Commit 913b7373 authored by Joel Stanley's avatar Joel Stanley Committed by Greg Kroah-Hartman

fsi: aspeed: Add trace points

These trace points help with debugging the FSI master. They show the low
level reads, writes and error states of the master.
Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-11-joel@jms.id.auSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 606397d6
......@@ -77,6 +77,9 @@ static const u32 fsi_base = 0xa0000000;
#define XFER_HALFWORD (BIT(0))
#define XFER_BYTE (0)
#define CREATE_TRACE_POINTS
#include <trace/events/fsi_master_aspeed.h>
#define FSI_LINK_ENABLE_SETUP_TIME 10 /* in mS */
#define DEFAULT_DIVISOR 14
......@@ -102,6 +105,8 @@ static int __opb_write(struct fsi_master_aspeed *aspeed, u32 addr,
status = readl(base + OPB0_STATUS);
trace_fsi_master_aspeed_opb_write(addr, val, transfer_size, status, reg);
/* Return error when poll timed out */
if (ret)
return ret;
......@@ -149,6 +154,10 @@ static int __opb_read(struct fsi_master_aspeed *aspeed, uint32_t addr,
result = readl(base + OPB0_FSI_DATA_R);
trace_fsi_master_aspeed_opb_read(addr, transfer_size, result,
readl(base + OPB0_STATUS),
reg);
/* Return error when poll timed out */
if (ret)
return ret;
......@@ -196,6 +205,19 @@ static int check_errors(struct fsi_master_aspeed *aspeed, int err)
{
int ret;
if (trace_fsi_master_aspeed_opb_error_enabled()) {
__be32 mresp0, mstap0, mesrb0;
opb_readl(aspeed, ctrl_base + FSI_MRESP0, &mresp0);
opb_readl(aspeed, ctrl_base + FSI_MSTAP0, &mstap0);
opb_readl(aspeed, ctrl_base + FSI_MESRB0, &mesrb0);
trace_fsi_master_aspeed_opb_error(
be32_to_cpu(mresp0),
be32_to_cpu(mstap0),
be32_to_cpu(mesrb0));
}
if (err == -EIO) {
/* Check MAEB (0x70) ? */
......
/* SPDX-License-Identifier: GPL-2.0-or-later */
#undef TRACE_SYSTEM
#define TRACE_SYSTEM fsi_master_aspeed
#if !defined(_TRACE_FSI_MASTER_ASPEED_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_FSI_MASTER_ASPEED_H
#include <linux/tracepoint.h>
TRACE_EVENT(fsi_master_aspeed_opb_read,
TP_PROTO(uint32_t addr, size_t size, uint32_t result, uint32_t status, uint32_t irq_status),
TP_ARGS(addr, size, result, status, irq_status),
TP_STRUCT__entry(
__field(uint32_t, addr)
__field(size_t, size)
__field(uint32_t, result)
__field(uint32_t, status)
__field(uint32_t, irq_status)
),
TP_fast_assign(
__entry->addr = addr;
__entry->size = size;
__entry->result = result;
__entry->status = status;
__entry->irq_status = irq_status;
),
TP_printk("addr %08x size %zu: result %08x sts: %08x irq_sts: %08x",
__entry->addr, __entry->size, __entry->result,
__entry->status, __entry->irq_status
)
);
TRACE_EVENT(fsi_master_aspeed_opb_write,
TP_PROTO(uint32_t addr, uint32_t val, size_t size, uint32_t status, uint32_t irq_status),
TP_ARGS(addr, val, size, status, irq_status),
TP_STRUCT__entry(
__field(uint32_t, addr)
__field(uint32_t, val)
__field(size_t, size)
__field(uint32_t, status)
__field(uint32_t, irq_status)
),
TP_fast_assign(
__entry->addr = addr;
__entry->val = val;
__entry->size = size;
__entry->status = status;
__entry->irq_status = irq_status;
),
TP_printk("addr %08x val %08x size %zu status: %08x irq_sts: %08x",
__entry->addr, __entry->val, __entry->size,
__entry->status, __entry->irq_status
)
);
TRACE_EVENT(fsi_master_aspeed_opb_error,
TP_PROTO(uint32_t mresp0, uint32_t mstap0, uint32_t mesrb0),
TP_ARGS(mresp0, mstap0, mesrb0),
TP_STRUCT__entry(
__field(uint32_t, mresp0)
__field(uint32_t, mstap0)
__field(uint32_t, mesrb0)
),
TP_fast_assign(
__entry->mresp0 = mresp0;
__entry->mstap0 = mstap0;
__entry->mesrb0 = mesrb0;
),
TP_printk("mresp0 %08x mstap0 %08x mesrb0 %08x",
__entry->mresp0, __entry->mstap0, __entry->mesrb0
)
);
#endif
#include <trace/define_trace.h>
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment