Commit 9020fc96 authored by Kim Phillips's avatar Kim Phillips Committed by Paul Mackerras

[POWERPC] Add support for the mpc832x mds board

Add support for MPC832x MDS evaluation board.

This patch depends on the 8360+QE lib patches by Leo.

The MPC832x processors (MPC8323E, MPC8323, MPC8321E, MPC8321) sport
the e300c2 core plus a QUICC Engine (QE).  This patch adds support for
the 832x MDS evaluation board.

The 832x MDS dts and defconfig files are pending more tests.
Signed-off-by: default avatarKim Phillips <kim.phillips@freescale.com>
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
parent 6c4a2501
...@@ -5,6 +5,13 @@ choice ...@@ -5,6 +5,13 @@ choice
prompt "Machine Type" prompt "Machine Type"
default MPC834x_SYS default MPC834x_SYS
config MPC832x_MDS
bool "Freescale MPC832x MDS"
select DEFAULT_UIMAGE
select QUICC_ENGINE
help
This option enables support for the MPC832x MDS evaluation board.
config MPC834x_SYS config MPC834x_SYS
bool "Freescale MPC834x SYS" bool "Freescale MPC834x SYS"
select DEFAULT_UIMAGE select DEFAULT_UIMAGE
...@@ -27,6 +34,12 @@ config MPC834x_ITX ...@@ -27,6 +34,12 @@ config MPC834x_ITX
endchoice endchoice
config PPC_MPC832x
bool
select PPC_UDBG_16550
select PPC_INDIRECT_PCI
default y if MPC832x_MDS
config MPC834x config MPC834x
bool bool
select PPC_UDBG_16550 select PPC_UDBG_16550
......
/*
* Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
*
* Description:
* MPC832xE MDS board specific routines.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/initrd.h>
#include <asm/system.h>
#include <asm/atomic.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/ipic.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
#include <asm/qe.h>
#include <asm/qe_ic.h>
#include "mpc83xx.h"
#include "mpc832x_mds.h"
#undef DEBUG
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
#endif
static u8 *bcsr_regs = NULL;
u8 *get_bcsr(void)
{
return bcsr_regs;
}
/* ************************************************************************
*
* Setup the architecture
*
*/
static void __init mpc832x_sys_setup_arch(void)
{
struct device_node *np;
if (ppc_md.progress)
ppc_md.progress("mpc832x_sys_setup_arch()", 0);
np = of_find_node_by_type(NULL, "cpu");
if (np != 0) {
unsigned int *fp =
(int *)get_property(np, "clock-frequency", NULL);
if (fp != 0)
loops_per_jiffy = *fp / HZ;
else
loops_per_jiffy = 50000000 / HZ;
of_node_put(np);
}
/* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr");
if (np != 0) {
struct resource res;
of_address_to_resource(np, 0, &res);
bcsr_regs = ioremap(res.start, res.end - res.start +1);
of_node_put(np);
}
#ifdef CONFIG_PCI
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np);
ppc_md.pci_swizzle = common_swizzle;
ppc_md.pci_exclude_device = mpc83xx_exclude_device;
#endif
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
if ((np = of_find_node_by_name(np, "par_io")) != NULL) {
par_io_init(np);
of_node_put(np);
for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
par_io_of_config(np);
}
if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
!= NULL){
/* Reset the Ethernet PHY */
bcsr_regs[9] &= ~0x20;
udelay(1000);
bcsr_regs[9] |= 0x20;
iounmap(bcsr_regs);
of_node_put(np);
}
#endif /* CONFIG_QUICC_ENGINE */
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
else
#endif
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDA1;
#endif
}
void __init mpc832x_sys_init_IRQ(void)
{
struct device_node *np;
np = of_find_node_by_type(NULL, "ipic");
if (!np)
return;
ipic_init(np, 0);
/* Initialize the default interrupt mapping priorities,
* in case the boot rom changed something on us.
*/
ipic_set_default_priority();
of_node_put(np);
#ifdef CONFIG_QUICC_ENGINE
np = of_find_node_by_type(NULL, "qeic");
if (!np)
return;
qe_ic_init(np, 0);
of_node_put(np);
#endif /* CONFIG_QUICC_ENGINE */
}
#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)
extern ulong ds1374_get_rtc_time(void);
extern int ds1374_set_rtc_time(ulong);
static int __init mpc832x_rtc_hookup(void)
{
struct timespec tv;
ppc_md.get_rtc_time = ds1374_get_rtc_time;
ppc_md.set_rtc_time = ds1374_set_rtc_time;
tv.tv_nsec = 0;
tv.tv_sec = (ppc_md.get_rtc_time) ();
do_settimeofday(&tv);
return 0;
}
late_initcall(mpc832x_rtc_hookup);
#endif
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init mpc832x_sys_probe(void)
{
char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
"model", NULL);
if (model == NULL)
return 0;
if (strcmp(model, "MPC8323EMDS"))
return 0;
DBG("%s found\n", model);
return 1;
}
define_machine(mpc832x_mds) {
.name = "MPC832x MDS",
.probe = mpc832x_sys_probe,
.setup_arch = mpc832x_sys_setup_arch,
.init_IRQ = mpc832x_sys_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
/*
* Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
*
* Description:
* MPC832x MDS board specific header.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __MACH_MPC832x_MDS_H__
#define __MACH_MPC832x_MDS_H__
extern u8 *get_bcsr(void);
#endif /* __MACH_MPC832x_MDS_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment