Commit 90d9dd66 authored by Chris Metcalf's avatar Chris Metcalf

tile PCI RC: support more MSI-X interrupt vectors

To support PCIe devices with higher number of MSI-X interrupt vectors,
e.g. 16 for the LSI RAID card, enhance the Gx RC stack to provide more
MSI-X vectors by using the TRIO Scatter Queues, which provide 8 more
vectors in addition to ~10 from the Map Mem regions.
Signed-off-by: default avatarChris Metcalf <cmetcalf@tilera.com>
parent 803c874a
......@@ -61,6 +61,29 @@ int gxio_trio_alloc_memory_maps(gxio_trio_context_t * context,
EXPORT_SYMBOL(gxio_trio_alloc_memory_maps);
struct alloc_scatter_queues_param {
unsigned int count;
unsigned int first;
unsigned int flags;
};
int gxio_trio_alloc_scatter_queues(gxio_trio_context_t * context,
unsigned int count, unsigned int first,
unsigned int flags)
{
struct alloc_scatter_queues_param temp;
struct alloc_scatter_queues_param *params = &temp;
params->count = count;
params->first = first;
params->flags = flags;
return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
sizeof(*params),
GXIO_TRIO_OP_ALLOC_SCATTER_QUEUES);
}
EXPORT_SYMBOL(gxio_trio_alloc_scatter_queues);
struct alloc_pio_regions_param {
unsigned int count;
......
......@@ -22,6 +22,45 @@
#ifndef __ASSEMBLER__
/*
* Map SQ Doorbell Format.
* This describes the format of the write-only doorbell register that exists
* in the last 8-bytes of the MAP_SQ_BASE/LIM range. This register is only
* writable from PCIe space. Writes to this register will not be written to
* Tile memory space and thus no IO VA translation is required if the last
* page of the BASE/LIM range is not otherwise written.
*/
__extension__
typedef union
{
struct
{
#ifndef __BIG_ENDIAN__
/*
* When written with a 1, the associated MAP_SQ region's doorbell
* interrupt will be triggered once all previous writes are visible to
* Tile software.
*/
uint_reg_t doorbell : 1;
/*
* When written with a 1, the descriptor at the head of the associated
* MAP_SQ's FIFO will be dequeued.
*/
uint_reg_t pop : 1;
/* Reserved. */
uint_reg_t __reserved : 62;
#else /* __BIG_ENDIAN__ */
uint_reg_t __reserved : 62;
uint_reg_t pop : 1;
uint_reg_t doorbell : 1;
#endif
};
uint_reg_t word;
} TRIO_MAP_SQ_DOORBELL_FMT_t;
/*
* Tile PIO Region Configuration - CFG Address Format.
* This register describes the address format for PIO accesses when the
......
......@@ -30,6 +30,7 @@
#define GXIO_TRIO_OP_ALLOC_MEMORY_MAPS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1404)
#define GXIO_TRIO_OP_ALLOC_SCATTER_QUEUES IORPC_OPCODE(IORPC_FORMAT_NONE, 0x140e)
#define GXIO_TRIO_OP_ALLOC_PIO_REGIONS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1412)
#define GXIO_TRIO_OP_INIT_PIO_REGION_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1414)
......@@ -54,6 +55,10 @@ int gxio_trio_alloc_memory_maps(gxio_trio_context_t * context,
unsigned int flags);
int gxio_trio_alloc_scatter_queues(gxio_trio_context_t * context,
unsigned int count, unsigned int first,
unsigned int flags);
int gxio_trio_alloc_pio_regions(gxio_trio_context_t * context,
unsigned int count, unsigned int first,
unsigned int flags);
......
......@@ -1474,32 +1474,55 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
trio_context = controller->trio;
/*
* Allocate the Mem-Map that will accept the MSI write and
* trigger the TILE-side interrupts.
* Allocate a scatter-queue that will accept the MSI write and
* trigger the TILE-side interrupts. We use the scatter-queue regions
* before the mem map regions, because the latter are needed by more
* applications.
*/
mem_map = gxio_trio_alloc_memory_maps(trio_context, 1, 0, 0);
if (mem_map < 0) {
dev_printk(KERN_INFO, &pdev->dev,
"%s Mem-Map alloc failure. "
"Failed to initialize MSI interrupts. "
"Falling back to legacy interrupts.\n",
desc->msi_attrib.is_msix ? "MSI-X" : "MSI");
mem_map = gxio_trio_alloc_scatter_queues(trio_context, 1, 0, 0);
if (mem_map >= 0) {
TRIO_MAP_SQ_DOORBELL_FMT_t doorbell_template = {{
.pop = 0,
.doorbell = 1,
}};
mem_map += TRIO_NUM_MAP_MEM_REGIONS;
mem_map_base = MEM_MAP_INTR_REGIONS_BASE +
mem_map * MEM_MAP_INTR_REGION_SIZE;
mem_map_limit = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 1;
msi_addr = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 8;
msg.data = (unsigned int)doorbell_template.word;
} else {
/* SQ regions are out, allocate from map mem regions. */
mem_map = gxio_trio_alloc_memory_maps(trio_context, 1, 0, 0);
if (mem_map < 0) {
dev_printk(KERN_INFO, &pdev->dev,
"%s Mem-Map alloc failure. "
"Failed to initialize MSI interrupts. "
"Falling back to legacy interrupts.\n",
desc->msi_attrib.is_msix ? "MSI-X" : "MSI");
ret = -ENOMEM;
goto msi_mem_map_alloc_failure;
}
ret = -ENOMEM;
goto msi_mem_map_alloc_failure;
mem_map_base = MEM_MAP_INTR_REGIONS_BASE +
mem_map * MEM_MAP_INTR_REGION_SIZE;
mem_map_limit = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 1;
msi_addr = mem_map_base + TRIO_MAP_MEM_REG_INT3 -
TRIO_MAP_MEM_REG_INT0;
msg.data = mem_map;
}
/* We try to distribute different IRQs to different tiles. */
cpu = tile_irq_cpu(irq);
/*
* Now call up to the HV to configure the Mem-Map interrupt and
* Now call up to the HV to configure the MSI interrupt and
* set up the IPI binding.
*/
mem_map_base = MEM_MAP_INTR_REGIONS_BASE +
mem_map * MEM_MAP_INTR_REGION_SIZE;
mem_map_limit = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 1;
ret = gxio_trio_config_msi_intr(trio_context, cpu_x(cpu), cpu_y(cpu),
KERNEL_PL, irq, controller->mac,
mem_map, mem_map_base, mem_map_limit,
......@@ -1512,13 +1535,9 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
irq_set_msi_desc(irq, desc);
msi_addr = mem_map_base + TRIO_MAP_MEM_REG_INT3 - TRIO_MAP_MEM_REG_INT0;
msg.address_hi = msi_addr >> 32;
msg.address_lo = msi_addr & 0xffffffff;
msg.data = mem_map;
write_msi_msg(irq, &msg);
irq_set_chip_and_handler(irq, &tilegx_msi_chip, handle_level_irq);
irq_set_handler_data(irq, controller);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment