Commit 8fa5960f authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'media/v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

 - fix a regression at the CEC adapter core

 - two uAPI patches (one revert) for changes in this development cycle

* tag 'media/v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: dt-bindings: media: imx274: Convert to json-schema
  media: media/v4l2: remove V4L2_FLAG_MEMORY_NON_CONSISTENT flag
  media: cec-adap.c: don't use flush_scheduled_work()
parents 9ef7dce5 d0254f82
* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor
The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with
an active array size of 3864H x 2202V. It is programmable through I2C
interface. The I2C address is fixed to 0x1a as per sensor data sheet.
Image data is sent through MIPI CSI-2, which is configured as 4 lanes
at 1440 Mbps.
Required Properties:
- compatible: value should be "sony,imx274" for imx274 sensor
- reg: I2C bus address of the device
Optional Properties:
- reset-gpios: Sensor reset GPIO
- clocks: Reference to the input clock.
- clock-names: Should be "inck".
- VANA-supply: Sensor 2.8v analog supply.
- VDIG-supply: Sensor 1.8v digital core supply.
- VDDL-supply: Sensor digital IO 1.2v supply.
The imx274 device node should contain one 'port' child node with
an 'endpoint' subnode. For further reading on port node refer to
Documentation/devicetree/bindings/media/video-interfaces.txt.
Example:
sensor@1a {
compatible = "sony,imx274";
reg = <0x1a>;
#address-cells = <1>;
#size-cells = <0>;
reset-gpios = <&gpio_sensor 0 0>;
port {
sensor_out: endpoint {
remote-endpoint = <&csiss_in>;
};
};
};
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/sony,imx274.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Sony 1/2.5-Inch 8.51MP CMOS Digital Image Sensor
maintainers:
- Leon Luo <leonl@leopardimaging.com>
description: |
The Sony IMX274 is a 1/2.5-inch CMOS active pixel digital image sensor with an
active array size of 3864H x 2202V. It is programmable through I2C interface.
Image data is sent through MIPI CSI-2, which is configured as 4 lanes at 1440
Mbps.
properties:
compatible:
const: sony,imx274
reg:
const: 0x1a
reset-gpios:
maxItems: 1
clocks:
maxItems: 1
clock-names:
const: inck
vana-supply:
description: Sensor 2.8 V analog supply.
maxItems: 1
vdig-supply:
description: Sensor 1.8 V digital core supply.
maxItems: 1
vddl-supply:
description: Sensor digital IO 1.2 V supply.
maxItems: 1
port:
type: object
description: Output video port. See ../video-interfaces.txt.
required:
- compatible
- reg
- port
additionalProperties: false
examples:
- |
i2c0 {
#address-cells = <1>;
#size-cells = <0>;
imx274: camera-sensor@1a {
compatible = "sony,imx274";
reg = <0x1a>;
reset-gpios = <&gpio_sensor 0 0>;
port {
sensor_out: endpoint {
remote-endpoint = <&csiss_in>;
};
};
};
};
...
......@@ -701,23 +701,6 @@ Memory Consistency Flags
:stub-columns: 0
:widths: 3 1 4
* .. _`V4L2-FLAG-MEMORY-NON-CONSISTENT`:
- ``V4L2_FLAG_MEMORY_NON_CONSISTENT``
- 0x00000001
- A buffer is allocated either in consistent (it will be automatically
coherent between the CPU and the bus) or non-consistent memory. The
latter can provide performance gains, for instance the CPU cache
sync/flush operations can be avoided if the buffer is accessed by the
corresponding device only and the CPU does not read/write to/from that
buffer. However, this requires extra care from the driver -- it must
guarantee memory consistency by issuing a cache flush/sync when
consistency is needed. If this flag is set V4L2 will attempt to
allocate the buffer in non-consistent memory. The flag takes effect
only if the buffer is used for :ref:`memory mapping <mmap>` I/O and the
queue reports the :ref:`V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS
<V4L2-BUF-CAP-SUPPORTS-MMAP-CACHE-HINTS>` capability.
.. c:type:: v4l2_memory
enum v4l2_memory
......
......@@ -120,13 +120,9 @@ than the number requested.
If you want to just query the capabilities without making any
other changes, then set ``count`` to 0, ``memory`` to
``V4L2_MEMORY_MMAP`` and ``format.type`` to the buffer type.
* - __u32
- ``flags``
- Specifies additional buffer management attributes.
See :ref:`memory-flags`.
* - __u32
- ``reserved``\ [6]
- ``reserved``\ [7]
- A place holder for future extensions. Drivers and applications
must set the array to zero.
......
......@@ -112,17 +112,10 @@ aborting or finishing any DMA in progress, an implicit
``V4L2_MEMORY_MMAP`` and ``type`` set to the buffer type. This will
free any previously allocated buffers, so this is typically something
that will be done at the start of the application.
* - union {
- (anonymous)
* - __u32
- ``flags``
- Specifies additional buffer management attributes.
See :ref:`memory-flags`.
* - __u32
- ``reserved``\ [1]
- Kept for backwards compatibility. Use ``flags`` instead.
* - }
-
- A place holder for future extensions. Drivers and applications
must set the array to zero.
.. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}|
......@@ -169,7 +162,6 @@ aborting or finishing any DMA in progress, an implicit
- This capability is set by the driver to indicate that the queue supports
cache and memory management hints. However, it's only valid when the
queue is used for :ref:`memory mapping <mmap>` streaming I/O. See
:ref:`V4L2_FLAG_MEMORY_NON_CONSISTENT <V4L2-FLAG-MEMORY-NON-CONSISTENT>`,
:ref:`V4L2_BUF_FLAG_NO_CACHE_INVALIDATE <V4L2-BUF-FLAG-NO-CACHE-INVALIDATE>` and
:ref:`V4L2_BUF_FLAG_NO_CACHE_CLEAN <V4L2-BUF-FLAG-NO-CACHE-CLEAN>`.
......
......@@ -16154,7 +16154,7 @@ M: Leon Luo <leonl@leopardimaging.com>
L: linux-media@vger.kernel.org
S: Maintained
T: git git://linuxtv.org/media_tree.git
F: Documentation/devicetree/bindings/media/i2c/imx274.txt
F: Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
F: drivers/media/i2c/imx274.c
SONY IMX290 SENSOR DRIVER
......
......@@ -1199,7 +1199,7 @@ void cec_received_msg_ts(struct cec_adapter *adap,
/* Cancel the pending timeout work */
if (!cancel_delayed_work(&data->work)) {
mutex_unlock(&adap->lock);
flush_scheduled_work();
cancel_delayed_work_sync(&data->work);
mutex_lock(&adap->lock);
}
/*
......
......@@ -721,39 +721,14 @@ int vb2_verify_memory_type(struct vb2_queue *q,
}
EXPORT_SYMBOL(vb2_verify_memory_type);
static void set_queue_consistency(struct vb2_queue *q, bool consistent_mem)
{
q->dma_attrs &= ~DMA_ATTR_NON_CONSISTENT;
if (!vb2_queue_allows_cache_hints(q))
return;
if (!consistent_mem)
q->dma_attrs |= DMA_ATTR_NON_CONSISTENT;
}
static bool verify_consistency_attr(struct vb2_queue *q, bool consistent_mem)
{
bool queue_is_consistent = !(q->dma_attrs & DMA_ATTR_NON_CONSISTENT);
if (consistent_mem != queue_is_consistent) {
dprintk(q, 1, "memory consistency model mismatch\n");
return false;
}
return true;
}
int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory,
unsigned int flags, unsigned int *count)
unsigned int *count)
{
unsigned int num_buffers, allocated_buffers, num_planes = 0;
unsigned plane_sizes[VB2_MAX_PLANES] = { };
bool consistent_mem = true;
unsigned int i;
int ret;
if (flags & V4L2_FLAG_MEMORY_NON_CONSISTENT)
consistent_mem = false;
if (q->streaming) {
dprintk(q, 1, "streaming active\n");
return -EBUSY;
......@@ -765,8 +740,7 @@ int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory,
}
if (*count == 0 || q->num_buffers != 0 ||
(q->memory != VB2_MEMORY_UNKNOWN && q->memory != memory) ||
!verify_consistency_attr(q, consistent_mem)) {
(q->memory != VB2_MEMORY_UNKNOWN && q->memory != memory)) {
/*
* We already have buffers allocated, so first check if they
* are not in use and can be freed.
......@@ -803,7 +777,6 @@ int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory,
num_buffers = min_t(unsigned int, num_buffers, VB2_MAX_FRAME);
memset(q->alloc_devs, 0, sizeof(q->alloc_devs));
q->memory = memory;
set_queue_consistency(q, consistent_mem);
/*
* Ask the driver how many buffers and planes per buffer it requires.
......@@ -888,18 +861,14 @@ int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory,
EXPORT_SYMBOL_GPL(vb2_core_reqbufs);
int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory,
unsigned int flags, unsigned int *count,
unsigned int *count,
unsigned int requested_planes,
const unsigned int requested_sizes[])
{
unsigned int num_planes = 0, num_buffers, allocated_buffers;
unsigned plane_sizes[VB2_MAX_PLANES] = { };
bool consistent_mem = true;
int ret;
if (flags & V4L2_FLAG_MEMORY_NON_CONSISTENT)
consistent_mem = false;
if (q->num_buffers == VB2_MAX_FRAME) {
dprintk(q, 1, "maximum number of buffers already allocated\n");
return -ENOBUFS;
......@@ -912,15 +881,12 @@ int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory,
}
memset(q->alloc_devs, 0, sizeof(q->alloc_devs));
q->memory = memory;
set_queue_consistency(q, consistent_mem);
q->waiting_for_buffers = !q->is_output;
} else {
if (q->memory != memory) {
dprintk(q, 1, "memory model mismatch\n");
return -EINVAL;
}
if (!verify_consistency_attr(q, consistent_mem))
return -EINVAL;
}
num_buffers = min(*count, VB2_MAX_FRAME - q->num_buffers);
......@@ -2581,7 +2547,7 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read)
fileio->memory = VB2_MEMORY_MMAP;
fileio->type = q->type;
q->fileio = fileio;
ret = vb2_core_reqbufs(q, fileio->memory, 0, &fileio->count);
ret = vb2_core_reqbufs(q, fileio->memory, &fileio->count);
if (ret)
goto err_kfree;
......@@ -2638,7 +2604,7 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read)
err_reqbufs:
fileio->count = 0;
vb2_core_reqbufs(q, fileio->memory, 0, &fileio->count);
vb2_core_reqbufs(q, fileio->memory, &fileio->count);
err_kfree:
q->fileio = NULL;
......@@ -2658,7 +2624,7 @@ static int __vb2_cleanup_fileio(struct vb2_queue *q)
vb2_core_streamoff(q, q->type);
q->fileio = NULL;
fileio->count = 0;
vb2_core_reqbufs(q, fileio->memory, 0, &fileio->count);
vb2_core_reqbufs(q, fileio->memory, &fileio->count);
kfree(fileio);
dprintk(q, 3, "file io emulator closed\n");
}
......
......@@ -42,11 +42,6 @@ struct vb2_dc_buf {
struct dma_buf_attachment *db_attach;
};
static inline bool vb2_dc_buffer_consistent(unsigned long attr)
{
return !(attr & DMA_ATTR_NON_CONSISTENT);
}
/*********************************************/
/* scatterlist table functions */
/*********************************************/
......@@ -341,13 +336,6 @@ static int
vb2_dc_dmabuf_ops_begin_cpu_access(struct dma_buf *dbuf,
enum dma_data_direction direction)
{
struct vb2_dc_buf *buf = dbuf->priv;
struct sg_table *sgt = buf->dma_sgt;
if (vb2_dc_buffer_consistent(buf->attrs))
return 0;
dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->nents, buf->dma_dir);
return 0;
}
......@@ -355,13 +343,6 @@ static int
vb2_dc_dmabuf_ops_end_cpu_access(struct dma_buf *dbuf,
enum dma_data_direction direction)
{
struct vb2_dc_buf *buf = dbuf->priv;
struct sg_table *sgt = buf->dma_sgt;
if (vb2_dc_buffer_consistent(buf->attrs))
return 0;
dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->nents, buf->dma_dir);
return 0;
}
......
......@@ -123,8 +123,7 @@ static void *vb2_dma_sg_alloc(struct device *dev, unsigned long dma_attrs,
/*
* NOTE: dma-sg allocates memory using the page allocator directly, so
* there is no memory consistency guarantee, hence dma-sg ignores DMA
* attributes passed from the upper layer. That means that
* V4L2_FLAG_MEMORY_NON_CONSISTENT has no effect on dma-sg buffers.
* attributes passed from the upper layer.
*/
buf->pages = kvmalloc_array(buf->num_pages, sizeof(struct page *),
GFP_KERNEL | __GFP_ZERO);
......
......@@ -722,22 +722,12 @@ static void fill_buf_caps(struct vb2_queue *q, u32 *caps)
#endif
}
static void clear_consistency_attr(struct vb2_queue *q,
int memory,
unsigned int *flags)
{
if (!q->allow_cache_hints || memory != V4L2_MEMORY_MMAP)
*flags &= ~V4L2_FLAG_MEMORY_NON_CONSISTENT;
}
int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req)
{
int ret = vb2_verify_memory_type(q, req->memory, req->type);
fill_buf_caps(q, &req->capabilities);
clear_consistency_attr(q, req->memory, &req->flags);
return ret ? ret : vb2_core_reqbufs(q, req->memory,
req->flags, &req->count);
return ret ? ret : vb2_core_reqbufs(q, req->memory, &req->count);
}
EXPORT_SYMBOL_GPL(vb2_reqbufs);
......@@ -769,7 +759,6 @@ int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create)
unsigned i;
fill_buf_caps(q, &create->capabilities);
clear_consistency_attr(q, create->memory, &create->flags);
create->index = q->num_buffers;
if (create->count == 0)
return ret != -EBUSY ? ret : 0;
......@@ -813,7 +802,6 @@ int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create)
if (requested_sizes[i] == 0)
return -EINVAL;
return ret ? ret : vb2_core_create_bufs(q, create->memory,
create->flags,
&create->count,
requested_planes,
requested_sizes);
......@@ -998,12 +986,11 @@ int vb2_ioctl_reqbufs(struct file *file, void *priv,
int res = vb2_verify_memory_type(vdev->queue, p->memory, p->type);
fill_buf_caps(vdev->queue, &p->capabilities);
clear_consistency_attr(vdev->queue, p->memory, &p->flags);
if (res)
return res;
if (vb2_queue_is_busy(vdev, file))
return -EBUSY;
res = vb2_core_reqbufs(vdev->queue, p->memory, p->flags, &p->count);
res = vb2_core_reqbufs(vdev->queue, p->memory, &p->count);
/* If count == 0, then the owner has released all buffers and he
is no longer owner of the queue. Otherwise we have a new owner. */
if (res == 0)
......@@ -1021,7 +1008,6 @@ int vb2_ioctl_create_bufs(struct file *file, void *priv,
p->index = vdev->queue->num_buffers;
fill_buf_caps(vdev->queue, &p->capabilities);
clear_consistency_attr(vdev->queue, p->memory, &p->flags);
/*
* If count == 0, then just check if memory and type are valid.
* Any -EBUSY result from vb2_verify_memory_type can be mapped to 0.
......
......@@ -342,7 +342,7 @@ int dvb_vb2_reqbufs(struct dvb_vb2_ctx *ctx, struct dmx_requestbuffers *req)
ctx->buf_siz = req->size;
ctx->buf_cnt = req->count;
ret = vb2_core_reqbufs(&ctx->vb_q, VB2_MEMORY_MMAP, 0, &req->count);
ret = vb2_core_reqbufs(&ctx->vb_q, VB2_MEMORY_MMAP, &req->count);
if (ret) {
ctx->state = DVB_VB2_STATE_NONE;
dprintk(1, "[%s] count=%d size=%d errno=%d\n", ctx->name,
......
......@@ -246,9 +246,6 @@ struct v4l2_format32 {
* @memory: buffer memory type
* @format: frame format, for which buffers are requested
* @capabilities: capabilities of this buffer type.
* @flags: additional buffer management attributes (ignored unless the
* queue has V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS capability and
* configured for MMAP streaming I/O).
* @reserved: future extensions
*/
struct v4l2_create_buffers32 {
......@@ -257,8 +254,7 @@ struct v4l2_create_buffers32 {
__u32 memory; /* enum v4l2_memory */
struct v4l2_format32 format;
__u32 capabilities;
__u32 flags;
__u32 reserved[6];
__u32 reserved[7];
};
static int __bufsize_v4l2_format(struct v4l2_format32 __user *p32, u32 *size)
......@@ -359,8 +355,7 @@ static int get_v4l2_create32(struct v4l2_create_buffers __user *p64,
{
if (!access_ok(p32, sizeof(*p32)) ||
copy_in_user(p64, p32,
offsetof(struct v4l2_create_buffers32, format)) ||
assign_in_user(&p64->flags, &p32->flags))
offsetof(struct v4l2_create_buffers32, format)))
return -EFAULT;
return __get_v4l2_format32(&p64->format, &p32->format,
aux_buf, aux_space);
......@@ -422,7 +417,6 @@ static int put_v4l2_create32(struct v4l2_create_buffers __user *p64,
copy_in_user(p32, p64,
offsetof(struct v4l2_create_buffers32, format)) ||
assign_in_user(&p32->capabilities, &p64->capabilities) ||
assign_in_user(&p32->flags, &p64->flags) ||
copy_in_user(p32->reserved, p64->reserved, sizeof(p64->reserved)))
return -EFAULT;
return __put_v4l2_format32(&p64->format, &p32->format);
......
......@@ -2042,6 +2042,9 @@ static int v4l_reqbufs(const struct v4l2_ioctl_ops *ops,
if (ret)
return ret;
CLEAR_AFTER_FIELD(p, capabilities);
return ops->vidioc_reqbufs(file, fh, p);
}
......@@ -2081,7 +2084,7 @@ static int v4l_create_bufs(const struct v4l2_ioctl_ops *ops,
if (ret)
return ret;
CLEAR_AFTER_FIELD(create, flags);
CLEAR_AFTER_FIELD(create, capabilities);
v4l_sanitize_format(&create->format);
......
......@@ -744,8 +744,6 @@ void vb2_core_querybuf(struct vb2_queue *q, unsigned int index, void *pb);
* vb2_core_reqbufs() - Initiate streaming.
* @q: pointer to &struct vb2_queue with videobuf2 queue.
* @memory: memory type, as defined by &enum vb2_memory.
* @flags: auxiliary queue/buffer management flags. Currently, the only
* used flag is %V4L2_FLAG_MEMORY_NON_CONSISTENT.
* @count: requested buffer count.
*
* Videobuf2 core helper to implement VIDIOC_REQBUF() operation. It is called
......@@ -770,13 +768,12 @@ void vb2_core_querybuf(struct vb2_queue *q, unsigned int index, void *pb);
* Return: returns zero on success; an error code otherwise.
*/
int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory,
unsigned int flags, unsigned int *count);
unsigned int *count);
/**
* vb2_core_create_bufs() - Allocate buffers and any required auxiliary structs
* @q: pointer to &struct vb2_queue with videobuf2 queue.
* @memory: memory type, as defined by &enum vb2_memory.
* @flags: auxiliary queue/buffer management flags.
* @count: requested buffer count.
* @requested_planes: number of planes requested.
* @requested_sizes: array with the size of the planes.
......@@ -794,7 +791,7 @@ int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory,
* Return: returns zero on success; an error code otherwise.
*/
int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory,
unsigned int flags, unsigned int *count,
unsigned int *count,
unsigned int requested_planes,
const unsigned int requested_sizes[]);
......
......@@ -191,8 +191,6 @@ enum v4l2_memory {
V4L2_MEMORY_DMABUF = 4,
};
#define V4L2_FLAG_MEMORY_NON_CONSISTENT (1 << 0)
/* see also http://vektor.theorem.ca/graphics/ycbcr/ */
enum v4l2_colorspace {
/*
......@@ -949,10 +947,7 @@ struct v4l2_requestbuffers {
__u32 type; /* enum v4l2_buf_type */
__u32 memory; /* enum v4l2_memory */
__u32 capabilities;
union {
__u32 flags;
__u32 reserved[1];
};
__u32 reserved[1];
};
/* capabilities for struct v4l2_requestbuffers and v4l2_create_buffers */
......@@ -2456,9 +2451,6 @@ struct v4l2_dbg_chip_info {
* @memory: enum v4l2_memory; buffer memory type
* @format: frame format, for which buffers are requested
* @capabilities: capabilities of this buffer type.
* @flags: additional buffer management attributes (ignored unless the
* queue has V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS capability
* and configured for MMAP streaming I/O).
* @reserved: future extensions
*/
struct v4l2_create_buffers {
......@@ -2467,8 +2459,7 @@ struct v4l2_create_buffers {
__u32 memory;
struct v4l2_format format;
__u32 capabilities;
__u32 flags;
__u32 reserved[6];
__u32 reserved[7];
};
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment