Commit 93235bfd authored by Daniel Vetter's avatar Daniel Vetter

Merge tag 'amd-drm-fixes-6.2-2023-01-04' of...

Merge tag 'amd-drm-fixes-6.2-2023-01-04' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.2-2023-01-04:

amdgpu:
- DCN 3.2 fix
- Display fix

amdkfd:
- Fix kernel warning
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230105033839.23711-1-alexander.deucher@amd.com
parents 83e79ae3 6fe6ece3
......@@ -195,6 +195,7 @@ extern int amdgpu_emu_mode;
extern uint amdgpu_smu_memory_pool_size;
extern int amdgpu_smu_pptable_id;
extern uint amdgpu_dc_feature_mask;
extern uint amdgpu_freesync_vid_mode;
extern uint amdgpu_dc_debug_mask;
extern uint amdgpu_dc_visual_confirm;
extern uint amdgpu_dm_abm_level;
......
......@@ -181,6 +181,7 @@ int amdgpu_mes_kiq;
int amdgpu_noretry = -1;
int amdgpu_force_asic_type = -1;
int amdgpu_tmz = -1; /* auto */
uint amdgpu_freesync_vid_mode;
int amdgpu_reset_method = -1; /* auto */
int amdgpu_num_kcq = -1;
int amdgpu_smartshift_bias;
......@@ -879,6 +880,32 @@ module_param_named(backlight, amdgpu_backlight, bint, 0444);
MODULE_PARM_DESC(tmz, "Enable TMZ feature (-1 = auto (default), 0 = off, 1 = on)");
module_param_named(tmz, amdgpu_tmz, int, 0444);
/**
* DOC: freesync_video (uint)
* Enable the optimization to adjust front porch timing to achieve seamless
* mode change experience when setting a freesync supported mode for which full
* modeset is not needed.
*
* The Display Core will add a set of modes derived from the base FreeSync
* video mode into the corresponding connector's mode list based on commonly
* used refresh rates and VRR range of the connected display, when users enable
* this feature. From the userspace perspective, they can see a seamless mode
* change experience when the change between different refresh rates under the
* same resolution. Additionally, userspace applications such as Video playback
* can read this modeset list and change the refresh rate based on the video
* frame rate. Finally, the userspace can also derive an appropriate mode for a
* particular refresh rate based on the FreeSync Mode and add it to the
* connector's mode list.
*
* Note: This is an experimental feature.
*
* The default value: 0 (off).
*/
MODULE_PARM_DESC(
freesync_video,
"Enable freesync modesetting optimization feature (0 = off (default), 1 = on)");
module_param_named(freesync_video, amdgpu_freesync_vid_mode, uint, 0444);
/**
* DOC: reset_method (int)
* GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco)
......
......@@ -801,7 +801,7 @@ static int kfd_build_sysfs_node_entry(struct kfd_topology_device *dev,
p2plink->attr.name = "properties";
p2plink->attr.mode = KFD_SYSFS_FILE_MODE;
sysfs_attr_init(&iolink->attr);
sysfs_attr_init(&p2plink->attr);
ret = sysfs_create_file(p2plink->kobj, &p2plink->attr);
if (ret < 0)
return ret;
......
......@@ -5835,7 +5835,8 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector,
*/
DRM_DEBUG_DRIVER("No preferred mode found\n");
} else {
recalculate_timing = is_freesync_video_mode(&mode, aconnector);
recalculate_timing = amdgpu_freesync_vid_mode &&
is_freesync_video_mode(&mode, aconnector);
if (recalculate_timing) {
freesync_mode = get_highest_refresh_rate_mode(aconnector, false);
drm_mode_copy(&saved_mode, &mode);
......@@ -6986,7 +6987,7 @@ static void amdgpu_dm_connector_add_freesync_modes(struct drm_connector *connect
struct amdgpu_dm_connector *amdgpu_dm_connector =
to_amdgpu_dm_connector(connector);
if (!edid)
if (!(amdgpu_freesync_vid_mode && edid))
return;
if (amdgpu_dm_connector->max_vfreq - amdgpu_dm_connector->min_vfreq > 10)
......@@ -8850,7 +8851,8 @@ static int dm_update_crtc_state(struct amdgpu_display_manager *dm,
* TODO: Refactor this function to allow this check to work
* in all conditions.
*/
if (dm_new_crtc_state->stream &&
if (amdgpu_freesync_vid_mode &&
dm_new_crtc_state->stream &&
is_timing_unchanged_for_freesync(new_crtc_state, old_crtc_state))
goto skip_modeset;
......@@ -8885,7 +8887,7 @@ static int dm_update_crtc_state(struct amdgpu_display_manager *dm,
if (!dm_old_crtc_state->stream)
goto skip_modeset;
if (dm_new_crtc_state->stream &&
if (amdgpu_freesync_vid_mode && dm_new_crtc_state->stream &&
is_timing_unchanged_for_freesync(new_crtc_state,
old_crtc_state)) {
new_crtc_state->mode_changed = false;
......@@ -8897,7 +8899,7 @@ static int dm_update_crtc_state(struct amdgpu_display_manager *dm,
set_freesync_fixed_config(dm_new_crtc_state);
goto skip_modeset;
} else if (aconnector &&
} else if (amdgpu_freesync_vid_mode && aconnector &&
is_freesync_video_mode(&new_crtc_state->mode,
aconnector)) {
struct drm_display_mode *high_mode;
......
......@@ -6257,12 +6257,12 @@ bool dml32_CalculateDETSwathFillLatencyHiding(unsigned int NumberOfActiveSurface
double SwathSizePerSurfaceC[DC__NUM_DPP__MAX];
bool NotEnoughDETSwathFillLatencyHiding = false;
/* calculate sum of single swath size for all pipes in bytes*/
/* calculate sum of single swath size for all pipes in bytes */
for (k = 0; k < NumberOfActiveSurfaces; k++) {
SwathSizePerSurfaceY[k] += SwathHeightY[k] * SwathWidthY[k] * BytePerPixelInDETY[k] * NumOfDPP[k];
SwathSizePerSurfaceY[k] = SwathHeightY[k] * SwathWidthY[k] * BytePerPixelInDETY[k] * NumOfDPP[k];
if (SwathHeightC[k] != 0)
SwathSizePerSurfaceC[k] += SwathHeightC[k] * SwathWidthC[k] * BytePerPixelInDETC[k] * NumOfDPP[k];
SwathSizePerSurfaceC[k] = SwathHeightC[k] * SwathWidthC[k] * BytePerPixelInDETC[k] * NumOfDPP[k];
else
SwathSizePerSurfaceC[k] = 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment