Commit 91348b14 authored by Thierry Reding's avatar Thierry Reding

Merge tag 'ib-mfd-pwm-v4.18-1' of...

Merge tag 'ib-mfd-pwm-v4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into for-next

Immutable branch between MFD and PWM due for the v4.18 merge window (v2)
parents d968e504 acc8e22f
......@@ -19,6 +19,11 @@ Required parameters:
Optional parameters:
- resets: Phandle to the parent reset controller.
See ../reset/st,stm32-rcc.txt
- dmas: List of phandle to dma channels that can be used for
this timer instance. There may be up to 7 dma channels.
- dma-names: List of dma names. Must match 'dmas' property. Valid
names are: "ch1", "ch2", "ch3", "ch4", "up", "trig",
"com".
Optional subnodes:
- pwm: See ../pwm/pwm-stm32.txt
......@@ -44,3 +49,18 @@ Example:
reg = <0>;
};
};
Example with all dmas:
timer@40010000 {
...
dmas = <&dmamux1 11 0x400 0x0>,
<&dmamux1 12 0x400 0x0>,
<&dmamux1 13 0x400 0x0>,
<&dmamux1 14 0x400 0x0>,
<&dmamux1 15 0x400 0x0>,
<&dmamux1 16 0x400 0x0>,
<&dmamux1 17 0x400 0x0>;
dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig", "com";
...
child nodes...
};
......@@ -4,16 +4,156 @@
* Author: Benjamin Gaignard <benjamin.gaignard@st.com>
*/
#include <linux/bitfield.h>
#include <linux/mfd/stm32-timers.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/reset.h>
#define STM32_TIMERS_MAX_REGISTERS 0x3fc
/* DIER register DMA enable bits */
static const u32 stm32_timers_dier_dmaen[STM32_TIMERS_MAX_DMAS] = {
TIM_DIER_CC1DE,
TIM_DIER_CC2DE,
TIM_DIER_CC3DE,
TIM_DIER_CC4DE,
TIM_DIER_UIE,
TIM_DIER_TDE,
TIM_DIER_COMDE
};
static void stm32_timers_dma_done(void *p)
{
struct stm32_timers_dma *dma = p;
struct dma_tx_state state;
enum dma_status status;
status = dmaengine_tx_status(dma->chan, dma->chan->cookie, &state);
if (status == DMA_COMPLETE)
complete(&dma->completion);
}
/**
* stm32_timers_dma_burst_read - Read from timers registers using DMA.
*
* Read from STM32 timers registers using DMA on a single event.
* @dev: reference to stm32_timers MFD device
* @buf: DMA'able destination buffer
* @id: stm32_timers_dmas event identifier (ch[1..4], up, trig or com)
* @reg: registers start offset for DMA to read from (like CCRx for capture)
* @num_reg: number of registers to read upon each DMA request, starting @reg.
* @bursts: number of bursts to read (e.g. like two for pwm period capture)
* @tmo_ms: timeout (milliseconds)
*/
int stm32_timers_dma_burst_read(struct device *dev, u32 *buf,
enum stm32_timers_dmas id, u32 reg,
unsigned int num_reg, unsigned int bursts,
unsigned long tmo_ms)
{
struct stm32_timers *ddata = dev_get_drvdata(dev);
unsigned long timeout = msecs_to_jiffies(tmo_ms);
struct regmap *regmap = ddata->regmap;
struct stm32_timers_dma *dma = &ddata->dma;
size_t len = num_reg * bursts * sizeof(u32);
struct dma_async_tx_descriptor *desc;
struct dma_slave_config config;
dma_cookie_t cookie;
dma_addr_t dma_buf;
u32 dbl, dba;
long err;
int ret;
/* Sanity check */
if (id < STM32_TIMERS_DMA_CH1 || id >= STM32_TIMERS_MAX_DMAS)
return -EINVAL;
if (!num_reg || !bursts || reg > STM32_TIMERS_MAX_REGISTERS ||
(reg + num_reg * sizeof(u32)) > STM32_TIMERS_MAX_REGISTERS)
return -EINVAL;
if (!dma->chans[id])
return -ENODEV;
mutex_lock(&dma->lock);
/* Select DMA channel in use */
dma->chan = dma->chans[id];
dma_buf = dma_map_single(dev, buf, len, DMA_FROM_DEVICE);
if (dma_mapping_error(dev, dma_buf)) {
ret = -ENOMEM;
goto unlock;
}
/* Prepare DMA read from timer registers, using DMA burst mode */
memset(&config, 0, sizeof(config));
config.src_addr = (dma_addr_t)dma->phys_base + TIM_DMAR;
config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
ret = dmaengine_slave_config(dma->chan, &config);
if (ret)
goto unmap;
desc = dmaengine_prep_slave_single(dma->chan, dma_buf, len,
DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
if (!desc) {
ret = -EBUSY;
goto unmap;
}
desc->callback = stm32_timers_dma_done;
desc->callback_param = dma;
cookie = dmaengine_submit(desc);
ret = dma_submit_error(cookie);
if (ret)
goto dma_term;
reinit_completion(&dma->completion);
dma_async_issue_pending(dma->chan);
/* Setup and enable timer DMA burst mode */
dbl = FIELD_PREP(TIM_DCR_DBL, bursts - 1);
dba = FIELD_PREP(TIM_DCR_DBA, reg >> 2);
ret = regmap_write(regmap, TIM_DCR, dbl | dba);
if (ret)
goto dma_term;
/* Clear pending flags before enabling DMA request */
ret = regmap_write(regmap, TIM_SR, 0);
if (ret)
goto dcr_clr;
ret = regmap_update_bits(regmap, TIM_DIER, stm32_timers_dier_dmaen[id],
stm32_timers_dier_dmaen[id]);
if (ret)
goto dcr_clr;
err = wait_for_completion_interruptible_timeout(&dma->completion,
timeout);
if (err == 0)
ret = -ETIMEDOUT;
else if (err < 0)
ret = err;
regmap_update_bits(regmap, TIM_DIER, stm32_timers_dier_dmaen[id], 0);
regmap_write(regmap, TIM_SR, 0);
dcr_clr:
regmap_write(regmap, TIM_DCR, 0);
dma_term:
dmaengine_terminate_all(dma->chan);
unmap:
dma_unmap_single(dev, dma_buf, len, DMA_FROM_DEVICE);
unlock:
dma->chan = NULL;
mutex_unlock(&dma->lock);
return ret;
}
EXPORT_SYMBOL_GPL(stm32_timers_dma_burst_read);
static const struct regmap_config stm32_timers_regmap_cfg = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = sizeof(u32),
.max_register = 0x3fc,
.max_register = STM32_TIMERS_MAX_REGISTERS,
};
static void stm32_timers_get_arr_size(struct stm32_timers *ddata)
......@@ -27,12 +167,45 @@ static void stm32_timers_get_arr_size(struct stm32_timers *ddata)
regmap_write(ddata->regmap, TIM_ARR, 0x0);
}
static void stm32_timers_dma_probe(struct device *dev,
struct stm32_timers *ddata)
{
int i;
char name[4];
init_completion(&ddata->dma.completion);
mutex_init(&ddata->dma.lock);
/* Optional DMA support: get valid DMA channel(s) or NULL */
for (i = STM32_TIMERS_DMA_CH1; i <= STM32_TIMERS_DMA_CH4; i++) {
snprintf(name, ARRAY_SIZE(name), "ch%1d", i + 1);
ddata->dma.chans[i] = dma_request_slave_channel(dev, name);
}
ddata->dma.chans[STM32_TIMERS_DMA_UP] =
dma_request_slave_channel(dev, "up");
ddata->dma.chans[STM32_TIMERS_DMA_TRIG] =
dma_request_slave_channel(dev, "trig");
ddata->dma.chans[STM32_TIMERS_DMA_COM] =
dma_request_slave_channel(dev, "com");
}
static void stm32_timers_dma_remove(struct device *dev,
struct stm32_timers *ddata)
{
int i;
for (i = STM32_TIMERS_DMA_CH1; i < STM32_TIMERS_MAX_DMAS; i++)
if (ddata->dma.chans[i])
dma_release_channel(ddata->dma.chans[i]);
}
static int stm32_timers_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct stm32_timers *ddata;
struct resource *res;
void __iomem *mmio;
int ret;
ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
if (!ddata)
......@@ -43,6 +216,9 @@ static int stm32_timers_probe(struct platform_device *pdev)
if (IS_ERR(mmio))
return PTR_ERR(mmio);
/* Timer physical addr for DMA */
ddata->dma.phys_base = res->start;
ddata->regmap = devm_regmap_init_mmio_clk(dev, "int", mmio,
&stm32_timers_regmap_cfg);
if (IS_ERR(ddata->regmap))
......@@ -54,9 +230,29 @@ static int stm32_timers_probe(struct platform_device *pdev)
stm32_timers_get_arr_size(ddata);
stm32_timers_dma_probe(dev, ddata);
platform_set_drvdata(pdev, ddata);
return devm_of_platform_populate(&pdev->dev);
ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
if (ret)
stm32_timers_dma_remove(dev, ddata);
return ret;
}
static int stm32_timers_remove(struct platform_device *pdev)
{
struct stm32_timers *ddata = platform_get_drvdata(pdev);
/*
* Don't use devm_ here: enfore of_platform_depopulate() happens before
* DMA are released, to avoid race on DMA.
*/
of_platform_depopulate(&pdev->dev);
stm32_timers_dma_remove(&pdev->dev, ddata);
return 0;
}
static const struct of_device_id stm32_timers_of_match[] = {
......@@ -67,6 +263,7 @@ MODULE_DEVICE_TABLE(of, stm32_timers_of_match);
static struct platform_driver stm32_timers_driver = {
.probe = stm32_timers_probe,
.remove = stm32_timers_remove,
.driver = {
.name = "stm32-timers",
.of_match_table = stm32_timers_of_match,
......
......@@ -8,6 +8,7 @@
* pwm-atmel.c from Bo Shen
*/
#include <linux/bitfield.h>
#include <linux/mfd/stm32-timers.h>
#include <linux/module.h>
#include <linux/of.h>
......@@ -25,6 +26,7 @@ struct stm32_pwm {
struct regmap *regmap;
u32 max_arr;
bool have_complementary_output;
u32 capture[4] ____cacheline_aligned; /* DMA'able buffer */
};
struct stm32_breakinput {
......@@ -62,6 +64,258 @@ static int write_ccrx(struct stm32_pwm *dev, int ch, u32 value)
return -EINVAL;
}
#define TIM_CCER_CC12P (TIM_CCER_CC1P | TIM_CCER_CC2P)
#define TIM_CCER_CC12E (TIM_CCER_CC1E | TIM_CCER_CC2E)
#define TIM_CCER_CC34P (TIM_CCER_CC3P | TIM_CCER_CC4P)
#define TIM_CCER_CC34E (TIM_CCER_CC3E | TIM_CCER_CC4E)
/*
* Capture using PWM input mode:
* ___ ___
* TI[1, 2, 3 or 4]: ........._| |________|
* ^0 ^1 ^2
* . . .
* . . XXXXX
* . . XXXXX |
* . XXXXX . |
* XXXXX . . |
* COUNTER: ______XXXXX . . . |_XXX
* start^ . . . ^stop
* . . . .
* v v . v
* v
* CCR1/CCR3: tx..........t0...........t2
* CCR2/CCR4: tx..............t1.........
*
* DMA burst transfer: | |
* v v
* DMA buffer: { t0, tx } { t2, t1 }
* DMA done: ^
*
* 0: IC1/3 snapchot on rising edge: counter value -> CCR1/CCR3
* + DMA transfer CCR[1/3] & CCR[2/4] values (t0, tx: doesn't care)
* 1: IC2/4 snapchot on falling edge: counter value -> CCR2/CCR4
* 2: IC1/3 snapchot on rising edge: counter value -> CCR1/CCR3
* + DMA transfer CCR[1/3] & CCR[2/4] values (t2, t1)
*
* DMA done, compute:
* - Period = t2 - t0
* - Duty cycle = t1 - t0
*/
static int stm32_pwm_raw_capture(struct stm32_pwm *priv, struct pwm_device *pwm,
unsigned long tmo_ms, u32 *raw_prd,
u32 *raw_dty)
{
struct device *parent = priv->chip.dev->parent;
enum stm32_timers_dmas dma_id;
u32 ccen, ccr;
int ret;
/* Ensure registers have been updated, enable counter and capture */
regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG);
regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, TIM_CR1_CEN);
/* Use cc1 or cc3 DMA resp for PWM input channels 1 & 2 or 3 & 4 */
dma_id = pwm->hwpwm < 2 ? STM32_TIMERS_DMA_CH1 : STM32_TIMERS_DMA_CH3;
ccen = pwm->hwpwm < 2 ? TIM_CCER_CC12E : TIM_CCER_CC34E;
ccr = pwm->hwpwm < 2 ? TIM_CCR1 : TIM_CCR3;
regmap_update_bits(priv->regmap, TIM_CCER, ccen, ccen);
/*
* Timer DMA burst mode. Request 2 registers, 2 bursts, to get both
* CCR1 & CCR2 (or CCR3 & CCR4) on each capture event.
* We'll get two capture snapchots: { CCR1, CCR2 }, { CCR1, CCR2 }
* or { CCR3, CCR4 }, { CCR3, CCR4 }
*/
ret = stm32_timers_dma_burst_read(parent, priv->capture, dma_id, ccr, 2,
2, tmo_ms);
if (ret)
goto stop;
/* Period: t2 - t0 (take care of counter overflow) */
if (priv->capture[0] <= priv->capture[2])
*raw_prd = priv->capture[2] - priv->capture[0];
else
*raw_prd = priv->max_arr - priv->capture[0] + priv->capture[2];
/* Duty cycle capture requires at least two capture units */
if (pwm->chip->npwm < 2)
*raw_dty = 0;
else if (priv->capture[0] <= priv->capture[3])
*raw_dty = priv->capture[3] - priv->capture[0];
else
*raw_dty = priv->max_arr - priv->capture[0] + priv->capture[3];
if (*raw_dty > *raw_prd) {
/*
* Race beetween PWM input and DMA: it may happen
* falling edge triggers new capture on TI2/4 before DMA
* had a chance to read CCR2/4. It means capture[1]
* contains period + duty_cycle. So, subtract period.
*/
*raw_dty -= *raw_prd;
}
stop:
regmap_update_bits(priv->regmap, TIM_CCER, ccen, 0);
regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0);
return ret;
}
static int stm32_pwm_capture(struct pwm_chip *chip, struct pwm_device *pwm,
struct pwm_capture *result, unsigned long tmo_ms)
{
struct stm32_pwm *priv = to_stm32_pwm_dev(chip);
unsigned long long prd, div, dty;
unsigned long rate;
unsigned int psc = 0, icpsc, scale;
u32 raw_prd, raw_dty;
int ret = 0;
mutex_lock(&priv->lock);
if (active_channels(priv)) {
ret = -EBUSY;
goto unlock;
}
ret = clk_enable(priv->clk);
if (ret) {
dev_err(priv->chip.dev, "failed to enable counter clock\n");
goto unlock;
}
rate = clk_get_rate(priv->clk);
if (!rate) {
ret = -EINVAL;
goto clk_dis;
}
/* prescaler: fit timeout window provided by upper layer */
div = (unsigned long long)rate * (unsigned long long)tmo_ms;
do_div(div, MSEC_PER_SEC);
prd = div;
while ((div > priv->max_arr) && (psc < MAX_TIM_PSC)) {
psc++;
div = prd;
do_div(div, psc + 1);
}
regmap_write(priv->regmap, TIM_ARR, priv->max_arr);
regmap_write(priv->regmap, TIM_PSC, psc);
/* Map TI1 or TI2 PWM input to IC1 & IC2 (or TI3/4 to IC3 & IC4) */
regmap_update_bits(priv->regmap,
pwm->hwpwm < 2 ? TIM_CCMR1 : TIM_CCMR2,
TIM_CCMR_CC1S | TIM_CCMR_CC2S, pwm->hwpwm & 0x1 ?
TIM_CCMR_CC1S_TI2 | TIM_CCMR_CC2S_TI2 :
TIM_CCMR_CC1S_TI1 | TIM_CCMR_CC2S_TI1);
/* Capture period on IC1/3 rising edge, duty cycle on IC2/4 falling. */
regmap_update_bits(priv->regmap, TIM_CCER, pwm->hwpwm < 2 ?
TIM_CCER_CC12P : TIM_CCER_CC34P, pwm->hwpwm < 2 ?
TIM_CCER_CC2P : TIM_CCER_CC4P);
ret = stm32_pwm_raw_capture(priv, pwm, tmo_ms, &raw_prd, &raw_dty);
if (ret)
goto stop;
/*
* Got a capture. Try to improve accuracy at high rates:
* - decrease counter clock prescaler, scale up to max rate.
* - use input prescaler, capture once every /2 /4 or /8 edges.
*/
if (raw_prd) {
u32 max_arr = priv->max_arr - 0x1000; /* arbitrary margin */
scale = max_arr / min(max_arr, raw_prd);
} else {
scale = priv->max_arr; /* bellow resolution, use max scale */
}
if (psc && scale > 1) {
/* 2nd measure with new scale */
psc /= scale;
regmap_write(priv->regmap, TIM_PSC, psc);
ret = stm32_pwm_raw_capture(priv, pwm, tmo_ms, &raw_prd,
&raw_dty);
if (ret)
goto stop;
}
/* Compute intermediate period not to exceed timeout at low rates */
prd = (unsigned long long)raw_prd * (psc + 1) * NSEC_PER_SEC;
do_div(prd, rate);
for (icpsc = 0; icpsc < MAX_TIM_ICPSC ; icpsc++) {
/* input prescaler: also keep arbitrary margin */
if (raw_prd >= (priv->max_arr - 0x1000) >> (icpsc + 1))
break;
if (prd >= (tmo_ms * NSEC_PER_MSEC) >> (icpsc + 2))
break;
}
if (!icpsc)
goto done;
/* Last chance to improve period accuracy, using input prescaler */
regmap_update_bits(priv->regmap,
pwm->hwpwm < 2 ? TIM_CCMR1 : TIM_CCMR2,
TIM_CCMR_IC1PSC | TIM_CCMR_IC2PSC,
FIELD_PREP(TIM_CCMR_IC1PSC, icpsc) |
FIELD_PREP(TIM_CCMR_IC2PSC, icpsc));
ret = stm32_pwm_raw_capture(priv, pwm, tmo_ms, &raw_prd, &raw_dty);
if (ret)
goto stop;
if (raw_dty >= (raw_prd >> icpsc)) {
/*
* We may fall here using input prescaler, when input
* capture starts on high side (before falling edge).
* Example with icpsc to capture on each 4 events:
*
* start 1st capture 2nd capture
* v v v
* ___ _____ _____ _____ _____ ____
* TI1..4 |__| |__| |__| |__| |__|
* v v . . . . . v v
* icpsc1/3: . 0 . 1 . 2 . 3 . 0
* icpsc2/4: 0 1 2 3 0
* v v v v
* CCR1/3 ......t0..............................t2
* CCR2/4 ..t1..............................t1'...
* . . .
* Capture0: .<----------------------------->.
* Capture1: .<-------------------------->. .
* . . .
* Period: .<------> . .
* Low side: .<>.
*
* Result:
* - Period = Capture0 / icpsc
* - Duty = Period - Low side = Period - (Capture0 - Capture1)
*/
raw_dty = (raw_prd >> icpsc) - (raw_prd - raw_dty);
}
done:
prd = (unsigned long long)raw_prd * (psc + 1) * NSEC_PER_SEC;
result->period = DIV_ROUND_UP_ULL(prd, rate << icpsc);
dty = (unsigned long long)raw_dty * (psc + 1) * NSEC_PER_SEC;
result->duty_cycle = DIV_ROUND_UP_ULL(dty, rate);
stop:
regmap_write(priv->regmap, TIM_CCER, 0);
regmap_write(priv->regmap, pwm->hwpwm < 2 ? TIM_CCMR1 : TIM_CCMR2, 0);
regmap_write(priv->regmap, TIM_PSC, 0);
clk_dis:
clk_disable(priv->clk);
unlock:
mutex_unlock(&priv->lock);
return ret;
}
static int stm32_pwm_config(struct stm32_pwm *priv, int ch,
int duty_ns, int period_ns)
{
......@@ -230,6 +484,9 @@ static int stm32_pwm_apply_locked(struct pwm_chip *chip, struct pwm_device *pwm,
static const struct pwm_ops stm32pwm_ops = {
.owner = THIS_MODULE,
.apply = stm32_pwm_apply_locked,
#if IS_ENABLED(CONFIG_DMA_ENGINE)
.capture = stm32_pwm_capture,
#endif
};
static int stm32_pwm_set_breakinput(struct stm32_pwm *priv,
......
......@@ -8,6 +8,8 @@
#define _LINUX_STM32_GPTIMER_H_
#include <linux/clk.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/regmap.h>
#define TIM_CR1 0x00 /* Control Register 1 */
......@@ -27,6 +29,8 @@
#define TIM_CCR3 0x3C /* Capt/Comp Register 3 */
#define TIM_CCR4 0x40 /* Capt/Comp Register 4 */
#define TIM_BDTR 0x44 /* Break and Dead-Time Reg */
#define TIM_DCR 0x48 /* DMA control register */
#define TIM_DMAR 0x4C /* DMA register for transfer */
#define TIM_CR1_CEN BIT(0) /* Counter Enable */
#define TIM_CR1_DIR BIT(4) /* Counter Direction */
......@@ -36,17 +40,35 @@
#define TIM_SMCR_SMS (BIT(0) | BIT(1) | BIT(2)) /* Slave mode selection */
#define TIM_SMCR_TS (BIT(4) | BIT(5) | BIT(6)) /* Trigger selection */
#define TIM_DIER_UIE BIT(0) /* Update interrupt */
#define TIM_DIER_UDE BIT(8) /* Update DMA request Enable */
#define TIM_DIER_CC1DE BIT(9) /* CC1 DMA request Enable */
#define TIM_DIER_CC2DE BIT(10) /* CC2 DMA request Enable */
#define TIM_DIER_CC3DE BIT(11) /* CC3 DMA request Enable */
#define TIM_DIER_CC4DE BIT(12) /* CC4 DMA request Enable */
#define TIM_DIER_COMDE BIT(13) /* COM DMA request Enable */
#define TIM_DIER_TDE BIT(14) /* Trigger DMA request Enable */
#define TIM_SR_UIF BIT(0) /* Update interrupt flag */
#define TIM_EGR_UG BIT(0) /* Update Generation */
#define TIM_CCMR_PE BIT(3) /* Channel Preload Enable */
#define TIM_CCMR_M1 (BIT(6) | BIT(5)) /* Channel PWM Mode 1 */
#define TIM_CCMR_CC1S (BIT(0) | BIT(1)) /* Capture/compare 1 sel */
#define TIM_CCMR_IC1PSC GENMASK(3, 2) /* Input capture 1 prescaler */
#define TIM_CCMR_CC2S (BIT(8) | BIT(9)) /* Capture/compare 2 sel */
#define TIM_CCMR_IC2PSC GENMASK(11, 10) /* Input capture 2 prescaler */
#define TIM_CCMR_CC1S_TI1 BIT(0) /* IC1/IC3 selects TI1/TI3 */
#define TIM_CCMR_CC1S_TI2 BIT(1) /* IC1/IC3 selects TI2/TI4 */
#define TIM_CCMR_CC2S_TI2 BIT(8) /* IC2/IC4 selects TI2/TI4 */
#define TIM_CCMR_CC2S_TI1 BIT(9) /* IC2/IC4 selects TI1/TI3 */
#define TIM_CCER_CC1E BIT(0) /* Capt/Comp 1 out Ena */
#define TIM_CCER_CC1P BIT(1) /* Capt/Comp 1 Polarity */
#define TIM_CCER_CC1NE BIT(2) /* Capt/Comp 1N out Ena */
#define TIM_CCER_CC1NP BIT(3) /* Capt/Comp 1N Polarity */
#define TIM_CCER_CC2E BIT(4) /* Capt/Comp 2 out Ena */
#define TIM_CCER_CC2P BIT(5) /* Capt/Comp 2 Polarity */
#define TIM_CCER_CC3E BIT(8) /* Capt/Comp 3 out Ena */
#define TIM_CCER_CC3P BIT(9) /* Capt/Comp 3 Polarity */
#define TIM_CCER_CC4E BIT(12) /* Capt/Comp 4 out Ena */
#define TIM_CCER_CC4P BIT(13) /* Capt/Comp 4 Polarity */
#define TIM_CCER_CCXE (BIT(0) | BIT(4) | BIT(8) | BIT(12))
#define TIM_BDTR_BKE BIT(12) /* Break input enable */
#define TIM_BDTR_BKP BIT(13) /* Break input polarity */
......@@ -56,8 +78,11 @@
#define TIM_BDTR_BK2F (BIT(20) | BIT(21) | BIT(22) | BIT(23))
#define TIM_BDTR_BK2E BIT(24) /* Break 2 input enable */
#define TIM_BDTR_BK2P BIT(25) /* Break 2 input polarity */
#define TIM_DCR_DBA GENMASK(4, 0) /* DMA base addr */
#define TIM_DCR_DBL GENMASK(12, 8) /* DMA burst len */
#define MAX_TIM_PSC 0xFFFF
#define MAX_TIM_ICPSC 0x3
#define TIM_CR2_MMS_SHIFT 4
#define TIM_CR2_MMS2_SHIFT 20
#define TIM_SMCR_TS_SHIFT 4
......@@ -65,9 +90,42 @@
#define TIM_BDTR_BKF_SHIFT 16
#define TIM_BDTR_BK2F_SHIFT 20
enum stm32_timers_dmas {
STM32_TIMERS_DMA_CH1,
STM32_TIMERS_DMA_CH2,
STM32_TIMERS_DMA_CH3,
STM32_TIMERS_DMA_CH4,
STM32_TIMERS_DMA_UP,
STM32_TIMERS_DMA_TRIG,
STM32_TIMERS_DMA_COM,
STM32_TIMERS_MAX_DMAS,
};
/**
* struct stm32_timers_dma - STM32 timer DMA handling.
* @completion: end of DMA transfer completion
* @phys_base: control registers physical base address
* @lock: protect DMA access
* @chan: DMA channel in use
* @chans: DMA channels available for this timer instance
*/
struct stm32_timers_dma {
struct completion completion;
phys_addr_t phys_base;
struct mutex lock;
struct dma_chan *chan;
struct dma_chan *chans[STM32_TIMERS_MAX_DMAS];
};
struct stm32_timers {
struct clk *clk;
struct regmap *regmap;
u32 max_arr;
struct stm32_timers_dma dma; /* Only to be used by the parent */
};
int stm32_timers_dma_burst_read(struct device *dev, u32 *buf,
enum stm32_timers_dmas id, u32 reg,
unsigned int num_reg, unsigned int bursts,
unsigned long tmo_ms);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment