net: macb: Check DMA mappings for error

With CONFIG_DMA_API_DEBUG enabled the following warning is printed:
 WARNING: CPU: 0 PID: 619 at lib/dma-debug.c:1101 check_unmap+0x758/0x894()
 macb e000b000.ethernet: DMA-API: device driver failed to check map error[device address=0x000000002d171c02] [size=322 bytes] [mapped as single]
 Modules linked in:
 CPU: 0 PID: 619 Comm: udhcpc Not tainted 3.14.0-rc3-xilinx-00219-gd158fc7f #63
 [<c001516c>] (unwind_backtrace) from [<c0011df8>] (show_stack+0x10/0x14)
 [<c0011df8>] (show_stack) from [<c03c7714>] (dump_stack+0x7c/0xc8)
 [<c03c7714>] (dump_stack) from [<c00245cc>] (warn_slowpath_common+0x60/0x84)
 [<c00245cc>] (warn_slowpath_common) from [<c0024670>] (warn_slowpath_fmt+0x2c/0x3c)
 [<c0024670>] (warn_slowpath_fmt) from [<c0228244>] (check_unmap+0x758/0x894)
 [<c0228244>] (check_unmap) from [<c0228588>] (debug_dma_unmap_page+0x64/0x70)
 [<c0228588>] (debug_dma_unmap_page) from [<c02aba64>] (macb_interrupt+0x1f8/0x2dc)
 [<c02aba64>] (macb_interrupt) from [<c006c6e4>] (handle_irq_event_percpu+0x2c/0x178)
 [<c006c6e4>] (handle_irq_event_percpu) from [<c006c86c>] (handle_irq_event+0x3c/0x5c)
 [<c006c86c>] (handle_irq_event) from [<c006f548>] (handle_fasteoi_irq+0xb8/0x100)
 [<c006f548>] (handle_fasteoi_irq) from [<c006c148>] (generic_handle_irq+0x20/0x30)
 [<c006c148>] (generic_handle_irq) from [<c000f35c>] (handle_IRQ+0x64/0x8c)
 [<c000f35c>] (handle_IRQ) from [<c0008528>] (gic_handle_irq+0x3c/0x60)
 [<c0008528>] (gic_handle_irq) from [<c0012904>] (__irq_svc+0x44/0x78)
 Exception stack(0xed197f60 to 0xed197fa8)
 7f60: 00000134 60000013 bd94362e bd94362e be96b37c 00000014 fffffd72 00000122
 7f80: c000ebe4 ed196000 00000000 00000011 c032c0d8 ed197fa8 c0064008 c000ea20
 7fa0: 60000013 ffffffff
 [<c0012904>] (__irq_svc) from [<c000ea20>] (ret_fast_syscall+0x0/0x48)
 ---[ end trace 478f921d0d542d1e ]---
 Mapped at:
  [<c0227184>] debug_dma_map_page+0x48/0x11c
  [<c02aaca0>] macb_start_xmit+0x184/0x2a8
  [<c03143c0>] dev_hard_start_xmit+0x334/0x470
  [<c032c09c>] sch_direct_xmit+0x78/0x2f8
  [<c0314814>] __dev_queue_xmit+0x318/0x708

due to missing checks of the dma mapping. Add the appropriate checks to fix
this.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/cadence/macb.c

@@ -632,11 +632,16 @@ static void gem_rx_refill(struct macb *bp)
 					   "Unable to allocate sk_buff\n");
 				break;
 			}
-			bp->rx_skbuff[entry] = skb;
 
 			/* now fill corresponding descriptor entry */
 			paddr = dma_map_single(&bp->pdev->dev, skb->data,
 					       bp->rx_buffer_size, DMA_FROM_DEVICE);
+			if (dma_mapping_error(&bp->pdev->dev, paddr)) {
+				dev_kfree_skb(skb);
+				break;
+			}
+
+			bp->rx_skbuff[entry] = skb;
 
 			if (entry == RX_RING_SIZE - 1)
 				paddr |= MACB_BIT(RX_WRAP);
@@ -1036,11 +1041,15 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	entry = macb_tx_ring_wrap(bp->tx_head);
-	bp->tx_head++;
 	netdev_vdbg(bp->dev, "Allocated ring entry %u\n", entry);
 	mapping = dma_map_single(&bp->pdev->dev, skb->data,
 				 len, DMA_TO_DEVICE);
+	if (dma_mapping_error(&bp->pdev->dev, mapping)) {
+		kfree_skb(skb);
+		goto unlock;
+	}
 
+	bp->tx_head++;
 	tx_skb = &bp->tx_skb[entry];
 	tx_skb->skb = skb;
 	tx_skb->mapping = mapping;
@@ -1066,6 +1075,7 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (CIRC_SPACE(bp->tx_head, bp->tx_tail, TX_RING_SIZE) < 1)
 		netif_stop_queue(dev);
 
+unlock:
 	spin_unlock_irqrestore(&bp->lock, flags);
 
 	return NETDEV_TX_OK;