ARM: dts: am335x-pocketbeagle: unique gpio-line-names

Based on linux-gpio discussion [1], it is best practice to make the
gpio-line-names unique. Generic names like "[ethernet]" are replaced
with the name of the unique signal on the AM3358 SoC ball corresponding
to the gpio line. "[NC]" is also renamed to the standard "NC" name to
represent "not connected".

[1] https://lore.kernel.org/linux-gpio/20201216195357.GA2583366@x1/Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/am335x-pocketbeagle.dts

@@ -61,51 +61,51 @@ vmmcsd_fixed: fixedregulator0 {
 
 &gpio0 {
 	gpio-line-names =
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
 		"P1.08 [SPI0_CLK]",
 		"P1.10 [SPI0_MISO]",
 		"P1.12 [SPI0_MOSI]",
 		"P1.06 [SPI0_CS]",
 		"[MMC0_CD]",
 		"P2.29 [SPI1_CLK]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
+		"[SYSBOOT 12]",
+		"[SYSBOOT 13]",
+		"[SYSBOOT 14]",
+		"[SYSBOOT 15]",
 		"P1.26 [I2C2_SDA]",
 		"P1.28 [I2C2_SCL]",
 		"P2.11 [I2C1_SDA]",
 		"P2.09 [I2C1_SCL]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
+		"NC",
 		"P2.31 [SPI1_CS]",
 		"P1.20 [PRU0.16]",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
 		"P2.03",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
 		"P1.34",
 		"P2.19",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
 		"P2.05 [UART4_RX]",
 		"P2.07 [UART4_TX]";
 };
 
 &gpio1 {
 	gpio-line-names =
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
 		"P2.25 [SPI1_MOSI]",
 		"P1.32 [UART0_RX]",
 		"P1.30 [UART0_TX]",
@@ -113,10 +113,10 @@ &gpio1 {
 		"P2.33",
 		"P2.22",
 		"P2.18",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
 		"P2.01 [PWM1A]",
-		"[NC]",
+		"NC",
 		"P2.10",
 		"[USR LED 0]",
 		"[USR LED 1]",
@@ -126,35 +126,35 @@ &gpio1 {
 		"P2.04",
 		"P2.02",
 		"P2.08",
-		"[NC]",
-		"[NC]",
-		"[NC]";
+		"NC",
+		"NC",
+		"NC";
 };
 
 &gpio2 {
 	gpio-line-names =
 		"P2.20",
 		"P2.17",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
+		"NC",
 		"[EEPROM_WP]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"[SYSBOOT 0]",
+		"[SYSBOOT 1]",
+		"[SYSBOOT 2]",
+		"[SYSBOOT 3]",
+		"[SYSBOOT 4]",
+		"[SYSBOOT 5]",
+		"[SYSBOOT 6]",
+		"[SYSBOOT 7]",
+		"[SYSBOOT 8]",
+		"[SYSBOOT 9]",
+		"[SYSBOOT 10]",
+		"[SYSBOOT 11]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
 		"P2.35 [AIN5]",
 		"P1.02 [AIN6]",
 		"P1.35 [PRU1.10]",
@@ -169,19 +169,19 @@ &gpio2 {
 
 &gpio3 {
 	gpio-line-names =
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
 		"[I2C0_SDA]",
 		"[I2C0_SCL]",
-		"[JTAG]",
-		"[JTAG]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"[JTAG EMU0]",
+		"[JTAG EMU1]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
 		"P1.03 [USB1]",
 		"P1.36 [PWM0A]",
 		"P1.33 [PRU0.1]",
@@ -191,16 +191,16 @@ &gpio3 {
 		"P2.34 [PRU0.5]",
 		"P2.28 [PRU0.6]",
 		"P1.29 [PRU0.7]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]";
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
 };
 
 &am33xx_pinmux {