Commit 8fe78d52 authored by Mathieu Othacehe's avatar Mathieu Othacehe Committed by Jonathan Cameron

iio: vcnl4000: Add buffer support for VCNL4010/20.

The VCNL4010 and VCNL4020 chips are able to raise interrupts on data ready.
Use it to provide triggered buffer support for proximity data.

Those two chips also provide ambient light data. However, they are sampled
at different rate than proximity data. As this is not handled by the IIO
framework for now, and the sample frequencies of ambient light data are
very low, do add buffer support for them.
Signed-off-by: default avatarMathieu Othacehe <m.othacehe@gmail.com>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent f6889c1b
......@@ -516,6 +516,8 @@ config US5182D
config VCNL4000
tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor"
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
depends on I2C
help
Say Y here if you want to build a driver for the Vishay VCNL4000,
......
......@@ -5,6 +5,7 @@
*
* Copyright 2012 Peter Meerwald <pmeerw@pmeerw.net>
* Copyright 2019 Pursim SPC
* Copyright 2020 Mathieu Othacehe <m.othacehe@gmail.com>
*
* IIO driver for:
* VCNL4000/10/20 (7-bit I2C slave address 0x13)
......@@ -13,8 +14,7 @@
*
* TODO:
* allow to adjust IR current
* periodic ALS/proximity measurement (VCNL4010/20)
* interrupts (VCNL4010/20/40, VCNL4200)
* interrupts (VCNL4040, VCNL4200)
*/
#include <linux/module.h>
......@@ -24,9 +24,13 @@
#include <linux/pm_runtime.h>
#include <linux/interrupt.h>
#include <linux/iio/buffer.h>
#include <linux/iio/events.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/trigger.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
#define VCNL4000_DRV_NAME "vcnl4000"
#define VCNL4000_PROD_ID 0x01
......@@ -772,17 +776,26 @@ static const struct iio_chan_spec vcnl4000_channels[] = {
static const struct iio_chan_spec vcnl4010_channels[] = {
{
.type = IIO_LIGHT,
.scan_index = -1,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE),
}, {
.type = IIO_PROXIMITY,
.scan_index = 0,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SAMP_FREQ),
.info_mask_separate_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
.event_spec = vcnl4000_event_spec,
.num_event_specs = ARRAY_SIZE(vcnl4000_event_spec),
.ext_info = vcnl4000_ext_info,
.scan_type = {
.sign = 'u',
.realbits = 16,
.storagebits = 16,
.endianness = IIO_CPU,
},
},
IIO_CHAN_SOFT_TIMESTAMP(1),
};
static const struct iio_info vcnl4000_info = {
......@@ -884,10 +897,139 @@ static irqreturn_t vcnl4010_irq_thread(int irq, void *p)
isr & VCNL4010_INT_THR);
}
if (isr & VCNL4010_INT_DRDY && iio_buffer_enabled(indio_dev))
iio_trigger_poll_chained(indio_dev->trig);
end:
return IRQ_HANDLED;
}
static irqreturn_t vcnl4010_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct vcnl4000_data *data = iio_priv(indio_dev);
const unsigned long *active_scan_mask = indio_dev->active_scan_mask;
u16 buffer[8] = {0}; /* 1x16-bit + ts */
bool data_read = false;
unsigned long isr;
int val = 0;
int ret;
ret = i2c_smbus_read_byte_data(data->client, VCNL4010_ISR);
if (ret < 0)
goto end;
isr = ret;
if (test_bit(0, active_scan_mask)) {
if (test_bit(VCNL4010_INT_PROXIMITY, &isr)) {
ret = vcnl4000_read_data(data,
VCNL4000_PS_RESULT_HI,
&val);
if (ret < 0)
goto end;
buffer[0] = val;
data_read = true;
}
}
ret = i2c_smbus_write_byte_data(data->client, VCNL4010_ISR,
isr & VCNL4010_INT_DRDY);
if (ret < 0)
goto end;
if (!data_read)
goto end;
iio_push_to_buffers_with_timestamp(indio_dev, buffer,
iio_get_time_ns(indio_dev));
end:
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
}
static int vcnl4010_buffer_postenable(struct iio_dev *indio_dev)
{
struct vcnl4000_data *data = iio_priv(indio_dev);
int ret;
int cmd;
ret = iio_triggered_buffer_postenable(indio_dev);
if (ret)
return ret;
/* Do not enable the buffer if we are already capturing events. */
if (vcnl4010_is_in_periodic_mode(data)) {
ret = -EBUSY;
goto end;
}
ret = i2c_smbus_write_byte_data(data->client, VCNL4010_INT_CTRL,
VCNL4010_INT_PROX_EN);
if (ret < 0)
goto end;
cmd = VCNL4000_SELF_TIMED_EN | VCNL4000_PROX_EN;
ret = i2c_smbus_write_byte_data(data->client, VCNL4000_COMMAND, cmd);
if (ret < 0)
goto end;
return 0;
end:
iio_triggered_buffer_predisable(indio_dev);
return ret;
}
static int vcnl4010_buffer_predisable(struct iio_dev *indio_dev)
{
struct vcnl4000_data *data = iio_priv(indio_dev);
int ret, ret_disable;
ret = i2c_smbus_write_byte_data(data->client, VCNL4010_INT_CTRL, 0);
if (ret < 0)
goto end;
ret = i2c_smbus_write_byte_data(data->client, VCNL4000_COMMAND, 0);
end:
ret_disable = iio_triggered_buffer_predisable(indio_dev);
if (ret == 0)
ret = ret_disable;
return ret;
}
static const struct iio_buffer_setup_ops vcnl4010_buffer_ops = {
.postenable = &vcnl4010_buffer_postenable,
.predisable = &vcnl4010_buffer_predisable,
};
static const struct iio_trigger_ops vcnl4010_trigger_ops = {
.validate_device = iio_trigger_validate_own_device,
};
static int vcnl4010_probe_trigger(struct iio_dev *indio_dev)
{
struct vcnl4000_data *data = iio_priv(indio_dev);
struct i2c_client *client = data->client;
struct iio_trigger *trigger;
trigger = devm_iio_trigger_alloc(&client->dev, "%s-dev%d",
indio_dev->name, indio_dev->id);
if (!trigger)
return -ENOMEM;
trigger->dev.parent = &client->dev;
trigger->ops = &vcnl4010_trigger_ops;
iio_trigger_set_drvdata(trigger, indio_dev);
return devm_iio_trigger_register(&client->dev, trigger);
}
static int vcnl4000_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
......@@ -924,6 +1066,16 @@ static int vcnl4000_probe(struct i2c_client *client,
indio_dev->modes = INDIO_DIRECT_MODE;
if (client->irq && data->chip_spec->irq_support) {
ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev,
NULL,
vcnl4010_trigger_handler,
&vcnl4010_buffer_ops);
if (ret < 0) {
dev_err(&client->dev,
"unable to setup iio triggered buffer\n");
return ret;
}
ret = devm_request_threaded_irq(&client->dev, client->irq,
NULL, vcnl4010_irq_thread,
IRQF_TRIGGER_FALLING |
......@@ -934,6 +1086,10 @@ static int vcnl4000_probe(struct i2c_client *client,
dev_err(&client->dev, "irq request failed\n");
return ret;
}
ret = vcnl4010_probe_trigger(indio_dev);
if (ret < 0)
return ret;
}
ret = pm_runtime_set_active(&client->dev);
......@@ -1029,5 +1185,6 @@ static struct i2c_driver vcnl4000_driver = {
module_i2c_driver(vcnl4000_driver);
MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
MODULE_AUTHOR("Mathieu Othacehe <m.othacehe@gmail.com>");
MODULE_DESCRIPTION("Vishay VCNL4000 proximity/ambient light sensor driver");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment