Commit 91a6c462 authored by H. Peter Anvin's avatar H. Peter Anvin Committed by Linus Torvalds

Use the new x86 setup code for x86-64; unify with i386

This unifies arch/*/boot (except arch/*/boot/compressed) between
i386 and x86-64, and uses the new x86 setup code for x86-64 as well.
Signed-off-by: default avatarH. Peter Anvin <hpa@zytor.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 4fd06960
#
# arch/x86_64/boot/Makefile
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1994 by Linus Torvalds
#
# ROOT_DEV specifies the default root-device when making the image.
# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
# the default of FLOPPY is used by 'build'.
ROOT_DEV := CURRENT
# If you want to preset the SVGA mode, uncomment the next line and
# set SVGA_MODE to whatever number you want.
# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
# The number is the same as you would ordinarily press at bootup.
SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
# If you want the RAM disk device, define this to be the size in blocks.
#RAMDISK := -DRAMDISK=512
targets := vmlinux.bin bootsect bootsect.o \
setup setup.o bzImage mtools.conf
EXTRA_CFLAGS := -m32
hostprogs-y := tools/build
HOST_EXTRACFLAGS += $(LINUXINCLUDE)
subdir- := compressed/ #Let make clean descend in compressed/
# ---------------------------------------------------------------------------
$(obj)/bzImage: IMAGE_OFFSET := 0x100000
$(obj)/bzImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
$(obj)/bzImage: BUILDFLAGS := -b
quiet_cmd_image = BUILD $@
cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/bootsect $(obj)/setup \
$(obj)/vmlinux.bin $(ROOT_DEV) > $@
$(obj)/bzImage: $(obj)/bootsect $(obj)/setup \
$(obj)/vmlinux.bin $(obj)/tools/build FORCE
$(call if_changed,image)
@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
$(call if_changed,objcopy)
LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary
LDFLAGS_setup := -Ttext 0x0 -s --oformat binary -e begtext
$(obj)/setup $(obj)/bootsect: %: %.o FORCE
$(call if_changed,ld)
$(obj)/compressed/vmlinux: FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel
FDARGS =
# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel
FDINITRD =
image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,)
$(obj)/mtools.conf: $(src)/mtools.conf.in
sed -e 's|@OBJ@|$(obj)|g' < $< > $@
# This requires write access to /dev/fd0
zdisk: $(BOOTIMAGE) $(obj)/mtools.conf
MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync
syslinux /dev/fd0 ; sync
echo '$(image_cmdline)' | \
MTOOLSRC=$(obj)/mtools.conf mcopy - a:syslinux.cfg
if [ -f '$(FDINITRD)' ] ; then \
MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \
fi
MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync
# These require being root or having syslinux 2.02 or higher installed
fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf
dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440
MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync
syslinux $(obj)/fdimage ; sync
echo '$(image_cmdline)' | \
MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg
if [ -f '$(FDINITRD)' ] ; then \
MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \
fi
MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync
fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf
dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880
MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync
syslinux $(obj)/fdimage ; sync
echo '$(image_cmdline)' | \
MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg
if [ -f '$(FDINITRD)' ] ; then \
MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \
fi
MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync
isoimage: $(BOOTIMAGE)
-rm -rf $(obj)/isoimage
mkdir $(obj)/isoimage
for i in lib lib64 share end ; do \
if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \
cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \
break ; \
fi ; \
if [ $$i = end ] ; then exit 1 ; fi ; \
done
cp $(BOOTIMAGE) $(obj)/isoimage/linux
echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg
if [ -f '$(FDINITRD)' ] ; then \
cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \
fi
mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \
-no-emul-boot -boot-load-size 4 -boot-info-table \
$(obj)/isoimage
rm -rf $(obj)/isoimage
zlilo: $(BOOTIMAGE)
if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
cat $(BOOTIMAGE) > $(INSTALL_PATH)/vmlinuz
cp System.map $(INSTALL_PATH)/
if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
# The actual boot code is shared with i386 including the Makefile.
# So tell kbuild that we fetch the code from i386 and include the
# Makefile from i386 too.
install:
sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
src := arch/i386/boot
include $(src)/Makefile
/*
* bootsect.S Copyright (C) 1991, 1992 Linus Torvalds
*
* modified by Drew Eckhardt
* modified by Bruce Evans (bde)
* modified by Chris Noe (May 1999) (as86 -> gas)
* gutted by H. Peter Anvin (Jan 2003)
*
* BIG FAT NOTE: We're in real mode using 64k segments. Therefore segment
* addresses must be multiplied by 16 to obtain their respective linear
* addresses. To avoid confusion, linear addresses are written using leading
* hex while segment addresses are written as segment:offset.
*
*/
#include <asm/boot.h>
SETUPSECTS = 4 /* default nr of setup-sectors */
BOOTSEG = 0x07C0 /* original address of boot-sector */
INITSEG = DEF_INITSEG /* we move boot here - out of the way */
SETUPSEG = DEF_SETUPSEG /* setup starts here */
SYSSEG = DEF_SYSSEG /* system loaded at 0x10000 (65536) */
SYSSIZE = DEF_SYSSIZE /* system size: # of 16-byte clicks */
/* to be loaded */
ROOT_DEV = 0 /* ROOT_DEV is now written by "build" */
SWAP_DEV = 0 /* SWAP_DEV is now written by "build" */
#ifndef SVGA_MODE
#define SVGA_MODE ASK_VGA
#endif
#ifndef RAMDISK
#define RAMDISK 0
#endif
#ifndef ROOT_RDONLY
#define ROOT_RDONLY 1
#endif
.code16
.text
.global _start
_start:
# Normalize the start address
jmpl $BOOTSEG, $start2
start2:
movw %cs, %ax
movw %ax, %ds
movw %ax, %es
movw %ax, %ss
movw $0x7c00, %sp
sti
cld
movw $bugger_off_msg, %si
msg_loop:
lodsb
andb %al, %al
jz die
movb $0xe, %ah
movw $7, %bx
int $0x10
jmp msg_loop
die:
# Allow the user to press a key, then reboot
xorw %ax, %ax
int $0x16
int $0x19
# int 0x19 should never return. In case it does anyway,
# invoke the BIOS reset code...
ljmp $0xf000,$0xfff0
bugger_off_msg:
.ascii "Direct booting from floppy is no longer supported.\r\n"
.ascii "Please use a boot loader program instead.\r\n"
.ascii "\n"
.ascii "Remove disk and press any key to reboot . . .\r\n"
.byte 0
# Kernel attributes; used by setup
.org 497
setup_sects: .byte SETUPSECTS
root_flags: .word ROOT_RDONLY
syssize: .word SYSSIZE
swap_dev: .word SWAP_DEV
ram_size: .word RAMDISK
vid_mode: .word SVGA_MODE
root_dev: .word ROOT_DEV
boot_flag: .word 0xAA55
......@@ -7,11 +7,12 @@
#
targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
EXTRA_AFLAGS := -traditional
# cannot use EXTRA_CFLAGS because base CFLAGS contains -mkernel which conflicts with
# -m32
CFLAGS := -m64 -D__KERNEL__ -Iinclude -O2 -fno-strict-aliasing -fPIC -mcmodel=small -fno-builtin
CFLAGS := -m64 -D__KERNEL__ $(LINUXINCLUDE) -O2 \
-fno-strict-aliasing -fPIC -mcmodel=small \
$(call cc-option, -ffreestanding) \
$(call cc-option, -fno-stack-protector)
AFLAGS := $(CFLAGS) -D__ASSEMBLY__
LDFLAGS := -m elf_x86_64
LDFLAGS_vmlinux := -T
......
#!/bin/sh
. $srctree/arch/i386/boot/install.sh
#
# mtools configuration file for "make (b)zdisk"
#
# Actual floppy drive
drive a:
file="/dev/fd0"
# 1.44 MB floppy disk image
drive v:
file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=18 filter
# 2.88 MB floppy disk image (mostly for virtual uses)
drive w:
file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=36 filter
This diff is collapsed.
/*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright (C) 1997 Martin Mares
*/
/*
* This file builds a disk-image from three different files:
*
* - bootsect: compatibility mbr which prints an error message if
* someone tries to boot the kernel directly.
* - setup: 8086 machine code, sets up system parm
* - system: 80386 code for actual system
*
* It does some checking that all files are of the correct type, and
* just writes the result to stdout, removing headers and padding to
* the right amount. It also writes some system data to stderr.
*/
/*
* Changes by tytso to allow root device specification
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
* Cross compiling fixes by Gertjan van Wingerde, July 1996
* Rewritten by Martin Mares, April 1997
*/
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <stdarg.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/sysmacros.h>
#include <unistd.h>
#include <fcntl.h>
#include <asm/boot.h>
typedef unsigned char byte;
typedef unsigned short word;
typedef unsigned long u32;
#define DEFAULT_MAJOR_ROOT 0
#define DEFAULT_MINOR_ROOT 0
/* Minimal number of setup sectors (see also bootsect.S) */
#define SETUP_SECTS 4
byte buf[1024];
int fd;
int is_big_kernel;
void die(const char * str, ...)
{
va_list args;
va_start(args, str);
vfprintf(stderr, str, args);
fputc('\n', stderr);
exit(1);
}
void file_open(const char *name)
{
if ((fd = open(name, O_RDONLY, 0)) < 0)
die("Unable to open `%s': %m", name);
}
void usage(void)
{
die("Usage: build [-b] bootsect setup system [rootdev] [> image]");
}
int main(int argc, char ** argv)
{
unsigned int i, c, sz, setup_sectors;
u32 sys_size;
byte major_root, minor_root;
struct stat sb;
if (argc > 2 && !strcmp(argv[1], "-b"))
{
is_big_kernel = 1;
argc--, argv++;
}
if ((argc < 4) || (argc > 5))
usage();
if (argc > 4) {
if (!strcmp(argv[4], "CURRENT")) {
if (stat("/", &sb)) {
perror("/");
die("Couldn't stat /");
}
major_root = major(sb.st_dev);
minor_root = minor(sb.st_dev);
} else if (strcmp(argv[4], "FLOPPY")) {
if (stat(argv[4], &sb)) {
perror(argv[4]);
die("Couldn't stat root device.");
}
major_root = major(sb.st_rdev);
minor_root = minor(sb.st_rdev);
} else {
major_root = 0;
minor_root = 0;
}
} else {
major_root = DEFAULT_MAJOR_ROOT;
minor_root = DEFAULT_MINOR_ROOT;
}
fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
file_open(argv[1]);
i = read(fd, buf, sizeof(buf));
fprintf(stderr,"Boot sector %d bytes.\n",i);
if (i != 512)
die("Boot block must be exactly 512 bytes");
if (buf[510] != 0x55 || buf[511] != 0xaa)
die("Boot block hasn't got boot flag (0xAA55)");
buf[508] = minor_root;
buf[509] = major_root;
if (write(1, buf, 512) != 512)
die("Write call failed");
close (fd);
file_open(argv[2]); /* Copy the setup code */
for (i=0 ; (c=read(fd, buf, sizeof(buf)))>0 ; i+=c )
if (write(1, buf, c) != c)
die("Write call failed");
if (c != 0)
die("read-error on `setup'");
close (fd);
setup_sectors = (i + 511) / 512; /* Pad unused space with zeros */
/* for compatibility with ancient versions of LILO. */
if (setup_sectors < SETUP_SECTS)
setup_sectors = SETUP_SECTS;
fprintf(stderr, "Setup is %d bytes.\n", i);
memset(buf, 0, sizeof(buf));
while (i < setup_sectors * 512) {
c = setup_sectors * 512 - i;
if (c > sizeof(buf))
c = sizeof(buf);
if (write(1, buf, c) != c)
die("Write call failed");
i += c;
}
file_open(argv[3]);
if (fstat (fd, &sb))
die("Unable to stat `%s': %m", argv[3]);
sz = sb.st_size;
fprintf (stderr, "System is %d kB\n", sz/1024);
sys_size = (sz + 15) / 16;
if (!is_big_kernel && sys_size > DEF_SYSSIZE)
die("System is too big. Try using bzImage or modules.");
while (sz > 0) {
int l, n;
l = (sz > sizeof(buf)) ? sizeof(buf) : sz;
if ((n=read(fd, buf, l)) != l) {
if (n < 0)
die("Error reading %s: %m", argv[3]);
else
die("%s: Unexpected EOF", argv[3]);
}
if (write(1, buf, l) != l)
die("Write failed");
sz -= l;
}
close(fd);
if (lseek(1, 497, SEEK_SET) != 497) /* Write sizes to the bootsector */
die("Output: seek failed");
buf[0] = setup_sectors;
if (write(1, buf, 1) != 1)
die("Write of setup sector count failed");
if (lseek(1, 500, SEEK_SET) != 500)
die("Output: seek failed");
buf[0] = (sys_size & 0xff);
buf[1] = ((sys_size >> 8) & 0xff);
buf[2] = ((sys_size >> 16) & 0xff);
buf[3] = ((sys_size >> 24) & 0xff);
if (write(1, buf, 4) != 4)
die("Write of image length failed");
return 0; /* Everything is OK */
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment