(pkt->data)), addr, req_sz);
 	else
 		/* function 2 read is FIFO operation */
-		err = sdio_readsb(sdiodev->func[fn], ((u8 *)(pkt->data)), addr,
-				  req_sz);
+		err = sdio_readsb(sdiodev->func[fn],
+				  ((u8 *)(pkt->data)), addr, req_sz);
+
+	if (err == -ENOMEDIUM)
+		brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM);
+
+	return err;
+}
+
+static int brcmf_sdiod_buff_write(struct brcmf_sdio_dev *sdiodev, uint fn,
+				  u32 addr, struct sk_buff *pkt)
+{
+	unsigned int req_sz;
+	int err;
+
+	/* Single skb use the standard mmc interface */
+	req_sz = pkt->len + 3;
+	req_sz &= (uint)~3;
+
+	err = sdio_memcpy_toio(sdiodev->func[fn], addr,
+			       ((u8 *)(pkt->data)), req_sz);
+
 	if (err == -ENOMEDIUM)
 		brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM);
+
 	return err;
 }
 
@@ -643,7 +661,7 @@ int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt)
 	if (err)
 		goto done;
 
-	err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr, pkt);
+	err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr, pkt);
 
 done:
 	return err;
@@ -665,14 +683,14 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
 		goto done;
 
 	if (pktq->qlen == 1)
-		err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr,
-					 pktq->next);
+		err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr,
+					    pktq->next);
 	else if (!sdiodev->sg_support) {
 		glom_skb = brcmu_pkt_buf_get_skb(totlen);
 		if (!glom_skb)
 			return -ENOMEM;
-		err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr,
-					 glom_skb);
+		err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr,
+					    glom_skb);
 		if (err)
 			goto done;
 
@@ -707,8 +725,7 @@ int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
 	err = brcmf_sdiod_addrprep(sdiodev, &addr);
 
 	if (!err)
-		err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, true, addr,
-					 mypkt);
+		err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2, addr, mypkt);
 
 	brcmu_pkt_buf_free_skb(mypkt);
 	return err;
@@ -730,8 +747,8 @@ int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
 
 	if (pktq->qlen == 1 || !sdiodev->sg_support)
 		skb_queue_walk(pktq, skb) {
-			err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, true,
-						 addr, skb);
+			err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2,
+						     addr, skb);
 			if (err)
 				break;
 		}
@@ -783,10 +800,16 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 		sdaddr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
 
 		skb_put(pkt, dsize);
-		if (write)
+
+		if (write) {
 			memcpy(pkt->data, data, dsize);
-		err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_1, write, sdaddr,
-					 pkt);
+			err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_1,
+						     sdaddr, pkt);
+		} else {
+			err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_1,
+						    sdaddr, pkt);
+		}
+
 		if (err) {
 			brcmf_err("membytes transfer failed\n");
 			break;