Skip to content

L
linux
Commit 91dc1e5d authored by Michal Kosiarz's avatar Michal Kosiarz Committed by Jeff Kirsher
Browse files
Options

i40e: Add Clause22 implementation 

Some external PHYs require Clause22 method for accessing registers.
This patch also adds some defines to support blink led on devices using
10CBaseT PHY.

Change-ID: I868a4326911900f6c89e7e522fda4968b0825f14
Signed-off-by: default avatarMichal Kosiarz <michal.kosiarz@intel.com>
Signed-off-by: default avatarMatt Jared <matthew.a.jared@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent d182a5ca
Hide whitespace changes
Inline Side-by-side
Showing with 159 additions and 52 deletions
drivers/net/ethernet/intel/i40e/i40e_common.c
View file @ 91dc1e5d
......@@ -4396,7 +4396,99 @@ i40e_status i40e_aq_configure_partition_bw(struct i40e_hw *hw,
}
/**
* i40e_read_phy_register
* i40e_read_phy_register_clause22
* @hw: pointer to the HW structure
* @reg: register address in the page
* @phy_adr: PHY address on MDIO interface
* @value: PHY register value
*
* Reads specified PHY register value
**/
i40e_status i40e_read_phy_register_clause22(struct i40e_hw *hw,
u16 reg, u8 phy_addr, u16 *value)
{
i40e_status status = I40E_ERR_TIMEOUT;
u8 port_num = (u8)hw->func_caps.mdio_port_num;
u32 command = 0;
u16 retry = 1000;
command = (reg << I40E_GLGEN_MSCA_DEVADD_SHIFT) |
(phy_addr << I40E_GLGEN_MSCA_PHYADD_SHIFT) |
(I40E_MDIO_CLAUSE22_OPCODE_READ_MASK) |
(I40E_MDIO_CLAUSE22_STCODE_MASK) |
(I40E_GLGEN_MSCA_MDICMD_MASK);
wr32(hw, I40E_GLGEN_MSCA(port_num), command);
do {
command = rd32(hw, I40E_GLGEN_MSCA(port_num));
if (!(command & I40E_GLGEN_MSCA_MDICMD_MASK)) {
status = 0;
break;
}
udelay(10);
retry--;
} while (retry);
if (status) {
i40e_debug(hw, I40E_DEBUG_PHY,
"PHY: Can't write command to external PHY.\n");
goto phy_read_end;
}
if (!status) {
command = rd32(hw, I40E_GLGEN_MSRWD(port_num));
*value = (command & I40E_GLGEN_MSRWD_MDIRDDATA_MASK) >>
I40E_GLGEN_MSRWD_MDIRDDATA_SHIFT;
} else {
i40e_debug(hw, I40E_DEBUG_PHY,
"PHY: Can't read register value from external PHY.\n");
}
phy_read_end:
return status;
}
/**
* i40e_write_phy_register_clause22
* @hw: pointer to the HW structure
* @reg: register address in the page
* @phy_adr: PHY address on MDIO interface
* @value: PHY register value
*
* Writes specified PHY register value
**/
i40e_status i40e_write_phy_register_clause22(struct i40e_hw *hw,
u16 reg, u8 phy_addr, u16 value)
{
i40e_status status = I40E_ERR_TIMEOUT;
u8 port_num = (u8)hw->func_caps.mdio_port_num;
u32 command = 0;
u16 retry = 1000;
command = value << I40E_GLGEN_MSRWD_MDIWRDATA_SHIFT;
wr32(hw, I40E_GLGEN_MSRWD(port_num), command);
command = (reg << I40E_GLGEN_MSCA_DEVADD_SHIFT) |
(phy_addr << I40E_GLGEN_MSCA_PHYADD_SHIFT) |
(I40E_MDIO_CLAUSE22_OPCODE_WRITE_MASK) |
(I40E_MDIO_CLAUSE22_STCODE_MASK) |
(I40E_GLGEN_MSCA_MDICMD_MASK);
wr32(hw, I40E_GLGEN_MSCA(port_num), command);
do {
command = rd32(hw, I40E_GLGEN_MSCA(port_num));
if (!(command & I40E_GLGEN_MSCA_MDICMD_MASK)) {
status = 0;
break;
}
udelay(10);
retry--;
} while (retry);
return status;
}
/**
* i40e_read_phy_register_clause45
* @hw: pointer to the HW structure
* @page: registers page number
* @reg: register address in the page
......@@ -4405,9 +4497,8 @@ i40e_status i40e_aq_configure_partition_bw(struct i40e_hw *hw,
*
* Reads specified PHY register value
**/
i40e_status i40e_read_phy_register(struct i40e_hw *hw,
u8 page, u16 reg, u8 phy_addr,
u16 *value)
i40e_status i40e_read_phy_register_clause45(struct i40e_hw *hw,
u8 page, u16 reg, u8 phy_addr, u16 *value)
{
i40e_status status = I40E_ERR_TIMEOUT;
u32 command = 0;
......@@ -4417,8 +4508,8 @@ i40e_status i40e_read_phy_register(struct i40e_hw *hw,
command = (reg << I40E_GLGEN_MSCA_MDIADD_SHIFT) |
(page << I40E_GLGEN_MSCA_DEVADD_SHIFT) |
(phy_addr << I40E_GLGEN_MSCA_PHYADD_SHIFT) |
(I40E_MDIO_OPCODE_ADDRESS) |
(I40E_MDIO_STCODE) |
(I40E_MDIO_CLAUSE45_OPCODE_ADDRESS_MASK) |
(I40E_MDIO_CLAUSE45_STCODE_MASK) |
(I40E_GLGEN_MSCA_MDICMD_MASK) |
(I40E_GLGEN_MSCA_MDIINPROGEN_MASK);
wr32(hw, I40E_GLGEN_MSCA(port_num), command);
......@@ -4440,8 +4531,8 @@ i40e_status i40e_read_phy_register(struct i40e_hw *hw,
command = (page << I40E_GLGEN_MSCA_DEVADD_SHIFT) |
(phy_addr << I40E_GLGEN_MSCA_PHYADD_SHIFT) |
(I40E_MDIO_OPCODE_READ) |
(I40E_MDIO_STCODE) |
(I40E_MDIO_CLAUSE45_OPCODE_READ_MASK) |
(I40E_MDIO_CLAUSE45_STCODE_MASK) |
(I40E_GLGEN_MSCA_MDICMD_MASK) |
(I40E_GLGEN_MSCA_MDIINPROGEN_MASK);
status = I40E_ERR_TIMEOUT;
......@@ -4471,7 +4562,7 @@ i40e_status i40e_read_phy_register(struct i40e_hw *hw,
}
/**
* i40e_write_phy_register
* i40e_write_phy_register_clause45
* @hw: pointer to the HW structure
* @page: registers page number
* @reg: register address in the page
......@@ -4480,9 +4571,8 @@ i40e_status i40e_read_phy_register(struct i40e_hw *hw,
*
* Writes value to specified PHY register
**/
i40e_status i40e_write_phy_register(struct i40e_hw *hw,
u8 page, u16 reg, u8 phy_addr,
u16 value)
i40e_status i40e_write_phy_register_clause45(struct i40e_hw *hw,
u8 page, u16 reg, u8 phy_addr, u16 value)
{
i40e_status status = I40E_ERR_TIMEOUT;
u32 command = 0;
......@@ -4492,8 +4582,8 @@ i40e_status i40e_write_phy_register(struct i40e_hw *hw,
command = (reg << I40E_GLGEN_MSCA_MDIADD_SHIFT) |
(page << I40E_GLGEN_MSCA_DEVADD_SHIFT) |
(phy_addr << I40E_GLGEN_MSCA_PHYADD_SHIFT) |
(I40E_MDIO_OPCODE_ADDRESS) |
(I40E_MDIO_STCODE) |
(I40E_MDIO_CLAUSE45_OPCODE_ADDRESS_MASK) |
(I40E_MDIO_CLAUSE45_STCODE_MASK) |
(I40E_GLGEN_MSCA_MDICMD_MASK) |
(I40E_GLGEN_MSCA_MDIINPROGEN_MASK);
wr32(hw, I40E_GLGEN_MSCA(port_num), command);
......@@ -4517,8 +4607,8 @@ i40e_status i40e_write_phy_register(struct i40e_hw *hw,
command = (page << I40E_GLGEN_MSCA_DEVADD_SHIFT) |
(phy_addr << I40E_GLGEN_MSCA_PHYADD_SHIFT) |
(I40E_MDIO_OPCODE_WRITE) |
(I40E_MDIO_STCODE) |
(I40E_MDIO_CLAUSE45_OPCODE_WRITE_MASK) |
(I40E_MDIO_CLAUSE45_STCODE_MASK) |
(I40E_GLGEN_MSCA_MDICMD_MASK) |
(I40E_GLGEN_MSCA_MDIINPROGEN_MASK);
status = I40E_ERR_TIMEOUT;
......@@ -4580,14 +4670,16 @@ i40e_status i40e_blink_phy_link_led(struct i40e_hw *hw,
for (gpio_led_port = 0; gpio_led_port < 3; gpio_led_port++,
led_addr++) {
status = i40e_read_phy_register(hw, I40E_PHY_COM_REG_PAGE,
led_addr, phy_addr, &led_reg);
status = i40e_read_phy_register_clause45(hw,
I40E_PHY_COM_REG_PAGE,
led_addr, phy_addr,
&led_reg);
if (status)
goto phy_blinking_end;
led_ctl = led_reg;
if (led_reg & I40E_PHY_LED_LINK_MODE_MASK) {
led_reg = 0;
status = i40e_write_phy_register(hw,
status = i40e_write_phy_register_clause45(hw,
I40E_PHY_COM_REG_PAGE,
led_addr, phy_addr,
led_reg);
......@@ -4599,20 +4691,18 @@ i40e_status i40e_blink_phy_link_led(struct i40e_hw *hw,
if (time > 0 && interval > 0) {
for (i = 0; i < time * 1000; i += interval) {
status = i40e_read_phy_register(hw,
I40E_PHY_COM_REG_PAGE,
led_addr, phy_addr,
&led_reg);
status = i40e_read_phy_register_clause45(hw,
I40E_PHY_COM_REG_PAGE,
led_addr, phy_addr, &led_reg);
if (status)
goto restore_config;
if (led_reg & I40E_PHY_LED_MANUAL_ON)
led_reg = 0;
else
led_reg = I40E_PHY_LED_MANUAL_ON;
status = i40e_write_phy_register(hw,
I40E_PHY_COM_REG_PAGE,
led_addr, phy_addr,
led_reg);
status = i40e_write_phy_register_clause45(hw,
I40E_PHY_COM_REG_PAGE,
led_addr, phy_addr, led_reg);
if (status)
goto restore_config;
msleep(interval);
......@@ -4620,8 +4710,9 @@ i40e_status i40e_blink_phy_link_led(struct i40e_hw *hw,
}
restore_config:
status = i40e_write_phy_register(hw, I40E_PHY_COM_REG_PAGE, led_addr,
phy_addr, led_ctl);
status = i40e_write_phy_register_clause45(hw,
I40E_PHY_COM_REG_PAGE,
led_addr, phy_addr, led_ctl);
phy_blinking_end:
return status;
......@@ -4652,8 +4743,10 @@ i40e_status i40e_led_get_phy(struct i40e_hw *hw, u16 *led_addr,
for (gpio_led_port = 0; gpio_led_port < 3; gpio_led_port++,
temp_addr++) {
status = i40e_read_phy_register(hw, I40E_PHY_COM_REG_PAGE,
temp_addr, phy_addr, &reg_val);
status = i40e_read_phy_register_clause45(hw,
I40E_PHY_COM_REG_PAGE,
temp_addr, phy_addr,
&reg_val);
if (status)
return status;
*val = reg_val;
......@@ -4686,41 +4779,42 @@ i40e_status i40e_led_set_phy(struct i40e_hw *hw, bool on,
i = rd32(hw, I40E_PFGEN_PORTNUM);
port_num = (u8)(i & I40E_PFGEN_PORTNUM_PORT_NUM_MASK);
phy_addr = i40e_get_phy_address(hw, port_num);
status = i40e_read_phy_register(hw, I40E_PHY_COM_REG_PAGE, led_addr,
phy_addr, &led_reg);
status = i40e_read_phy_register_clause45(hw, I40E_PHY_COM_REG_PAGE,
led_addr, phy_addr, &led_reg);
if (status)
return status;
led_ctl = led_reg;
if (led_reg & I40E_PHY_LED_LINK_MODE_MASK) {
led_reg = 0;
status = i40e_write_phy_register(hw, I40E_PHY_COM_REG_PAGE,
led_addr, phy_addr, led_reg);
status = i40e_write_phy_register_clause45(hw,
I40E_PHY_COM_REG_PAGE,
led_addr, phy_addr,
led_reg);
if (status)
return status;
}
status = i40e_read_phy_register(hw, I40E_PHY_COM_REG_PAGE,
led_addr, phy_addr, &led_reg);
status = i40e_read_phy_register_clause45(hw, I40E_PHY_COM_REG_PAGE,
led_addr, phy_addr, &led_reg);
if (status)
goto restore_config;
if (on)
led_reg = I40E_PHY_LED_MANUAL_ON;
else
led_reg = 0;
status = i40e_write_phy_register(hw, I40E_PHY_COM_REG_PAGE,
led_addr, phy_addr, led_reg);
status = i40e_write_phy_register_clause45(hw, I40E_PHY_COM_REG_PAGE,
led_addr, phy_addr, led_reg);
if (status)
goto restore_config;
if (mode & I40E_PHY_LED_MODE_ORIG) {
led_ctl = (mode & I40E_PHY_LED_MODE_MASK);
status = i40e_write_phy_register(hw,
status = i40e_write_phy_register_clause45(hw,
I40E_PHY_COM_REG_PAGE,
led_addr, phy_addr, led_ctl);
}
return status;
restore_config:
status = i40e_write_phy_register(hw, I40E_PHY_COM_REG_PAGE, led_addr,
phy_addr, led_ctl);
status = i40e_write_phy_register_clause45(hw, I40E_PHY_COM_REG_PAGE,
led_addr, phy_addr, led_ctl);
return status;
}
......
drivers/net/ethernet/intel/i40e/i40e_prototype.h
View file @ 91dc1e5d
......@@ -362,10 +362,14 @@ i40e_status i40e_aq_rx_ctl_write_register(struct i40e_hw *hw,
u32 reg_addr, u32 reg_val,
struct i40e_asq_cmd_details *cmd_details);
void i40e_write_rx_ctl(struct i40e_hw *hw, u32 reg_addr, u32 reg_val);
i40e_status i40e_read_phy_register(struct i40e_hw *hw, u8 page,
u16 reg, u8 phy_addr, u16 *value);
i40e_status i40e_write_phy_register(struct i40e_hw *hw, u8 page,
u16 reg, u8 phy_addr, u16 value);
i40e_status i40e_read_phy_register_clause22(struct i40e_hw *hw,
u16 reg, u8 phy_addr, u16 *value);
i40e_status i40e_write_phy_register_clause22(struct i40e_hw *hw,
u16 reg, u8 phy_addr, u16 value);
i40e_status i40e_read_phy_register_clause45(struct i40e_hw *hw,
u8 page, u16 reg, u8 phy_addr, u16 *value);
i40e_status i40e_write_phy_register_clause45(struct i40e_hw *hw,
u8 page, u16 reg, u8 phy_addr, u16 value);
u8 i40e_get_phy_address(struct i40e_hw *hw, u8 dev_num);
i40e_status i40e_blink_phy_link_led(struct i40e_hw *hw,
u32 time, u32 interval);
......
drivers/net/ethernet/intel/i40e/i40e_type.h
View file @ 91dc1e5d
......@@ -90,14 +90,23 @@ enum i40e_debug_mask {
I40E_DEBUG_ALL = 0xFFFFFFFF
};
#define I40E_MDIO_STCODE 0
#define I40E_MDIO_OPCODE_ADDRESS 0
#define I40E_MDIO_OPCODE_WRITE I40E_MASK(1, \
#define I40E_MDIO_CLAUSE22_STCODE_MASK I40E_MASK(1, \
I40E_GLGEN_MSCA_STCODE_SHIFT)
#define I40E_MDIO_CLAUSE22_OPCODE_WRITE_MASK I40E_MASK(1, \
I40E_GLGEN_MSCA_OPCODE_SHIFT)
#define I40E_MDIO_OPCODE_READ_INC_ADDR I40E_MASK(2, \
#define I40E_MDIO_CLAUSE22_OPCODE_READ_MASK I40E_MASK(2, \
I40E_GLGEN_MSCA_OPCODE_SHIFT)
#define I40E_MDIO_OPCODE_READ I40E_MASK(3, \
#define I40E_MDIO_CLAUSE45_STCODE_MASK I40E_MASK(0, \
I40E_GLGEN_MSCA_STCODE_SHIFT)
#define I40E_MDIO_CLAUSE45_OPCODE_ADDRESS_MASK I40E_MASK(0, \
I40E_GLGEN_MSCA_OPCODE_SHIFT)
#define I40E_MDIO_CLAUSE45_OPCODE_WRITE_MASK I40E_MASK(1, \
I40E_GLGEN_MSCA_OPCODE_SHIFT)
#define I40E_MDIO_CLAUSE45_OPCODE_READ_INC_ADDR_MASK I40E_MASK(2, \
I40E_GLGEN_MSCA_OPCODE_SHIFT)
#define I40E_MDIO_CLAUSE45_OPCODE_READ_MASK I40E_MASK(3, \
I40E_GLGEN_MSCA_OPCODE_SHIFT)
#define I40E_PHY_COM_REG_PAGE 0x1E
#define I40E_PHY_LED_LINK_MODE_MASK 0xF0
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7