Skip to content

L
linux
Commit 93177d1f authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman
Browse files
Options

Merge tag 'usb-serial-3.18-rc1' of... 

Merge tag 'usb-serial-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next

Johan writes:

USB-serial updates for v3.18-rc1

These changes add two new "simple" drivers, while removing the redundant
zte_ev driver (PIDs moved to option).

Included are also some minor clean ups to the xsens_mt driver, and the
enabling of further baud rates for pl2303 devices.
Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
parents 18f340f9 f8c0e057
Hide whitespace changes
Inline Side-by-side
Showing with 42 additions and 342 deletions
drivers/usb/serial/Kconfig
View file @ 93177d1f
......@@ -58,9 +58,11 @@ config USB_SERIAL_SIMPLE
handles a wide range of very simple devices, all in one
driver. Specifically, it supports:
- Suunto ANT+ USB device.
- Medtronic CareLink USB device
- Fundamental Software dongle.
- HP4x calculators
- a number of Motorola phones
- Novatel Wireless GPS receivers
- Siemens USB/MPI adapter.
- ViVOtech ViVOpay USB device.
- Infineon Modem Flashloader USB interface
......@@ -682,14 +684,6 @@ config USB_SERIAL_WISHBONE
To compile this driver as a module, choose M here: the
module will be called wishbone-serial.
config USB_SERIAL_ZTE
tristate "ZTE USB serial driver"
help
Say Y here if you want to use a ZTE USB to serial device.
To compile this driver as a module, choose M here: the
module will be called zte.
config USB_SERIAL_SSU100
tristate "USB Quatech SSU-100 Single Port Serial Driver"
help
......
drivers/usb/serial/Makefile
View file @ 93177d1f
......@@ -60,4 +60,3 @@ obj-$(CONFIG_USB_SERIAL_WISHBONE) += wishbone-serial.o
obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o
obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o
obj-$(CONFIG_USB_SERIAL_XSENS_MT) += xsens_mt.o
obj-$(CONFIG_USB_SERIAL_ZTE) += zte_ev.o
drivers/usb/serial/option.c
View file @ 93177d1f
......@@ -276,6 +276,7 @@ static void option_instat_callback(struct urb *urb);
#define ZTE_PRODUCT_MF628 0x0015
#define ZTE_PRODUCT_MF626 0x0031
#define ZTE_PRODUCT_AC2726 0xfff1
#define ZTE_PRODUCT_MG880 0xfffd
#define ZTE_PRODUCT_CDMA_TECH 0xfffe
#define ZTE_PRODUCT_AC8710T 0xffff
#define ZTE_PRODUCT_MC2718 0xffe8
......@@ -1560,7 +1561,15 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff92, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffec, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffee, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff6, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff7, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff8, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff9, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfffb, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfffc, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MG880, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
......
drivers/usb/serial/pl2303.c
View file @ 93177d1f
......@@ -162,6 +162,9 @@ static const struct pl2303_type_data pl2303_type_data[TYPE_COUNT] = {
.max_baud_rate = 1228800,
.quirks = PL2303_QUIRK_LEGACY,
},
[TYPE_HX] = {
.max_baud_rate = 12000000,
},
};
static int pl2303_vendor_read(struct usb_serial *serial, u16 value,
......@@ -395,16 +398,14 @@ static void pl2303_encode_baud_rate(struct tty_struct *tty,
if (spriv->type->max_baud_rate)
baud = min_t(speed_t, baud, spriv->type->max_baud_rate);
/*
* Set baud rate to nearest supported value.
*
* NOTE: Baud rate 500k can only be set using divisors.
* Use direct method for supported baud rates, otherwise use divisors.
*/
baud_sup = pl2303_get_supported_baud_rate(baud);
if (baud == 500000)
baud = pl2303_encode_baud_rate_divisor(buf, baud);
if (baud == baud_sup)
baud = pl2303_encode_baud_rate_direct(buf, baud);
else
baud = pl2303_encode_baud_rate_direct(buf, baud_sup);
baud = pl2303_encode_baud_rate_divisor(buf, baud);
/* Save resulting baud rate */
tty_encode_baud_rate(tty, baud, baud);
......
drivers/usb/serial/usb-serial-simple.c
View file @ 93177d1f
......@@ -20,7 +20,7 @@
#include <linux/usb.h>
#include <linux/usb/serial.h>
#define DEVICE(vendor, IDS) \
#define DEVICE_N(vendor, IDS, nport) \
static const struct usb_device_id vendor##_id_table[] = { \
IDS(), \
{ }, \
......@@ -31,9 +31,15 @@ static struct usb_serial_driver vendor##_device = { \
.name = #vendor, \
}, \
.id_table = vendor##_id_table, \
.num_ports = 1, \
.num_ports = nport, \
};
#define DEVICE(vendor, IDS) DEVICE_N(vendor, IDS, 1)
/* Medtronic CareLink USB driver */
#define CARELINK_IDS() \
{ USB_DEVICE(0x0a21, 0x8001) } /* MMT-7305WW */
DEVICE(carelink, CARELINK_IDS);
/* ZIO Motherboard USB driver */
#define ZIO_IDS() \
......@@ -64,6 +70,11 @@ DEVICE(vivopay, VIVOPAY_IDS);
{ USB_DEVICE(0x22b8, 0x2c64) } /* Motorola V950 phone */
DEVICE(moto_modem, MOTO_IDS);
/* Novatel Wireless GPS driver */
#define NOVATEL_IDS() \
{ USB_DEVICE(0x09d7, 0x0100) } /* NovAtel FlexPack GPS */
DEVICE_N(novatel_gps, NOVATEL_IDS, 3);
/* HP4x (48/49) Generic Serial driver */
#define HP4X_IDS() \
{ USB_DEVICE(0x03f0, 0x0121) }
......@@ -82,11 +93,13 @@ DEVICE(siemens_mpi, SIEMENS_IDS);
/* All of the above structures mushed into two lists */
static struct usb_serial_driver * const serial_drivers[] = {
&carelink_device,
&zio_device,
&funsoft_device,
&flashloader_device,
&vivopay_device,
&moto_modem_device,
&novatel_gps_device,
&hp4x_device,
&suunto_device,
&siemens_mpi_device,
......@@ -94,11 +107,13 @@ static struct usb_serial_driver * const serial_drivers[] = {
};
static const struct usb_device_id id_table[] = {
CARELINK_IDS(),
ZIO_IDS(),
FUNSOFT_IDS(),
FLASHLOADER_IDS(),
VIVOPAY_IDS(),
MOTO_IDS(),
NOVATEL_IDS(),
HP4X_IDS(),
SUUNTO_IDS(),
SIEMENS_IDS(),
......
drivers/usb/serial/xsens_mt.c
View file @ 93177d1f
......@@ -41,28 +41,13 @@ static const struct usb_device_id id_table[] = {
};
MODULE_DEVICE_TABLE(usb, id_table);
static int has_required_endpoints(const struct usb_host_interface *interface)
{
__u8 i;
int has_bulk_in = 0;
int has_bulk_out = 0;
for (i = 0; i < interface->desc.bNumEndpoints; ++i) {
if (usb_endpoint_is_bulk_in(&interface->endpoint[i].desc))
has_bulk_in = 1;
else if (usb_endpoint_is_bulk_out(&interface->endpoint[i].desc))
has_bulk_out = 1;
}
return has_bulk_in && has_bulk_out;
}
static int xsens_mt_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
if (!has_required_endpoints(serial->interface->cur_altsetting))
return -ENODEV;
return 0;
if (serial->interface->cur_altsetting->desc.bInterfaceNumber == 1)
return 0;
return -ENODEV;
}
static struct usb_serial_driver xsens_mt_device = {
......@@ -82,4 +67,6 @@ static struct usb_serial_driver * const serial_drivers[] = {
module_usb_serial_driver(serial_drivers, id_table);
MODULE_AUTHOR("Frans Klaver <frans.klaver@xsens.com>");
MODULE_DESCRIPTION("USB-serial driver for Xsens motion trackers");
MODULE_LICENSE("GPL");
drivers/usb/serial/zte_ev.c deleted 100644 → 0
View file @ 18f340f9
/*
* ZTE_EV USB serial driver
*
* Copyright (C) 2012 Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Copyright (C) 2012 Linux Foundation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This driver is based on code found in a ZTE_ENV patch that modified
* the usb-serial generic driver. Comments were left in that I think
* show the commands used to talk to the device, but I am not sure.
*/
#include <linux/kernel.h>
#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <linux/uaccess.h>
#define MAX_SETUP_DATA_SIZE 32
static void debug_data(struct device *dev, const char *function, int len,
const unsigned char *data, int result)
{
dev_dbg(dev, "result = %d\n", result);
if (result == len)
dev_dbg(dev, "%s - length = %d, data = %*ph\n", function,
len, len, data);
}
static int zte_ev_usb_serial_open(struct tty_struct *tty,
struct usb_serial_port *port)
{
struct usb_device *udev = port->serial->dev;
struct device *dev = &port->dev;
int result = 0;
int len;
unsigned char *buf;
buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
if (!buf)
return -ENOMEM;
/* send 1st ctl cmd(CTL 21 22 01 00 00 00 00 00) */
len = 0;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0001, 0x0000, NULL, len,
USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 2st cmd and receive data */
/*
* 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 25.1.0(5)
* 16.0 DI 00 96 00 00 00 00 08
*/
len = 0x0007;
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 3rd cmd */
/*
* 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 30.1.0
* 16.0 DO 80 25 00 00 00 00 08 .%..... 30.2.0
*/
len = 0x0007;
buf[0] = 0x80;
buf[1] = 0x25;
buf[2] = 0x00;
buf[3] = 0x00;
buf[4] = 0x00;
buf[5] = 0x00;
buf[6] = 0x08;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 4th cmd */
/*
* 16.0 CTL 21 22 03 00 00 00 00 00
*/
len = 0;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 5th cmd */
/*
* 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 33.1.0
* 16.0 DI 80 25 00 00 00 00 08
*/
len = 0x0007;
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 6th cmd */
/*
* 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 34.1.0
* 16.0 DO 80 25 00 00 00 00 08
*/
len = 0x0007;
buf[0] = 0x80;
buf[1] = 0x25;
buf[2] = 0x00;
buf[3] = 0x00;
buf[4] = 0x00;
buf[5] = 0x00;
buf[6] = 0x08;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
kfree(buf);
return usb_serial_generic_open(tty, port);
}
/*
* CTL 21 22 02 00 00 00 00 00 CLASS 338.1.0
*
* 16.1 DI a1 20 00 00 00 00 02 00 02 00 . ........ 340.1.0
* 16.0 CTL 21 22 03 00 00 00 00 00 CLASS 341.1.0
*
* 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 346.1.0(3)
* 16.0 DI 00 08 07 00 00 00 08 ....... 346.2.0
*
* 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 349.1.0
* 16.0 DO 00 c2 01 00 00 00 08 ....... 349.2.0
*
* 16.0 CTL 21 22 03 00 00 00 00 00 CLASS 350.1.0(2)
*
* 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 352.1.0
* 16.0 DI 00 c2 01 00 00 00 08 ....... 352.2.0
*
* 16.1 DI a1 20 00 00 00 00 02 00 02 00 . ........ 353.1.0
*
* 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 354.1.0
* 16.0 DO 00 c2 01 00 00 00 08 ....... 354.2.0
*
* 16.0 CTL 21 22 03 00 00 00 00 00
*/
static void zte_ev_usb_serial_close(struct usb_serial_port *port)
{
struct usb_device *udev = port->serial->dev;
struct device *dev = &port->dev;
int result = 0;
int len;
unsigned char *buf;
buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
if (!buf)
return;
/* send 1st ctl cmd(CTL 21 22 02 00 00 00 00 00) */
len = 0;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0002, 0x0000, NULL, len,
USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 2st ctl cmd(CTL 21 22 03 00 00 00 00 00 ) */
len = 0;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 3st cmd and recieve data */
/*
* 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 25.1.0(5)
* 16.0 DI 00 08 07 00 00 00 08
*/
len = 0x0007;
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 4th cmd */
/*
* 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 30.1.0
* 16.0 DO 00 c2 01 00 00 00 08 .%..... 30.2.0
*/
len = 0x0007;
buf[0] = 0x00;
buf[1] = 0xc2;
buf[2] = 0x01;
buf[3] = 0x00;
buf[4] = 0x00;
buf[5] = 0x00;
buf[6] = 0x08;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 5th cmd */
/*
* 16.0 CTL 21 22 03 00 00 00 00 00
*/
len = 0;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 6th cmd */
/*
* 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 33.1.0
* 16.0 DI 00 c2 01 00 00 00 08
*/
len = 0x0007;
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 7th cmd */
/*
* 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 354.1.0
* 16.0 DO 00 c2 01 00 00 00 08 ....... 354.2.0
*/
len = 0x0007;
buf[0] = 0x00;
buf[1] = 0xc2;
buf[2] = 0x01;
buf[3] = 0x00;
buf[4] = 0x00;
buf[5] = 0x00;
buf[6] = 0x08;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 8th cmd */
/*
* 16.0 CTL 21 22 03 00 00 00 00 00
*/
len = 0;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
kfree(buf);
usb_serial_generic_close(port);
}
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x19d2, 0xffec) },
{ USB_DEVICE(0x19d2, 0xffee) },
{ USB_DEVICE(0x19d2, 0xfff6) },
{ USB_DEVICE(0x19d2, 0xfff7) },
{ USB_DEVICE(0x19d2, 0xfff8) },
{ USB_DEVICE(0x19d2, 0xfff9) },
{ USB_DEVICE(0x19d2, 0xfffb) },
{ USB_DEVICE(0x19d2, 0xfffc) },
/* MG880 */
{ USB_DEVICE(0x19d2, 0xfffd) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
static struct usb_serial_driver zio_device = {
.driver = {
.owner = THIS_MODULE,
.name = "zte_ev",
},
.id_table = id_table,
.num_ports = 1,
.open = zte_ev_usb_serial_open,
.close = zte_ev_usb_serial_close,
};
static struct usb_serial_driver * const serial_drivers[] = {
&zio_device, NULL
};
module_usb_serial_driver(serial_drivers, id_table);
MODULE_LICENSE("GPL v2");
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7