riscv: dts: canaan: Clean up serial aliases

The SoC-specific k210.dtsi declares aliases for all four serial ports.
However, none of the board-specific DTS files configure pin control for
any but the first serial port, so the last three ports are not usable.

Move the aliases node from the SoC-specific k210.dtsi to the
board-specific DTS files, as these are really board-specific, and retain
the sole port that is usable.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

arch/riscv/boot/dts/canaan/canaan_kd233.dts

@@ -15,6 +15,10 @@ / {
 	model = "Kendryte KD233";
 	compatible = "canaan,kendryte-kd233", "canaan,kendryte-k210";
 
+	aliases {
+		serial0 = &uarths0;
+	};
+
 	chosen {
 		bootargs = "earlycon console=ttySIF0";
 		stdout-path = "serial0:115200n8";

arch/riscv/boot/dts/canaan/k210.dtsi

@@ -16,13 +16,6 @@ / {
 	#size-cells = <1>;
 	compatible = "canaan,kendryte-k210";
 
-	aliases {
-		serial0 = &uarths0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
 	/*
 	 * The K210 has an sv39 MMU following the privileged specification v1.9.
 	 * Since this is a non-ratified draft specification, the kernel does not

arch/riscv/boot/dts/canaan/k210_generic.dts

@@ -15,6 +15,10 @@ / {
 	model = "Kendryte K210 generic";
 	compatible = "canaan,kendryte-k210";
 
+	aliases {
+		serial0 = &uarths0;
+	};
+
 	chosen {
 		bootargs = "earlycon console=ttySIF0";
 		stdout-path = "serial0:115200n8";

arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts

@@ -17,6 +17,10 @@ / {
 	compatible = "sipeed,maix-bit", "sipeed,maix-bitm",
 		     "canaan,kendryte-k210";
 
+	aliases {
+		serial0 = &uarths0;
+	};
+
 	chosen {
 		bootargs = "earlycon console=ttySIF0";
 		stdout-path = "serial0:115200n8";

arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts

@@ -17,6 +17,10 @@ / {
 	compatible = "sipeed,maix-dock-m1", "sipeed,maix-dock-m1w",
 		     "canaan,kendryte-k210";
 
+	aliases {
+		serial0 = &uarths0;
+	};
+
 	chosen {
 		bootargs = "earlycon console=ttySIF0";
 		stdout-path = "serial0:115200n8";

arch/riscv/boot/dts/canaan/sipeed_maix_go.dts

@@ -16,6 +16,10 @@ / {
 	model = "SiPeed MAIX GO";
 	compatible = "sipeed,maix-go", "canaan,kendryte-k210";
 
+	aliases {
+		serial0 = &uarths0;
+	};
+
 	chosen {
 		bootargs = "earlycon console=ttySIF0";
 		stdout-path = "serial0:115200n8";

arch/riscv/boot/dts/canaan/sipeed_maixduino.dts

@@ -15,6 +15,10 @@ / {
 	model = "SiPeed MAIXDUINO";
 	compatible = "sipeed,maixduino", "canaan,kendryte-k210";
 
+	aliases {
+		serial0 = &uarths0;
+	};
+
 	chosen {
 		bootargs = "earlycon console=ttySIF0";
 		stdout-path = "serial0:115200n8";