Commit 90f4f01b authored by Imre Kaloz's avatar Imre Kaloz Committed by Tony Lindgren

ARM: OMAP2+: Use pdata quirks for wl12xx on the AM335x EV-MSK

Enable the WiLink6 connected to mmc2.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent c792349e
...@@ -45,6 +45,18 @@ lis3_reg: fixedregulator@1 { ...@@ -45,6 +45,18 @@ lis3_reg: fixedregulator@1 {
regulator-boot-on; regulator-boot-on;
}; };
wl12xx_vmmc: fixedregulator@2 {
pinctrl-names = "default";
pinctrl-0 = <&wl12xx_gpio>;
compatible = "regulator-fixed";
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio1 29 0>;
startup-delay-us = <70000>;
enable-active-high;
};
leds { leds {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&user_leds_s0>; pinctrl-0 = <&user_leds_s0>;
...@@ -264,6 +276,24 @@ mcasp1_pins: mcasp1_pins { ...@@ -264,6 +276,24 @@ mcasp1_pins: mcasp1_pins {
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
>; >;
}; };
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
>;
};
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
>;
};
}; };
&uart0 { &uart0 {
...@@ -479,6 +509,16 @@ &gpio0 { ...@@ -479,6 +509,16 @@ &gpio0 {
ti,no-reset-on-init; ti,no-reset-on-init;
}; };
&mmc2 {
status = "okay";
vmmc-supply = <&wl12xx_vmmc>;
ti,non-removable;
bus-width = <4>;
cap-power-off-card;
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
};
&mcasp1 { &mcasp1 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&mcasp1_pins>; pinctrl-0 = <&mcasp1_pins>;
......
...@@ -233,6 +233,13 @@ static void __init omap4_panda_legacy_init(void) ...@@ -233,6 +233,13 @@ static void __init omap4_panda_legacy_init(void)
} }
#endif #endif
#ifdef CONFIG_SOC_AM33XX
static void __init am335x_evmsk_legacy_init(void)
{
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 31);
}
#endif
#ifdef CONFIG_SOC_OMAP5 #ifdef CONFIG_SOC_OMAP5
static void __init omap5_uevm_legacy_init(void) static void __init omap5_uevm_legacy_init(void)
{ {
...@@ -318,6 +325,9 @@ static struct pdata_init pdata_quirks[] __initdata = { ...@@ -318,6 +325,9 @@ static struct pdata_init pdata_quirks[] __initdata = {
{ "ti,omap4-sdp", omap4_sdp_legacy_init, }, { "ti,omap4-sdp", omap4_sdp_legacy_init, },
{ "ti,omap4-panda", omap4_panda_legacy_init, }, { "ti,omap4-panda", omap4_panda_legacy_init, },
#endif #endif
#ifdef CONFIG_SOC_AM33XX
{ "ti,am335x-evmsk", am335x_evmsk_legacy_init, },
#endif
#ifdef CONFIG_SOC_OMAP5 #ifdef CONFIG_SOC_OMAP5
{ "ti,omap5-uevm", omap5_uevm_legacy_init, }, { "ti,omap5-uevm", omap5_uevm_legacy_init, },
#endif #endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment