Commit 9243d70e authored by Xinlei Lee's avatar Xinlei Lee Committed by Chun-Kuang Hu

drm/mediatek: dp: Change the aux retries times when receiving AUX_DEFER

DP 1.4a Section 2.8.7.1.5.6.1:
A DP Source device shall retry at least seven times upon receiving
AUX_DEFER before giving up the AUX transaction.

The drm_dp_i2c_do_msg() function in the drm_dp_helper.c file will
judge the status of the msg->reply parameter passed to aux_transfer
for different processing.

Fixes: f70ac097 ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: default avatarXinlei Lee <xinlei.lee@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/1680072203-10394-1-git-send-email-xinlei.lee@mediatek.com/Signed-off-by: default avatarChun-Kuang Hu <chunkuang.hu@kernel.org>
parent d6dc3cdc
......@@ -806,10 +806,9 @@ static int mtk_dp_aux_wait_for_completion(struct mtk_dp *mtk_dp, bool is_read)
}
static int mtk_dp_aux_do_transfer(struct mtk_dp *mtk_dp, bool is_read, u8 cmd,
u32 addr, u8 *buf, size_t length)
u32 addr, u8 *buf, size_t length, u8 *reply_cmd)
{
int ret;
u32 reply_cmd;
if (is_read && (length > DP_AUX_MAX_PAYLOAD_BYTES ||
(cmd == DP_AUX_NATIVE_READ && !length)))
......@@ -841,10 +840,10 @@ static int mtk_dp_aux_do_transfer(struct mtk_dp *mtk_dp, bool is_read, u8 cmd,
/* Wait for feedback from sink device. */
ret = mtk_dp_aux_wait_for_completion(mtk_dp, is_read);
reply_cmd = mtk_dp_read(mtk_dp, MTK_DP_AUX_P0_3624) &
AUX_RX_REPLY_COMMAND_AUX_TX_P0_MASK;
*reply_cmd = mtk_dp_read(mtk_dp, MTK_DP_AUX_P0_3624) &
AUX_RX_REPLY_COMMAND_AUX_TX_P0_MASK;
if (ret || reply_cmd) {
if (ret) {
u32 phy_status = mtk_dp_read(mtk_dp, MTK_DP_AUX_P0_3628) &
AUX_RX_PHY_STATE_AUX_TX_P0_MASK;
if (phy_status != AUX_RX_PHY_STATE_AUX_TX_P0_RX_IDLE) {
......@@ -2071,7 +2070,7 @@ static ssize_t mtk_dp_aux_transfer(struct drm_dp_aux *mtk_aux,
ret = mtk_dp_aux_do_transfer(mtk_dp, is_read, request,
msg->address + accessed_bytes,
msg->buffer + accessed_bytes,
to_access);
to_access, &msg->reply);
if (ret) {
drm_info(mtk_dp->drm_dev,
......@@ -2081,7 +2080,6 @@ static ssize_t mtk_dp_aux_transfer(struct drm_dp_aux *mtk_aux,
accessed_bytes += to_access;
} while (accessed_bytes < msg->size);
msg->reply = DP_AUX_NATIVE_REPLY_ACK | DP_AUX_I2C_REPLY_ACK;
return msg->size;
err:
msg->reply = DP_AUX_NATIVE_REPLY_NACK | DP_AUX_I2C_REPLY_NACK;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment