[media] em28xx: move vinmode and vinctrl data from struct em28xx to struct v4l2

The video input mode and control data also belong only to the
analog side. move them to struct em28xx_v4l.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/usb/em28xx/em28xx-camera.c

@@ -372,8 +372,8 @@ int em28xx_init_camera(struct em28xx *dev)
 			break;
 		}
 		/* probably means GRGB 16 bit bayer */
-		dev->vinmode = 0x0d;
-		dev->vinctl = 0x00;
+		v4l2->vinmode = 0x0d;
+		v4l2->vinctl = 0x00;
 
 		break;
 	}
@@ -384,8 +384,8 @@ int em28xx_init_camera(struct em28xx *dev)
 		em28xx_initialize_mt9m001(dev);
 
 		/* probably means BGGR 16 bit bayer */
-		dev->vinmode = 0x0c;
-		dev->vinctl = 0x00;
+		v4l2->vinmode = 0x0c;
+		v4l2->vinctl = 0x00;
 
 		break;
 	case EM28XX_MT9M111:
@@ -396,8 +396,8 @@ int em28xx_init_camera(struct em28xx *dev)
 		em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk);
 		em28xx_initialize_mt9m111(dev);
 
-		dev->vinmode = 0x0a;
-		dev->vinctl = 0x00;
+		v4l2->vinmode = 0x0a;
+		v4l2->vinctl = 0x00;
 
 		break;
 	case EM28XX_OV2640:
@@ -438,8 +438,8 @@ int em28xx_init_camera(struct em28xx *dev)
 		/* NOTE: for UXGA=1600x1200 switch to 12MHz */
 		dev->board.xclk = EM28XX_XCLK_FREQUENCY_24MHZ;
 		em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk);
-		dev->vinmode = 0x08;
-		dev->vinctl = 0x00;
+		v4l2->vinmode = 0x08;
+		v4l2->vinctl = 0x00;
 
 		break;
 	}

drivers/media/usb/em28xx/em28xx-video.c

@@ -236,11 +236,11 @@ static int em28xx_set_outfmt(struct em28xx *dev)
 	if (ret < 0)
 		return ret;
 
-	ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, dev->vinmode);
+	ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, v4l2->vinmode);
 	if (ret < 0)
 		return ret;
 
-	vinctrl = dev->vinctl;
+	vinctrl = v4l2->vinctl;
 	if (em28xx_vbi_supported(dev) == 1) {
 		vinctrl |= EM28XX_VINCTRL_VBI_RAW;
 		em28xx_write_reg(dev, EM28XX_R34_VBI_START_H, 0x00);
@@ -2312,9 +2312,9 @@ static int em28xx_v4l2_init(struct em28xx *dev)
 	/*
 	 * Default format, used for tvp5150 or saa711x output formats
 	 */
-	dev->vinmode = 0x10;
-	dev->vinctl  = EM28XX_VINCTRL_INTERLACED |
-		       EM28XX_VINCTRL_CCIR656_ENABLE;
+	v4l2->vinmode = 0x10;
+	v4l2->vinctl  = EM28XX_VINCTRL_INTERLACED |
+			EM28XX_VINCTRL_CCIR656_ENABLE;
 
 	/* request some modules */
 

drivers/media/usb/em28xx/em28xx.h

@@ -516,6 +516,9 @@ struct em28xx_v4l2 {
 	struct mutex vb_queue_lock;
 	struct mutex vb_vbi_queue_lock;
 
+	u8 vinmode;
+	u8 vinctl;
+
 	/* Frame properties */
 	int width;		/* current frame width */
 	int height;		/* current frame height */
@@ -598,9 +601,6 @@ struct em28xx {
 	/* Progressive (non-interlaced) mode */
 	int progressive;
 
-	/* Vinmode/Vinctl used at the driver */
-	int vinmode, vinctl;
-
 	/* Controls audio streaming */
 	struct work_struct wq_trigger;	/* Trigger to start/stop audio for alsa module */
 	atomic_t       stream_started;	/* stream should be running if true */