thermal: Remove core header inclusion from drivers

As the name states "thermal_core.h" is the header file for the core
components of the thermal framework.

Too many drivers are including it. Hopefully the recent cleanups
helped to self encapsulate the code a bit more and prevented the
drivers to need this header.

Remove this inclusion in every place where it is possible.

Some other drivers did a confusion with the core header and the one
exported in linux/thermal.h. They include the former instead of the
latter. The changes also fix this.

The tegra/soctherm driver still remains as it uses an internal
function which need to be replaced.

The Intel HFI driver uses the netlink internal framework core and
should be changed to prevent to deal with the internals.

No functional changes intended.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # armada_thermal.c
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> # uniphier_thermal.c
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> # rcar_gen3_thermal.c
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # amlogic_thermal.c
Acked-by: Florian Fainelli <f.fainelli@gmail.com> # bcm2835_thermal.c
Acked-by: Thierry Reding <treding@nvidia.com> # tegra30-tsensor.c
Link: https://lore.kernel.org/r/20230206153432.1017282-1-daniel.lezcano@linaro.orgSigned-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

drivers/thermal/amlogic_thermal.c

@@ -28,7 +28,6 @@
 #include <linux/regmap.h>
 #include <linux/thermal.h>
 
-#include "thermal_core.h"
 #include "thermal_hwmon.h"
 
 #define TSENSOR_CFG_REG1			0x4

drivers/thermal/armada_thermal.c

@@ -19,8 +19,6 @@
 #include <linux/regmap.h>
 #include <linux/interrupt.h>
 
-#include "thermal_core.h"
-
 /* Thermal Manager Control and Status Register */
 #define PMU_TDC0_SW_RST_MASK		(0x1 << 1)
 #define PMU_TM_DISABLE_OFFS		0

drivers/thermal/broadcom/bcm2835_thermal.c

@@ -18,7 +18,6 @@
 #include <linux/platform_device.h>
 #include <linux/thermal.h>
 
-#include "../thermal_core.h"
 #include "../thermal_hwmon.h"
 
 #define BCM2835_TS_TSENSCTL			0x00

drivers/thermal/hisi_thermal.c

@@ -16,8 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/of_device.h>
-
-#include "thermal_core.h"
+#include <linux/thermal.h>
 
 #define HI6220_TEMP0_LAG			(0x0)
 #define HI6220_TEMP0_TH				(0x4)

drivers/thermal/imx8mm_thermal.c

@@ -17,7 +17,6 @@
 #include <linux/slab.h>
 #include <linux/thermal.h>
 
-#include "thermal_core.h"
 #include "thermal_hwmon.h"
 
 #define TER			0x0	/* TMU enable */

drivers/thermal/imx_sc_thermal.c

@@ -13,7 +13,6 @@
 #include <linux/slab.h>
 #include <linux/thermal.h>
 
-#include "thermal_core.h"
 #include "thermal_hwmon.h"
 
 #define IMX_SC_MISC_FUNC_GET_TEMP	13

drivers/thermal/intel/intel_hfi.c

@@ -40,10 +40,11 @@
 
 #include <asm/msr.h>
 
-#include "../thermal_core.h"
 #include "intel_hfi.h"
 #include "thermal_interrupt.h"
 
+#include "../thermal_netlink.h"
+
 /* Hardware Feedback Interface MSR configuration bits */
 #define HW_FEEDBACK_PTR_VALID_BIT		BIT(0)
 #define HW_FEEDBACK_CONFIG_HFI_ENABLE_BIT	BIT(0)

drivers/thermal/qcom/qcom-spmi-temp-alarm.c

@@ -15,7 +15,6 @@
 #include <linux/regmap.h>
 #include <linux/thermal.h>
 
-#include "../thermal_core.h"
 #include "../thermal_hwmon.h"
 
 #define QPNP_TM_REG_DIG_MAJOR		0x01

drivers/thermal/qoriq_thermal.c

@@ -13,7 +13,6 @@
 #include <linux/thermal.h>
 #include <linux/units.h>
 
-#include "thermal_core.h"
 #include "thermal_hwmon.h"
 
 #define SITES_MAX		16

drivers/thermal/rcar_gen3_thermal.c

@@ -17,7 +17,6 @@
 #include <linux/sys_soc.h>
 #include <linux/thermal.h>
 
-#include "thermal_core.h"
 #include "thermal_hwmon.h"
 
 /* Register offsets */

drivers/thermal/samsung/exynos_tmu.c

@@ -20,11 +20,10 @@
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
+#include <linux/thermal.h>
 
 #include <dt-bindings/thermal/thermal_exynos.h>
 
-#include "../thermal_core.h"
-
 /* Exynos generic registers */
 #define EXYNOS_TMU_REG_TRIMINFO		0x0
 #define EXYNOS_TMU_REG_CONTROL		0x20

drivers/thermal/st/stm_thermal.c

@@ -19,7 +19,6 @@
 #include <linux/platform_device.h>
 #include <linux/thermal.h>
 
-#include "../thermal_core.h"
 #include "../thermal_hwmon.h"
 
 /* DTS register offsets */

drivers/thermal/tegra/tegra30-tsensor.c

@@ -28,7 +28,6 @@
 
 #include <soc/tegra/fuse.h>
 
-#include "../thermal_core.h"
 #include "../thermal_hwmon.h"
 
 #define TSENSOR_SENSOR0_CONFIG0				0x0

drivers/thermal/uniphier_thermal.c

@@ -17,8 +17,6 @@
 #include <linux/regmap.h>
 #include <linux/thermal.h>
 
-#include "thermal_core.h"
-
 /*
  * block registers
  * addresses are the offset from .block_base