Commit 923ac7f7 authored by Darron Broad's avatar Darron Broad Committed by Mauro Carvalho Chehab

V4L/DVB (9228): cx88: Add audio routing for the hvr-3000/4000

This adds audio routing on the hvr-3000/4000

This is a preliminary patch for later routing
requirements.

This adds line-in support on the 2 cards mentioned.
It is also apparent that there is an initial open
fault for line-in when opening composite/s-video.
This will be fixed later.

It was also noticed that the bit-field for audio
routing which was 2 bits needs an increase as
the WM8775 for example, allows a value 4 bits
wide for it's audio mux.
Signed-off-by: default avatarDarron Broad <darron@kewl.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 59b1842d
......@@ -1277,18 +1277,22 @@ static const struct cx88_board cx88_boards[] = {
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
.audio_chip = V4L2_IDENT_WM8775,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x84bf,
.audioroute = 1,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x84bf,
.audioroute = 2,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x84bf,
.audioroute = 2,
}},
.mpeg = CX88_MPEG_DVB,
.num_frontends = 2,
......@@ -1717,6 +1721,7 @@ static const struct cx88_board cx88_boards[] = {
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
.audio_chip = V4L2_IDENT_WM8775,
/*
* GPIO0 (WINTV2000)
*
......@@ -1751,14 +1756,17 @@ static const struct cx88_board cx88_boards[] = {
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0xc4bf,
.audioroute = 1,
}, {
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0xc4bf,
.audioroute = 2,
}, {
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0xc4bf,
.audioroute = 2,
} },
/* fixme: Add radio support */
.mpeg = CX88_MPEG_DVB,
......
......@@ -247,7 +247,7 @@ struct cx88_input {
enum cx88_itype type;
u32 gpio0, gpio1, gpio2, gpio3;
unsigned int vmux:2;
unsigned int audioroute:2;
unsigned int audioroute:4;
};
struct cx88_board {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment