Merge tag 'usb-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
 "Here are a number of small USB patches for 3.6-rc3.

  The "large" one is just a number of device id updates to the option
  driver, done by the manufacturer, properly fixing up the device ids
  based on shipping devices.

  Other than that, some gadget driver fixes, the obligitary XHCI
  patches, and some other device ids and bugs fixed.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  USB: qcserial: fix port handling on Gobi 1K and 2K+
  USB: serial: Fix mos7840 timeout
  USB: option: add ZTE K5006-Z
  usb: gadget: u_ether: fix kworker 100% CPU issue with still used interfaces in eth_stop
  usb: host: tegra: fix warning messages in ehci_remove
  usb: host: mips: sead3: Update for EHCI register structure.
  usb: renesas_usbhs: fixup resume method for autonomy mode
  usb: renesas_usbhs: mod_host: add missing .bus_suspend/resume
  update MAINTAINERS for Oliver Neukum
  usb: usb_wwan: resume/suspend can be called after port is gone
  usb: serial: prevent suspend/resume from racing against probe/remove
  usb: usb_wwan: replace release and disconnect with a port_remove hook
  usb: serial: mos7840: Fixup mos7840_chars_in_buffer()
  USB: isp1362-hcd.c: usb message always saved in case of underrun
  OMAP: USB : Fix the EHCI enumeration and core retention issue
  usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module
  USB: support the new interfaces of Huawei Data Card devices in option driver
  USB: ftdi_sio: Add VID/PID for Kondo Serial USB
  xhci: Switch PPT ports to EHCI on shutdown.
  xhci: Fix bug after deq ptr set to link TRB.
  ...

MAINTAINERS

@@ -2217,7 +2217,7 @@ S:	Maintained
 F:	drivers/scsi/tmscsim.*
 
 DC395x SCSI driver
-M:	Oliver Neukum <oliver@neukum.name>
+M:	Oliver Neukum <oliver@neukum.org>
 M:	Ali Akcaagac <aliakc@web.de>
 M:	Jamie Lenehan <lenehan@twibble.org>
 W:	http://twibble.org/dist/dc395x/
@@ -4537,7 +4537,7 @@ S:	Supported
 F:	arch/microblaze/
 
 MICROTEK X6 SCANNER
-M:	Oliver Neukum <oliver@neukum.name>
+M:	Oliver Neukum <oliver@neukum.org>
 S:	Maintained
 F:	drivers/usb/image/microtek.*
 
@@ -7076,7 +7076,7 @@ F:	include/linux/mtd/ubi.h
 F:	include/mtd/ubi-user.h
 
 USB ACM DRIVER
-M:	Oliver Neukum <oliver@neukum.name>
+M:	Oliver Neukum <oliver@neukum.org>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	Documentation/usb/acm.txt
@@ -7097,7 +7097,7 @@ S:	Supported
 F:	drivers/block/ub.c
 
 USB CDC ETHERNET DRIVER
-M:	Oliver Neukum <oliver@neukum.name>
+M:	Oliver Neukum <oliver@neukum.org>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/net/usb/cdc_*.c
@@ -7170,7 +7170,7 @@ F:	drivers/usb/host/isp116x*
 F:	include/linux/usb/isp116x.h
 
 USB KAWASAKI LSI DRIVER
-M:	Oliver Neukum <oliver@neukum.name>
+M:	Oliver Neukum <oliver@neukum.org>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/serial/kl5kusb105.*

drivers/usb/chipidea/Kconfig

 config USB_CHIPIDEA
 	tristate "ChipIdea Highspeed Dual Role Controller"
-	depends on USB
+	depends on USB || USB_GADGET
 	help
-          Say Y here if your system has a dual role high speed USB
-          controller based on ChipIdea silicon IP. Currently, only the
+	  Say Y here if your system has a dual role high speed USB
+	  controller based on ChipIdea silicon IP. Currently, only the
 	  peripheral mode is supported.
 
 	  When compiled dynamically, the module will be called ci-hdrc.ko.
@@ -12,7 +12,7 @@ if USB_CHIPIDEA
 
 config USB_CHIPIDEA_UDC
 	bool "ChipIdea device controller"
-	depends on USB_GADGET
+	depends on USB_GADGET=y || USB_GADGET=USB_CHIPIDEA
 	select USB_GADGET_DUALSPEED
 	help
 	  Say Y here to enable device controller functionality of the
@@ -20,6 +20,7 @@ config USB_CHIPIDEA_UDC
 
 config USB_CHIPIDEA_HOST
 	bool "ChipIdea host controller"
+	depends on USB=y || USB=USB_CHIPIDEA
 	select USB_EHCI_ROOT_HUB_TT
 	help
 	  Say Y here to enable host controller functionality of the

drivers/usb/gadget/u_ether.c

@@ -669,6 +669,8 @@ static int eth_stop(struct net_device *net)
 	spin_lock_irqsave(&dev->lock, flags);
 	if (dev->port_usb) {
 		struct gether	*link = dev->port_usb;
+		const struct usb_endpoint_descriptor *in;
+		const struct usb_endpoint_descriptor *out;
 
 		if (link->close)
 			link->close(link);
@@ -682,10 +684,14 @@ static int eth_stop(struct net_device *net)
 		 * their own pace; the network stack can handle old packets.
 		 * For the moment we leave this here, since it works.
 		 */
+		in = link->in_ep->desc;
+		out = link->out_ep->desc;
 		usb_ep_disable(link->in_ep);
 		usb_ep_disable(link->out_ep);
 		if (netif_carrier_ok(net)) {
 			DBG(dev, "host still using in/out endpoints\n");
+			link->in_ep->desc = in;
+			link->out_ep->desc = out;
 			usb_ep_enable(link->in_ep);
 			usb_ep_enable(link->out_ep);
 		}

drivers/usb/host/ehci-omap.c

@@ -56,15 +56,6 @@
 #define	EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT		8
 #define	EHCI_INSNREG05_ULPI_WRDATA_SHIFT		0
 
-/* Errata i693 */
-static struct clk	*utmi_p1_fck;
-static struct clk	*utmi_p2_fck;
-static struct clk	*xclk60mhsp1_ck;
-static struct clk	*xclk60mhsp2_ck;
-static struct clk	*usbhost_p1_fck;
-static struct clk	*usbhost_p2_fck;
-static struct clk	*init_60m_fclk;
-
 /*-------------------------------------------------------------------------*/
 
 static const struct hc_driver ehci_omap_hc_driver;
@@ -80,40 +71,6 @@ static inline u32 ehci_read(void __iomem *base, u32 reg)
 	return __raw_readl(base + reg);
 }
 
-/* Erratum i693 workaround sequence */
-static void omap_ehci_erratum_i693(struct ehci_hcd *ehci)
-{
-	int ret = 0;
-
-	/* Switch to the internal 60 MHz clock */
-	ret = clk_set_parent(utmi_p1_fck, init_60m_fclk);
-	if (ret != 0)
-		ehci_err(ehci, "init_60m_fclk set parent"
-			"failed error:%d\n", ret);
-
-	ret = clk_set_parent(utmi_p2_fck, init_60m_fclk);
-	if (ret != 0)
-		ehci_err(ehci, "init_60m_fclk set parent"
-			"failed error:%d\n", ret);
-
-	clk_enable(usbhost_p1_fck);
-	clk_enable(usbhost_p2_fck);
-
-	/* Wait 1ms and switch back to the external clock */
-	mdelay(1);
-	ret = clk_set_parent(utmi_p1_fck, xclk60mhsp1_ck);
-	if (ret != 0)
-		ehci_err(ehci, "xclk60mhsp1_ck set parent"
-			"failed error:%d\n", ret);
-
-	ret = clk_set_parent(utmi_p2_fck, xclk60mhsp2_ck);
-	if (ret != 0)
-		ehci_err(ehci, "xclk60mhsp2_ck set parent"
-			"failed error:%d\n", ret);
-
-	clk_disable(usbhost_p1_fck);
-	clk_disable(usbhost_p2_fck);
-}
 
 static void omap_ehci_soft_phy_reset(struct usb_hcd *hcd, u8 port)
 {
@@ -195,50 +152,6 @@ static int omap_ehci_init(struct usb_hcd *hcd)
 	return rc;
 }
 
-static int omap_ehci_hub_control(
-	struct usb_hcd	*hcd,
-	u16		typeReq,
-	u16		wValue,
-	u16		wIndex,
-	char		*buf,
-	u16		wLength
-)
-{
-	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
-	u32 __iomem *status_reg = &ehci->regs->port_status[
-				(wIndex & 0xff) - 1];
-	u32		temp;
-	unsigned long	flags;
-	int		retval = 0;
-
-	spin_lock_irqsave(&ehci->lock, flags);
-
-	if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) {
-		temp = ehci_readl(ehci, status_reg);
-		if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
-			retval = -EPIPE;
-			goto done;
-		}
-
-		temp &= ~PORT_WKCONN_E;
-		temp |= PORT_WKDISC_E | PORT_WKOC_E;
-		ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
-
-		omap_ehci_erratum_i693(ehci);
-
-		set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
-		goto done;
-	}
-
-	spin_unlock_irqrestore(&ehci->lock, flags);
-
-	/* Handle the hub control events here */
-	return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
-done:
-	spin_unlock_irqrestore(&ehci->lock, flags);
-	return retval;
-}
-
 static void disable_put_regulator(
 		struct ehci_hcd_omap_platform_data *pdata)
 {
@@ -351,79 +264,9 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 		goto err_pm_runtime;
 	}
 
-	/* get clocks */
-	utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
-	if (IS_ERR(utmi_p1_fck)) {
-		ret = PTR_ERR(utmi_p1_fck);
-		dev_err(dev, "utmi_p1_gfclk failed error:%d\n",	ret);
-		goto err_add_hcd;
-	}
-
-	xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
-	if (IS_ERR(xclk60mhsp1_ck)) {
-		ret = PTR_ERR(xclk60mhsp1_ck);
-		dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
-		goto err_utmi_p1_fck;
-	}
-
-	utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
-	if (IS_ERR(utmi_p2_fck)) {
-		ret = PTR_ERR(utmi_p2_fck);
-		dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
-		goto err_xclk60mhsp1_ck;
-	}
-
-	xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
-	if (IS_ERR(xclk60mhsp2_ck)) {
-		ret = PTR_ERR(xclk60mhsp2_ck);
-		dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
-		goto err_utmi_p2_fck;
-	}
-
-	usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
-	if (IS_ERR(usbhost_p1_fck)) {
-		ret = PTR_ERR(usbhost_p1_fck);
-		dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
-		goto err_xclk60mhsp2_ck;
-	}
-
-	usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
-	if (IS_ERR(usbhost_p2_fck)) {
-		ret = PTR_ERR(usbhost_p2_fck);
-		dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
-		goto err_usbhost_p1_fck;
-	}
-
-	init_60m_fclk = clk_get(dev, "init_60m_fclk");
-	if (IS_ERR(init_60m_fclk)) {
-		ret = PTR_ERR(init_60m_fclk);
-		dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
-		goto err_usbhost_p2_fck;
-	}
 
 	return 0;
 
-err_usbhost_p2_fck:
-	clk_put(usbhost_p2_fck);
-
-err_usbhost_p1_fck:
-	clk_put(usbhost_p1_fck);
-
-err_xclk60mhsp2_ck:
-	clk_put(xclk60mhsp2_ck);
-
-err_utmi_p2_fck:
-	clk_put(utmi_p2_fck);
-
-err_xclk60mhsp1_ck:
-	clk_put(xclk60mhsp1_ck);
-
-err_utmi_p1_fck:
-	clk_put(utmi_p1_fck);
-
-err_add_hcd:
-	usb_remove_hcd(hcd);
-
 err_pm_runtime:
 	disable_put_regulator(pdata);
 	pm_runtime_put_sync(dev);
@@ -454,14 +297,6 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
 	iounmap(hcd->regs);
 	usb_put_hcd(hcd);
 
-	clk_put(utmi_p1_fck);
-	clk_put(utmi_p2_fck);
-	clk_put(xclk60mhsp1_ck);
-	clk_put(xclk60mhsp2_ck);
-	clk_put(usbhost_p1_fck);
-	clk_put(usbhost_p2_fck);
-	clk_put(init_60m_fclk);
-
 	pm_runtime_put_sync(dev);
 	pm_runtime_disable(dev);
 
@@ -532,7 +367,7 @@ static const struct hc_driver ehci_omap_hc_driver = {
 	 * root hub support
 	 */
 	.hub_status_data	= ehci_hub_status_data,
-	.hub_control		= omap_ehci_hub_control,
+	.hub_control		= ehci_hub_control,
 	.bus_suspend		= ehci_bus_suspend,
 	.bus_resume		= ehci_bus_resume,
 

drivers/usb/host/ehci-sead3.c

@@ -40,7 +40,7 @@ static int ehci_sead3_setup(struct usb_hcd *hcd)
 	ehci->need_io_watchdog = 0;
 
 	/* Set burst length to 16 words. */
-	ehci_writel(ehci, 0x1010, &ehci->regs->reserved[1]);
+	ehci_writel(ehci, 0x1010, &ehci->regs->reserved1[1]);
 
 	return ret;
 }

drivers/usb/host/ehci-tegra.c

@@ -799,11 +799,12 @@ static int tegra_ehci_remove(struct platform_device *pdev)
 #endif
 
 	usb_remove_hcd(hcd);
-	usb_put_hcd(hcd);
 
 	tegra_usb_phy_close(tegra->phy);
 	iounmap(hcd->regs);
 
+	usb_put_hcd(hcd);
+
 	clk_disable_unprepare(tegra->clk);
 	clk_put(tegra->clk);
 

drivers/usb/host/isp1362-hcd.c

@@ -543,12 +543,12 @@ static void postproc_ep(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep)
 			    usb_pipein(urb->pipe) ? "IN" : "OUT", ep->nextpid,
 			    short_ok ? "" : "not_",
 			    PTD_GET_COUNT(ptd), ep->maxpacket, len);
+			/* save the data underrun error code for later and
+			 * proceed with the status stage
+			 */
+			urb->actual_length += PTD_GET_COUNT(ptd);
 			if (usb_pipecontrol(urb->pipe)) {
 				ep->nextpid = USB_PID_ACK;
-				/* save the data underrun error code for later and
-				 * proceed with the status stage
-				 */
-				urb->actual_length += PTD_GET_COUNT(ptd);
 				BUG_ON(urb->actual_length > urb->transfer_buffer_length);
 
 				if (urb->status == -EINPROGRESS)

drivers/usb/host/pci-quirks.c

@@ -800,6 +800,13 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
 }
 EXPORT_SYMBOL_GPL(usb_enable_xhci_ports);
 
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev)
+{
+	pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, 0x0);
+	pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, 0x0);
+}
+EXPORT_SYMBOL_GPL(usb_disable_xhci_ports);
+
 /**
  * PCI Quirks for xHCI.
  *

drivers/usb/host/pci-quirks.h

@@ -10,6 +10,7 @@ void usb_amd_quirk_pll_disable(void);
 void usb_amd_quirk_pll_enable(void);
 bool usb_is_intel_switchable_xhci(struct pci_dev *pdev);
 void usb_enable_xhci_ports(struct pci_dev *xhci_pdev);
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
 #else
 static inline void usb_amd_quirk_pll_disable(void) {}
 static inline void usb_amd_quirk_pll_enable(void) {}

drivers/usb/host/xhci-pci.c

@@ -94,11 +94,21 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
 		xhci->limit_active_eps = 64;
 		xhci->quirks |= XHCI_SW_BW_CHECKING;
+		/*
+		 * PPT desktop boards DH77EB and DH77DF will power back on after
+		 * a few seconds of being shutdown.  The fix for this is to
+		 * switch the ports from xHCI to EHCI on shutdown.  We can't use
+		 * DMI information to find those particular boards (since each
+		 * vendor will change the board name), so we have to key off all
+		 * PPT chipsets.
+		 */
+		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
 		xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_VIA)
 		xhci->quirks |= XHCI_RESET_ON_RESUME;

drivers/usb/host/xhci-ring.c

@@ -145,29 +145,37 @@ static void next_trb(struct xhci_hcd *xhci,
  */
 static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring)
 {
-	union xhci_trb *next;
 	unsigned long long addr;
 
 	ring->deq_updates++;
 
-	/* If this is not event ring, there is one more usable TRB */
+	/*
+	 * If this is not event ring, and the dequeue pointer
+	 * is not on a link TRB, there is one more usable TRB
+	 */
 	if (ring->type != TYPE_EVENT &&
 			!last_trb(xhci, ring, ring->deq_seg, ring->dequeue))
 		ring->num_trbs_free++;
-	next = ++(ring->dequeue);
 
-	/* Update the dequeue pointer further if that was a link TRB or we're at
-	 * the end of an event ring segment (which doesn't have link TRBS)
-	 */
-	while (last_trb(xhci, ring, ring->deq_seg, next)) {
-		if (ring->type == TYPE_EVENT &&	last_trb_on_last_seg(xhci,
-				ring, ring->deq_seg, next)) {
-			ring->cycle_state = (ring->cycle_state ? 0 : 1);
+	do {
+		/*
+		 * Update the dequeue pointer further if that was a link TRB or
+		 * we're at the end of an event ring segment (which doesn't have
+		 * link TRBS)
+		 */
+		if (last_trb(xhci, ring, ring->deq_seg, ring->dequeue)) {
+			if (ring->type == TYPE_EVENT &&
+					last_trb_on_last_seg(xhci, ring,
+						ring->deq_seg, ring->dequeue)) {
+				ring->cycle_state = (ring->cycle_state ? 0 : 1);
+			}
+			ring->deq_seg = ring->deq_seg->next;
+			ring->dequeue = ring->deq_seg->trbs;
+		} else {
+			ring->dequeue++;
 		}
-		ring->deq_seg = ring->deq_seg->next;
-		ring->dequeue = ring->deq_seg->trbs;
-		next = ring->dequeue;
-	}
+	} while (last_trb(xhci, ring, ring->deq_seg, ring->dequeue));
+
 	addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue);
 }
 
@@ -2073,8 +2081,8 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
 			trb_comp_code = COMP_SHORT_TX;
 		else
-			xhci_warn(xhci, "WARN Successful completion on short TX: "
-					"needs XHCI_TRUST_TX_LENGTH quirk?\n");
+			xhci_warn_ratelimited(xhci,
+					"WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?\n");
 	case COMP_SHORT_TX:
 		break;
 	case COMP_STOP:

drivers/usb/host/xhci.c

@@ -166,7 +166,7 @@ int xhci_reset(struct xhci_hcd *xhci)
 	xhci_writel(xhci, command, &xhci->op_regs->command);
 
 	ret = handshake(xhci, &xhci->op_regs->command,
-			CMD_RESET, 0, 250 * 1000);
+			CMD_RESET, 0, 10 * 1000 * 1000);
 	if (ret)
 		return ret;
 
@@ -175,7 +175,8 @@ int xhci_reset(struct xhci_hcd *xhci)
 	 * xHCI cannot write to any doorbells or operational registers other
 	 * than status until the "Controller Not Ready" flag is cleared.
 	 */
-	ret = handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000);
+	ret = handshake(xhci, &xhci->op_regs->status,
+			STS_CNR, 0, 10 * 1000 * 1000);
 
 	for (i = 0; i < 2; ++i) {
 		xhci->bus_state[i].port_c_suspend = 0;
@@ -658,6 +659,9 @@ void xhci_shutdown(struct usb_hcd *hcd)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 
+	if (xhci->quirks && XHCI_SPURIOUS_REBOOT)
+		usb_disable_xhci_ports(to_pci_dev(hcd->self.controller));
+
 	spin_lock_irq(&xhci->lock);
 	xhci_halt(xhci);
 	spin_unlock_irq(&xhci->lock);

drivers/usb/host/xhci.h

@@ -1494,6 +1494,7 @@ struct xhci_hcd {
 #define XHCI_TRUST_TX_LENGTH	(1 << 10)
 #define XHCI_LPM_SUPPORT	(1 << 11)
 #define XHCI_INTEL_HOST		(1 << 12)
+#define XHCI_SPURIOUS_REBOOT	(1 << 13)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */
@@ -1537,6 +1538,8 @@ static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
 	dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
 #define xhci_warn(xhci, fmt, args...) \
 	dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
+#define xhci_warn_ratelimited(xhci, fmt, args...) \
+	dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
 
 /* TODO: copied from ehci.h - can be refactored? */
 /* xHCI spec says all registers are little endian */

drivers/usb/musb/Kconfig

@@ -8,7 +8,7 @@ config USB_MUSB_HDRC
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	depends on USB && USB_GADGET
 	select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN)
-	select NOP_USB_XCEIV if (SOC_OMAPTI81XX || SOC_OMAPAM33XX)
+	select NOP_USB_XCEIV if (SOC_TI81XX || SOC_AM33XX)
 	select TWL4030_USB if MACH_OMAP_3430SDP
 	select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
 	select USB_OTG_UTILS
@@ -57,7 +57,7 @@ config USB_MUSB_AM35X
 
 config USB_MUSB_DSPS
 	tristate "TI DSPS platforms"
-	depends on SOC_OMAPTI81XX || SOC_OMAPAM33XX
+	depends on SOC_TI81XX || SOC_AM33XX
 
 config USB_MUSB_BLACKFIN
 	tristate "Blackfin"

drivers/usb/musb/musb_dsps.c

@@ -479,9 +479,9 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
 		ret = -ENODEV;
 		goto err0;
 	}
-	strcpy((u8 *)res->name, "mc");
 	res->parent = NULL;
 	resources[1] = *res;
+	resources[1].name = "mc";
 
 	/* allocate the child platform device */
 	musb = platform_device_alloc("musb-hdrc", -1);
@@ -566,27 +566,28 @@ static int __devinit dsps_probe(struct platform_device *pdev)
 	}
 	platform_set_drvdata(pdev, glue);
 
-	/* create the child platform device for first instances of musb */
-	ret = dsps_create_musb_pdev(glue, 0);
-	if (ret != 0) {
-		dev_err(&pdev->dev, "failed to create child pdev\n");
-		goto err2;
-	}
-
 	/* enable the usbss clocks */
 	pm_runtime_enable(&pdev->dev);
 
 	ret = pm_runtime_get_sync(&pdev->dev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "pm_runtime_get_sync FAILED");
+		goto err2;
+	}
+
+	/* create the child platform device for first instances of musb */
+	ret = dsps_create_musb_pdev(glue, 0);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "failed to create child pdev\n");
 		goto err3;
 	}
 
 	return 0;
 
 err3:
-	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put(&pdev->dev);
 err2:
+	pm_runtime_disable(&pdev->dev);
 	kfree(glue->wrp);
 err1:
 	kfree(glue);

drivers/usb/renesas_usbhs/common.c

@@ -603,12 +603,12 @@ static int usbhsc_resume(struct device *dev)
 	struct usbhs_priv *priv = dev_get_drvdata(dev);
 	struct platform_device *pdev = usbhs_priv_to_pdev(priv);
 
-	usbhs_platform_call(priv, phy_reset, pdev);
-
 	if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
 		usbhsc_power_ctrl(priv, 1);
 
-	usbhsc_hotplug(priv);
+	usbhs_platform_call(priv, phy_reset, pdev);
+
+	usbhsc_drvcllbck_notify_hotplug(pdev);
 
 	return 0;
 }

drivers/usb/renesas_usbhs/mod_host.c

@@ -1266,6 +1266,12 @@ static int usbhsh_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 	return ret;
 }
 
+static int usbhsh_bus_nop(struct usb_hcd *hcd)
+{
+	/* nothing to do */
+	return 0;
+}
+
 static struct hc_driver usbhsh_driver = {
 	.description =		usbhsh_hcd_name,
 	.hcd_priv_size =	sizeof(struct usbhsh_hpriv),
@@ -1290,6 +1296,8 @@ static struct hc_driver usbhsh_driver = {
 	 */
 	.hub_status_data =	usbhsh_hub_status_data,
 	.hub_control =		usbhsh_hub_control,
+	.bus_suspend =		usbhsh_bus_nop,
+	.bus_resume =		usbhsh_bus_nop,
 };
 
 /*

drivers/usb/serial/bus.c

@@ -61,18 +61,23 @@ static int usb_serial_device_probe(struct device *dev)
 		goto exit;
 	}
 
+	/* make sure suspend/resume doesn't race against port_probe */
+	retval = usb_autopm_get_interface(port->serial->interface);
+	if (retval)
+		goto exit;
+
 	driver = port->serial->type;
 	if (driver->port_probe) {
 		retval = driver->port_probe(port);
 		if (retval)
-			goto exit;
+			goto exit_with_autopm;
 	}
 
 	retval = device_create_file(dev, &dev_attr_port_number);
 	if (retval) {
 		if (driver->port_remove)
 			retval = driver->port_remove(port);
-		goto exit;
+		goto exit_with_autopm;
 	}
 
 	minor = port->number;
@@ -81,6 +86,8 @@ static int usb_serial_device_probe(struct device *dev)
 		 "%s converter now attached to ttyUSB%d\n",
 		 driver->description, minor);
 
+exit_with_autopm:
+	usb_autopm_put_interface(port->serial->interface);
 exit:
 	return retval;
 }
@@ -96,6 +103,9 @@ static int usb_serial_device_remove(struct device *dev)
 	if (!port)
 		return -ENODEV;
 
+	/* make sure suspend/resume doesn't race against port_remove */
+	usb_autopm_get_interface(port->serial->interface);
+
 	device_remove_file(&port->dev, &dev_attr_port_number);
 
 	driver = port->serial->type;
@@ -107,6 +117,7 @@ static int usb_serial_device_remove(struct device *dev)
 	dev_info(dev, "%s converter now disconnected from ttyUSB%d\n",
 		 driver->description, minor);
 
+	usb_autopm_put_interface(port->serial->interface);
 	return retval;
 }
 

drivers/usb/serial/ftdi_sio.c

@@ -811,6 +811,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
 	{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
 	{ USB_DEVICE(PI_VID, PI_E861_PID) },
+	{ USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) },
 	{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
 	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },

drivers/usb/serial/ftdi_sio_ids.h

@@ -794,6 +794,13 @@
 #define PI_VID              0x1a72  /* Vendor ID */
 #define PI_E861_PID         0x1008  /* E-861 piezo controller USB connection */
 
+/*
+ * Kondo Kagaku Co.Ltd.
+ * http://www.kondo-robot.com/EN
+ */
+#define KONDO_VID 		0x165c
+#define KONDO_USB_SERIAL_PID	0x0002
+
 /*
  * Bayer Ascensia Contour blood glucose meter USB-converter cable.
  * http://winglucofacts.com/cables/

drivers/usb/serial/ipw.c

@@ -227,7 +227,6 @@ static void ipw_release(struct usb_serial *serial)
 {
 	struct usb_wwan_intf_private *data = usb_get_serial_data(serial);
 
-	usb_wwan_release(serial);
 	usb_set_serial_data(serial, NULL);
 	kfree(data);
 }
@@ -309,12 +308,12 @@ static struct usb_serial_driver ipw_device = {
 	.description =		"IPWireless converter",
 	.id_table =		id_table,
 	.num_ports =		1,
-	.disconnect =		usb_wwan_disconnect,
 	.open =			ipw_open,
 	.close =		ipw_close,
 	.probe =		ipw_probe,
 	.attach =		usb_wwan_startup,
 	.release =		ipw_release,
+	.port_remove =		usb_wwan_port_remove,
 	.dtr_rts =		ipw_dtr_rts,
 	.write =		usb_wwan_write,
 };

drivers/usb/serial/mos7840.c

@@ -82,8 +82,7 @@
  * Defines used for sending commands to port
  */
 
-#define WAIT_FOR_EVER   (HZ * 0)	/* timeout urb is wait for ever */
-#define MOS_WDR_TIMEOUT (HZ * 5)	/* default urb timeout */
+#define MOS_WDR_TIMEOUT		5000	/* default urb timeout */
 
 #define MOS_PORT1       0x0200
 #define MOS_PORT2       0x0300
@@ -1232,9 +1231,12 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty)
 		return 0;
 
 	spin_lock_irqsave(&mos7840_port->pool_lock, flags);
-	for (i = 0; i < NUM_URBS; ++i)
-		if (mos7840_port->busy[i])
-			chars += URB_TRANSFER_BUFFER_SIZE;
+	for (i = 0; i < NUM_URBS; ++i) {
+		if (mos7840_port->busy[i]) {
+			struct urb *urb = mos7840_port->write_urb_pool[i];
+			chars += urb->transfer_buffer_length;
+		}
+	}
 	spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
 	dbg("%s - returns %d", __func__, chars);
 	return chars;
@@ -1344,7 +1346,7 @@ static void mos7840_close(struct usb_serial_port *port)
 static void mos7840_block_until_chase_response(struct tty_struct *tty,
 					struct moschip_port *mos7840_port)
 {
-	int timeout = 1 * HZ;
+	int timeout = msecs_to_jiffies(1000);
 	int wait = 10;
 	int count;
 
@@ -2672,7 +2674,7 @@ static int mos7840_startup(struct usb_serial *serial)
 
 	/* setting configuration feature to one */
 	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			(__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5 * HZ);
+			(__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, MOS_WDR_TIMEOUT);
 	return 0;
 error:
 	for (/* nothing */; i >= 0; i--) {

drivers/usb/serial/qcserial.c

@@ -199,43 +199,49 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 
 	/* default to enabling interface */
 	altsetting = 0;
-	switch (ifnum) {
-		/* Composite mode; don't bind to the QMI/net interface as that
-		 * gets handled by other drivers.
-		 */
 
+	/* Composite mode; don't bind to the QMI/net interface as that
+	 * gets handled by other drivers.
+	 */
+
+	if (is_gobi1k) {
 		/* Gobi 1K USB layout:
 		 * 0: serial port (doesn't respond)
 		 * 1: serial port (doesn't respond)
 		 * 2: AT-capable modem port
 		 * 3: QMI/net
-		 *
-		 * Gobi 2K+ USB layout:
+		 */
+		if (ifnum == 2)
+			dev_dbg(dev, "Modem port found\n");
+		else
+			altsetting = -1;
+	} else {
+		/* Gobi 2K+ USB layout:
 		 * 0: QMI/net
 		 * 1: DM/DIAG (use libqcdm from ModemManager for communication)
 		 * 2: AT-capable modem port
 		 * 3: NMEA
 		 */
-
-	case 1:
-		if (is_gobi1k)
+		switch (ifnum) {
+		case 0:
+			/* Don't claim the QMI/net interface */
 			altsetting = -1;
-		else
+			break;
+		case 1:
 			dev_dbg(dev, "Gobi 2K+ DM/DIAG interface found\n");
-		break;
-	case 2:
-		dev_dbg(dev, "Modem port found\n");
-		break;
-	case 3:
-		if (is_gobi1k)
-			altsetting = -1;
-		else
+			break;
+		case 2:
+			dev_dbg(dev, "Modem port found\n");
+			break;
+		case 3:
 			/*
 			 * NMEA (serial line 9600 8N1)
 			 * # echo "\$GPS_START" > /dev/ttyUSBx
 			 * # echo "\$GPS_STOP"  > /dev/ttyUSBx
 			 */
 			dev_dbg(dev, "Gobi 2K+ NMEA GPS interface found\n");
+			break;
+		}
 	}
 
 done:
@@ -262,8 +268,7 @@ static void qc_release(struct usb_serial *serial)
 {
 	struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
 
-	/* Call usb_wwan release & free the private data allocated in qcprobe */
-	usb_wwan_release(serial);
+	/* Free the private data allocated in qcprobe */
 	usb_set_serial_data(serial, NULL);
 	kfree(priv);
 }
@@ -283,8 +288,8 @@ static struct usb_serial_driver qcdevice = {
 	.write_room	     = usb_wwan_write_room,
 	.chars_in_buffer     = usb_wwan_chars_in_buffer,
 	.attach		     = usb_wwan_startup,
-	.disconnect	     = usb_wwan_disconnect,
 	.release	     = qc_release,
+	.port_remove	     = usb_wwan_port_remove,
 #ifdef CONFIG_PM
 	.suspend	     = usb_wwan_suspend,
 	.resume		     = usb_wwan_resume,

drivers/usb/serial/usb-wwan.h

@@ -9,8 +9,7 @@ extern void usb_wwan_dtr_rts(struct usb_serial_port *port, int on);
 extern int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port);
 extern void usb_wwan_close(struct usb_serial_port *port);
 extern int usb_wwan_startup(struct usb_serial *serial);
-extern void usb_wwan_disconnect(struct usb_serial *serial);
-extern void usb_wwan_release(struct usb_serial *serial);
+extern int usb_wwan_port_remove(struct usb_serial_port *port);
 extern int usb_wwan_write_room(struct tty_struct *tty);
 extern void usb_wwan_set_termios(struct tty_struct *tty,
 				 struct usb_serial_port *port,

drivers/usb/serial/usb_wwan.c

@@ -565,62 +565,52 @@ int usb_wwan_startup(struct usb_serial *serial)
 }
 EXPORT_SYMBOL(usb_wwan_startup);
 
-static void stop_read_write_urbs(struct usb_serial *serial)
+int usb_wwan_port_remove(struct usb_serial_port *port)
 {
-	int i, j;
-	struct usb_serial_port *port;
+	int i;
 	struct usb_wwan_port_private *portdata;
 
-	/* Stop reading/writing urbs */
-	for (i = 0; i < serial->num_ports; ++i) {
-		port = serial->port[i];
-		portdata = usb_get_serial_port_data(port);
-		for (j = 0; j < N_IN_URB; j++)
-			usb_kill_urb(portdata->in_urbs[j]);
-		for (j = 0; j < N_OUT_URB; j++)
-			usb_kill_urb(portdata->out_urbs[j]);
+	portdata = usb_get_serial_port_data(port);
+	usb_set_serial_port_data(port, NULL);
+
+	/* Stop reading/writing urbs and free them */
+	for (i = 0; i < N_IN_URB; i++) {
+		usb_kill_urb(portdata->in_urbs[i]);
+		usb_free_urb(portdata->in_urbs[i]);
+		free_page((unsigned long)portdata->in_buffer[i]);
+	}
+	for (i = 0; i < N_OUT_URB; i++) {
+		usb_kill_urb(portdata->out_urbs[i]);
+		usb_free_urb(portdata->out_urbs[i]);
+		kfree(portdata->out_buffer[i]);
 	}
-}
 
-void usb_wwan_disconnect(struct usb_serial *serial)
-{
-	stop_read_write_urbs(serial);
+	/* Now free port private data */
+	kfree(portdata);
+	return 0;
 }
-EXPORT_SYMBOL(usb_wwan_disconnect);
+EXPORT_SYMBOL(usb_wwan_port_remove);
 
-void usb_wwan_release(struct usb_serial *serial)
+#ifdef CONFIG_PM
+static void stop_read_write_urbs(struct usb_serial *serial)
 {
 	int i, j;
 	struct usb_serial_port *port;
 	struct usb_wwan_port_private *portdata;
 
-	/* Now free them */
+	/* Stop reading/writing urbs */
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
 		portdata = usb_get_serial_port_data(port);
-
-		for (j = 0; j < N_IN_URB; j++) {
-			usb_free_urb(portdata->in_urbs[j]);
-			free_page((unsigned long)
-				  portdata->in_buffer[j]);
-			portdata->in_urbs[j] = NULL;
-		}
-		for (j = 0; j < N_OUT_URB; j++) {
-			usb_free_urb(portdata->out_urbs[j]);
-			kfree(portdata->out_buffer[j]);
-			portdata->out_urbs[j] = NULL;
-		}
-	}
-
-	/* Now free per port private data */
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		kfree(usb_get_serial_port_data(port));
+		if (!portdata)
+			continue;
+		for (j = 0; j < N_IN_URB; j++)
+			usb_kill_urb(portdata->in_urbs[j]);
+		for (j = 0; j < N_OUT_URB; j++)
+			usb_kill_urb(portdata->out_urbs[j]);
 	}
 }
-EXPORT_SYMBOL(usb_wwan_release);
 
-#ifdef CONFIG_PM
 int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message)
 {
 	struct usb_wwan_intf_private *intfdata = serial->private;
@@ -712,7 +702,7 @@ int usb_wwan_resume(struct usb_serial *serial)
 
 		/* skip closed ports */
 		spin_lock_irq(&intfdata->susp_lock);
-		if (!portdata->opened) {
+		if (!portdata || !portdata->opened) {
 			spin_unlock_irq(&intfdata->susp_lock);
 			continue;
 		}