Commit 8f3f3eb7 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: me4000: only enable PLX interrupt if we have and irq

Currently me4000_reset() always enables the PLX interrupt. Move the
enable of the interrupt into me4000_auto_attach() and only do the
enable if we actually have and irq.

Make sure the PLX interrupt is disabled in me4000_reset() before we
try to request the irq.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent b047d9cc
...@@ -412,7 +412,10 @@ static void me4000_reset(struct comedi_device *dev) ...@@ -412,7 +412,10 @@ static void me4000_reset(struct comedi_device *dev)
unsigned int val; unsigned int val;
int chan; int chan;
/* Make a hardware reset */ /* Disable interrupts on the PLX */
outl(0, devpriv->plx_regbase + PLX9052_INTCSR);
/* Software reset the PLX */
val = inl(devpriv->plx_regbase + PLX9052_CNTRL); val = inl(devpriv->plx_regbase + PLX9052_CNTRL);
val |= PLX9052_CNTRL_PCI_RESET; val |= PLX9052_CNTRL_PCI_RESET;
outl(val, devpriv->plx_regbase + PLX9052_CNTRL); outl(val, devpriv->plx_regbase + PLX9052_CNTRL);
...@@ -430,11 +433,6 @@ static void me4000_reset(struct comedi_device *dev) ...@@ -430,11 +433,6 @@ static void me4000_reset(struct comedi_device *dev)
for (chan = 0; chan < 4; chan++) for (chan = 0; chan < 4; chan++)
outl(val, dev->iobase + ME4000_AO_CTRL_REG(chan)); outl(val, dev->iobase + ME4000_AO_CTRL_REG(chan));
/* Enable interrupts on the PLX */
outl(PLX9052_INTCSR_LI1ENAB |
PLX9052_INTCSR_LI1POL |
PLX9052_INTCSR_PCIENAB, devpriv->plx_regbase + PLX9052_INTCSR);
/* Set the adustment register for AO demux */ /* Set the adustment register for AO demux */
outl(ME4000_AO_DEMUX_ADJUST_VALUE, outl(ME4000_AO_DEMUX_ADJUST_VALUE,
dev->iobase + ME4000_AO_DEMUX_ADJUST_REG); dev->iobase + ME4000_AO_DEMUX_ADJUST_REG);
...@@ -1181,8 +1179,14 @@ static int me4000_auto_attach(struct comedi_device *dev, ...@@ -1181,8 +1179,14 @@ static int me4000_auto_attach(struct comedi_device *dev,
if (pcidev->irq > 0) { if (pcidev->irq > 0) {
result = request_irq(pcidev->irq, me4000_ai_isr, IRQF_SHARED, result = request_irq(pcidev->irq, me4000_ai_isr, IRQF_SHARED,
dev->board_name, dev); dev->board_name, dev);
if (result == 0) if (result == 0) {
dev->irq = pcidev->irq; dev->irq = pcidev->irq;
/* Enable interrupts on the PLX */
outl(PLX9052_INTCSR_LI1ENAB | PLX9052_INTCSR_LI1POL |
PLX9052_INTCSR_PCIENAB,
devpriv->plx_regbase + PLX9052_INTCSR);
}
} }
result = comedi_alloc_subdevices(dev, 4); result = comedi_alloc_subdevices(dev, 4);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment