Merge branch 'net-hns3-misc-updates-for-next'

Huazhong Tan says:

====================
net: hns3: misc updates for -next

This patchset includes some misc updates for the HNS3 ethernet driver.

 #1 & #2 add two cleanups.
 #3 provides an interface for the client to query the CMDQ's status.
 #4 adds a little optimization about debugfs.
 #5 prevents 1000M auto-negotiation off setting.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/hisilicon/hns3/hnae3.h

@@ -552,6 +552,7 @@ struct hnae3_ae_ops {
 	int (*set_vf_mac)(struct hnae3_handle *handle, int vf, u8 *p);
 	int (*get_module_eeprom)(struct hnae3_handle *handle, u32 offset,
 				 u32 len, u8 *data);
+	bool (*get_cmdq_stat)(struct hnae3_handle *handle);
 };
 
 struct hnae3_dcb_ops {

drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c

@@ -773,8 +773,13 @@ static int hns3_set_link_ksettings(struct net_device *netdev,
 		  cmd->base.autoneg, cmd->base.speed, cmd->base.duplex);
 
 	/* Only support ksettings_set for netdev with phy attached for now */
-	if (netdev->phydev)
+	if (netdev->phydev) {
+		if (cmd->base.speed == SPEED_1000 &&
+		    cmd->base.autoneg == AUTONEG_DISABLE)
+			return -EINVAL;
+
 		return phy_ethtool_ksettings_set(netdev->phydev, cmd);
+	}
 
 	if (handle->pdev->revision == 0x20)
 		return -EOPNOTSUPP;

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h

@@ -184,11 +184,11 @@ enum hclge_opcode_type {
 	/* TQP commands */
 	HCLGE_OPC_CFG_TX_QUEUE		= 0x0B01,
 	HCLGE_OPC_QUERY_TX_POINTER	= 0x0B02,
-	HCLGE_OPC_QUERY_TX_STATUS	= 0x0B03,
+	HCLGE_OPC_QUERY_TX_STATS	= 0x0B03,
 	HCLGE_OPC_TQP_TX_QUEUE_TC	= 0x0B04,
 	HCLGE_OPC_CFG_RX_QUEUE		= 0x0B11,
 	HCLGE_OPC_QUERY_RX_POINTER	= 0x0B12,
-	HCLGE_OPC_QUERY_RX_STATUS	= 0x0B13,
+	HCLGE_OPC_QUERY_RX_STATS	= 0x0B13,
 	HCLGE_OPC_STASH_RX_QUEUE_LRO	= 0x0B16,
 	HCLGE_OPC_CFG_RX_QUEUE_LRO	= 0x0B17,
 	HCLGE_OPC_CFG_COM_TQP_QUEUE	= 0x0B20,

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c

@@ -1258,6 +1258,7 @@ static void hclge_dbg_dump_ncl_config(struct hclge_dev *hdev,
 {
 #define HCLGE_MAX_NCL_CONFIG_OFFSET	4096
 #define HCLGE_NCL_CONFIG_LENGTH_IN_EACH_CMD	(20 + 24 * 4)
+#define HCLGE_NCL_CONFIG_PARAM_NUM	2
 
 	struct hclge_desc desc[HCLGE_CMD_NCL_CONFIG_BD_NUM];
 	int bd_num = HCLGE_CMD_NCL_CONFIG_BD_NUM;
@@ -1267,13 +1268,17 @@ static void hclge_dbg_dump_ncl_config(struct hclge_dev *hdev,
 	int ret;
 
 	ret = sscanf(cmd_buf, "%x %x", &offset, &length);
-	if (ret != 2 || offset >= HCLGE_MAX_NCL_CONFIG_OFFSET ||
-	    length > HCLGE_MAX_NCL_CONFIG_OFFSET - offset) {
-		dev_err(&hdev->pdev->dev, "Invalid offset or length.\n");
+	if (ret != HCLGE_NCL_CONFIG_PARAM_NUM) {
+		dev_err(&hdev->pdev->dev,
+			"Too few parameters, num = %d.\n", ret);
 		return;
 	}
-	if (offset < 0 || length <= 0) {
-		dev_err(&hdev->pdev->dev, "Non-positive offset or length.\n");
+
+	if (offset < 0 || offset >= HCLGE_MAX_NCL_CONFIG_OFFSET ||
+	    length <= 0 || length > HCLGE_MAX_NCL_CONFIG_OFFSET - offset) {
+		dev_err(&hdev->pdev->dev,
+			"Invalid input, offset = %d, length = %d.\n",
+			offset, length);
 		return;
 	}
 

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h

@@ -16,7 +16,6 @@
 #define HCLGE_RAS_REG_NFE_MASK   0xFF00
 #define HCLGE_RAS_REG_ROCEE_ERR_MASK   0x3000000
 
-#define HCLGE_VECTOR0_PF_OTHER_INT_STS_REG   0x20800
 #define HCLGE_VECTOR0_REG_MSIX_MASK   0x1FF00
 
 #define HCLGE_IMP_TCM_ECC_ERR_INT_EN	0xFFFF0000

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c

@@ -552,7 +552,7 @@ static int hclge_tqps_update_stats(struct hnae3_handle *handle)
 		queue = handle->kinfo.tqp[i];
 		tqp = container_of(queue, struct hclge_tqp, q);
 		/* command : HCLGE_OPC_QUERY_IGU_STAT */
-		hclge_cmd_setup_basic_desc(&desc[0], HCLGE_OPC_QUERY_RX_STATUS,
+		hclge_cmd_setup_basic_desc(&desc[0], HCLGE_OPC_QUERY_RX_STATS,
 					   true);
 
 		desc[0].data[0] = cpu_to_le32((tqp->index & 0x1ff));
@@ -572,7 +572,7 @@ static int hclge_tqps_update_stats(struct hnae3_handle *handle)
 		tqp = container_of(queue, struct hclge_tqp, q);
 		/* command : HCLGE_OPC_QUERY_IGU_STAT */
 		hclge_cmd_setup_basic_desc(&desc[0],
-					   HCLGE_OPC_QUERY_TX_STATUS,
+					   HCLGE_OPC_QUERY_TX_STATS,
 					   true);
 
 		desc[0].data[0] = cpu_to_le32((tqp->index & 0x1ff));
@@ -2968,13 +2968,11 @@ static int hclge_set_vf_link_state(struct hnae3_handle *handle, int vf,
 
 static u32 hclge_check_event_cause(struct hclge_dev *hdev, u32 *clearval)
 {
-	u32 rst_src_reg, cmdq_src_reg, msix_src_reg;
+	u32 cmdq_src_reg, msix_src_reg;
 
 	/* fetch the events from their corresponding regs */
-	rst_src_reg = hclge_read_dev(&hdev->hw, HCLGE_MISC_VECTOR_INT_STS);
 	cmdq_src_reg = hclge_read_dev(&hdev->hw, HCLGE_VECTOR0_CMDQ_SRC_REG);
-	msix_src_reg = hclge_read_dev(&hdev->hw,
-				      HCLGE_VECTOR0_PF_OTHER_INT_STS_REG);
+	msix_src_reg = hclge_read_dev(&hdev->hw, HCLGE_MISC_VECTOR_INT_STS);
 
 	/* Assumption: If by any chance reset and mailbox events are reported
 	 * together then we will only process reset event in this go and will
@@ -2984,7 +2982,7 @@ static u32 hclge_check_event_cause(struct hclge_dev *hdev, u32 *clearval)
 	 *
 	 * check for vector0 reset event sources
 	 */
-	if (BIT(HCLGE_VECTOR0_IMPRESET_INT_B) & rst_src_reg) {
+	if (BIT(HCLGE_VECTOR0_IMPRESET_INT_B) & msix_src_reg) {
 		dev_info(&hdev->pdev->dev, "IMP reset interrupt\n");
 		set_bit(HNAE3_IMP_RESET, &hdev->reset_pending);
 		set_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state);
@@ -2993,7 +2991,7 @@ static u32 hclge_check_event_cause(struct hclge_dev *hdev, u32 *clearval)
 		return HCLGE_VECTOR0_EVENT_RST;
 	}
 
-	if (BIT(HCLGE_VECTOR0_GLOBALRESET_INT_B) & rst_src_reg) {
+	if (BIT(HCLGE_VECTOR0_GLOBALRESET_INT_B) & msix_src_reg) {
 		dev_info(&hdev->pdev->dev, "global reset interrupt\n");
 		set_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state);
 		set_bit(HNAE3_GLOBAL_RESET, &hdev->reset_pending);
@@ -3483,7 +3481,7 @@ static enum hnae3_reset_type hclge_get_reset_level(struct hnae3_ae_dev *ae_dev,
 	/* first, resolve any unknown reset type to the known type(s) */
 	if (test_bit(HNAE3_UNKNOWN_RESET, addr)) {
 		u32 msix_sts_reg = hclge_read_dev(&hdev->hw,
-					HCLGE_VECTOR0_PF_OTHER_INT_STS_REG);
+					HCLGE_MISC_VECTOR_INT_STS);
 		/* we will intentionally ignore any errors from this function
 		 *  as we will end up in *some* reset request in any case
 		 */
@@ -6404,6 +6402,14 @@ static bool hclge_get_hw_reset_stat(struct hnae3_handle *handle)
 	       hclge_read_dev(&hdev->hw, HCLGE_FUN_RST_ING);
 }
 
+static bool hclge_get_cmdq_stat(struct hnae3_handle *handle)
+{
+	struct hclge_vport *vport = hclge_get_vport(handle);
+	struct hclge_dev *hdev = vport->back;
+
+	return test_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state);
+}
+
 static bool hclge_ae_dev_resetting(struct hnae3_handle *handle)
 {
 	struct hclge_vport *vport = hclge_get_vport(handle);
@@ -11313,6 +11319,7 @@ static const struct hnae3_ae_ops hclge_ops = {
 	.set_vf_rate = hclge_set_vf_rate,
 	.set_vf_mac = hclge_set_vf_mac,
 	.get_module_eeprom = hclge_get_module_eeprom,
+	.get_cmdq_stat = hclge_get_cmdq_stat,
 };
 
 static struct hnae3_ae_algo ae_algo = {