Commit 909aeca6 authored by Grant C. Likely's avatar Grant C. Likely Committed by Paul Mackerras

[PATCH] powerpc: Add support for Xilinx ML403 reference design

Includes fix for Xilinx silicon errata 213
Signed-off-by: default avatarGrant C. Likely <grant.likely@secretlab.ca>
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
parent b58b5aa5
......@@ -192,6 +192,7 @@ boot-$(CONFIG_8xx) += embed_config.o
boot-$(CONFIG_8260) += embed_config.o
boot-$(CONFIG_EP405) += embed_config.o
boot-$(CONFIG_XILINX_ML300) += embed_config.o
boot-$(CONFIG_XILINX_ML403) += embed_config.o
boot-$(CONFIG_BSEIP) += iic.o
boot-$(CONFIG_MBX) += iic.o pci.o qspan_pci.o
boot-$(CONFIG_MV64X60) += misc-mv64x60.o
......
......@@ -745,7 +745,7 @@ embed_config(bd_t **bdp)
}
#endif /* WILLOW */
#ifdef CONFIG_XILINX_ML300
#if defined(CONFIG_XILINX_ML300) || defined(CONFIG_XILINX_ML403)
void
embed_config(bd_t ** bdp)
{
......@@ -782,7 +782,7 @@ embed_config(bd_t ** bdp)
timebase_period_ns = 1000000000 / bd->bi_tbfreq;
/* see bi_tbfreq definition in arch/ppc/platforms/4xx/xilinx_ml300.h */
}
#endif /* CONFIG_XILINX_ML300 */
#endif /* CONFIG_XILINX_ML300 || CONFIG_XILINX_ML403 */
#ifdef CONFIG_IBM_OPENBIOS
/* This could possibly work for all treeboot roms.
......
......@@ -65,6 +65,13 @@ start_:
*/
#endif
#if defined(CONFIG_XILINX_VIRTEX_4_FX)
/* PPC errata 213: only for Virtex-4 FX */
mfccr0 0
oris 0,0,0x50000000@h
mtccr0 0
#endif
mflr r3 /* Save our actual starting address. */
/* The following functions we call must not modify r3 or r4.....
......
......@@ -57,6 +57,10 @@ config XILINX_ML300
help
This option enables support for the Xilinx ML300 evaluation board.
config XILINX_ML403
bool "Xilinx-ML403"
help
This option enables support for the Xilinx ML403 evaluation board.
endchoice
choice
......@@ -208,9 +212,14 @@ config XILINX_VIRTEX_II_PRO
depends on XILINX_ML300
default y
config XILINX_VIRTEX_4_FX
bool
depends on XILINX_ML403
default y
config XILINX_VIRTEX
bool
depends on XILINX_VIRTEX_II_PRO
depends on XILINX_VIRTEX_II_PRO || XILINX_VIRTEX_4_FX
default y
config STB03xxx
......@@ -220,7 +229,7 @@ config STB03xxx
config EMBEDDEDBOOT
bool
depends on EP405 || XILINX_ML300
depends on EP405 || XILINX_ML300 || XILINX_ML403
default y
config IBM_OPENBIOS
......
......@@ -14,6 +14,7 @@ obj-$(CONFIG_REDWOOD_6) += redwood6.o
obj-$(CONFIG_SYCAMORE) += sycamore.o
obj-$(CONFIG_WALNUT) += walnut.o
obj-$(CONFIG_XILINX_ML300) += xilinx_ml300.o
obj-$(CONFIG_XILINX_ML403) += xilinx_ml403.o
obj-$(CONFIG_405GP) += ibm405gp.o
obj-$(CONFIG_REDWOOD_5) += ibmstb4.o
......@@ -27,3 +28,4 @@ obj-$(CONFIG_440SPE) += ppc440spe.o
obj-$(CONFIG_405EP) += ibm405ep.o
obj-$(CONFIG_405GPR) += ibm405gpr.o
obj-$(CONFIG_XILINX_VIRTEX) += virtex.o
/*
* arch/ppc/platforms/4xx/xilinx_ml403.c
*
* Xilinx ML403 evaluation board initialization
*
* Author: Grant Likely <grant.likely@secretlab.ca>
*
* 2005 (c) Secret Lab Technologies Ltd.
* 2002-2004 (c) MontaVista Software, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/serialP.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/ppc_sys.h>
#include <syslib/gen550.h>
#include <platforms/4xx/xparameters/xparameters.h>
/*
* As an overview of how the following functions (platform_init,
* ml403_map_io, ml403_setup_arch and ml403_init_IRQ) fit into the
* kernel startup procedure, here's a call tree:
*
* start_here arch/ppc/kernel/head_4xx.S
* early_init arch/ppc/kernel/setup.c
* machine_init arch/ppc/kernel/setup.c
* platform_init this file
* ppc4xx_init arch/ppc/syslib/ppc4xx_setup.c
* parse_bootinfo
* find_bootinfo
* "setup some default ppc_md pointers"
* MMU_init arch/ppc/mm/init.c
* *ppc_md.setup_io_mappings == ml403_map_io this file
* ppc4xx_map_io arch/ppc/syslib/ppc4xx_setup.c
* start_kernel init/main.c
* setup_arch arch/ppc/kernel/setup.c
* #if defined(CONFIG_KGDB)
* *ppc_md.kgdb_map_scc() == gen550_kgdb_map_scc
* #endif
* *ppc_md.setup_arch == ml403_setup_arch this file
* ppc4xx_setup_arch arch/ppc/syslib/ppc4xx_setup.c
* ppc4xx_find_bridges arch/ppc/syslib/ppc405_pci.c
* init_IRQ arch/ppc/kernel/irq.c
* *ppc_md.init_IRQ == ml403_init_IRQ this file
* ppc4xx_init_IRQ arch/ppc/syslib/ppc4xx_setup.c
* ppc4xx_pic_init arch/ppc/syslib/xilinx_pic.c
*/
/* Board specifications structures */
struct ppc_sys_spec *cur_ppc_sys_spec;
struct ppc_sys_spec ppc_sys_specs[] = {
{
/* Only one entry, always assume the same design */
.ppc_sys_name = "Xilinx ML403 Reference Design",
.mask = 0x00000000,
.value = 0x00000000,
.num_devices = 1,
.device_list = (enum ppc_sys_devices[])
{
VIRTEX_UART,
},
},
};
#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
static volatile unsigned *powerdown_base =
(volatile unsigned *) XPAR_POWER_0_POWERDOWN_BASEADDR;
static void
xilinx_power_off(void)
{
local_irq_disable();
out_be32(powerdown_base, XPAR_POWER_0_POWERDOWN_VALUE);
while (1) ;
}
#endif
void __init
ml403_map_io(void)
{
ppc4xx_map_io();
#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
powerdown_base = ioremap((unsigned long) powerdown_base,
XPAR_POWER_0_POWERDOWN_HIGHADDR -
XPAR_POWER_0_POWERDOWN_BASEADDR + 1);
#endif
}
/* Early serial support functions */
static void __init
ml403_early_serial_init(int num, struct plat_serial8250_port *pdata)
{
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
struct uart_port serial_req;
memset(&serial_req, 0, sizeof(serial_req));
serial_req.mapbase = pdata->mapbase;
serial_req.membase = pdata->membase;
serial_req.irq = pdata->irq;
serial_req.uartclk = pdata->uartclk;
serial_req.regshift = pdata->regshift;
serial_req.iotype = pdata->iotype;
serial_req.flags = pdata->flags;
gen550_init(num, &serial_req);
#endif
}
void __init
ml403_early_serial_map(void)
{
#ifdef CONFIG_SERIAL_8250
struct plat_serial8250_port *pdata;
int i = 0;
pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(VIRTEX_UART);
while(pdata && pdata->flags)
{
pdata->membase = ioremap(pdata->mapbase, 0x100);
ml403_early_serial_init(i, pdata);
pdata++;
i++;
}
#endif /* CONFIG_SERIAL_8250 */
}
void __init
ml403_setup_arch(void)
{
ml403_early_serial_map();
ppc4xx_setup_arch(); /* calls ppc4xx_find_bridges() */
/* Identify the system */
printk(KERN_INFO "Xilinx ML403 Reference System (Virtex-4 FX)\n");
}
/* Called after board_setup_irq from ppc4xx_init_IRQ(). */
void __init
ml403_init_irq(void)
{
ppc4xx_init_IRQ();
}
void __init
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
ppc4xx_init(r3, r4, r5, r6, r7);
identify_ppc_sys_by_id(mfspr(SPRN_PVR));
ppc_md.setup_arch = ml403_setup_arch;
ppc_md.setup_io_mappings = ml403_map_io;
ppc_md.init_IRQ = ml403_init_irq;
#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
ppc_md.power_off = xilinx_power_off;
#endif
#ifdef CONFIG_KGDB
ppc_md.early_serial_map = ml403_early_serial_map;
#endif
}
/*
* arch/ppc/platforms/4xx/xilinx_ml403.h
*
* Include file that defines the Xilinx ML403 reference design
*
* Author: Grant Likely <grant.likely@secretlab.ca>
*
* 2005 (c) Secret Lab Technologies Ltd.
* 2002-2004 (c) MontaVista Software, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#ifdef __KERNEL__
#ifndef __ASM_XILINX_ML403_H__
#define __ASM_XILINX_ML403_H__
/* ML403 has a Xilinx Virtex-4 FPGA with a PPC405 hard core */
#include <platforms/4xx/virtex.h>
#ifndef __ASSEMBLY__
#include <linux/types.h>
typedef struct board_info {
unsigned int bi_memsize; /* DRAM installed, in bytes */
unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */
unsigned int bi_intfreq; /* Processor speed, in Hz */
unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
} bd_t;
/* Some 4xx parts use a different timebase frequency from the internal clock.
*/
#define bi_tbfreq bi_intfreq
#endif /* !__ASSEMBLY__ */
/* We don't need anything mapped. Size of zero will accomplish that. */
#define PPC4xx_ONB_IO_PADDR 0u
#define PPC4xx_ONB_IO_VADDR 0u
#define PPC4xx_ONB_IO_SIZE 0u
#define PPC4xx_MACHINE_NAME "Xilinx ML403 Reference Design"
#endif /* __ASM_XILINX_ML403_H__ */
#endif /* __KERNEL__ */
......@@ -16,6 +16,8 @@
#if defined(CONFIG_XILINX_ML300)
#include "xparameters_ml300.h"
#elif defined(CONFIG_XILINX_ML403)
#include "xparameters_ml403.h"
#else
/* Add other board xparameter includes here before the #else */
#error No xparameters_*.h file included
......
......@@ -51,6 +51,10 @@
#include <platforms/4xx/xilinx_ml300.h>
#endif
#if defined(CONFIG_XILINX_ML403)
#include <platforms/4xx/xilinx_ml403.h>
#endif
#ifndef __ASSEMBLY__
#ifdef CONFIG_40x
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment